GeoGround 3D Analyzer App User Guide
- June 13, 2024
- GeoGround
Table of Contents
GeoGround 3D Analyzer App
CONNECTION
Download the app
Read the code on the cover, or enter the Play Store and type in Search field
“Geoground 3D Analyzer”. Install the application on your smart device and
follow the steps below to connect with your new device.
After launching the app, you will first see an alert to start searching for
your device, choose your device from the list of available devices and give
the necessary permissions to the app for the connection.
Note: In order to Quickly connect of disconnect , we press the connection icon located in the status bar at the top of the main screen.
After entering the 3D ground scanning option in the application, the system settings screen will appear in front of us first.
Before we adjust the settings of the ground scanning system from the application, the user must first specify the path that he will take during the search and the starting point of the direction in the specified path, in order to make the device determine and study the target area more accurately.
Path & Direction
Path: From this option, we can specify the path by which we want to
search.
III Parallel Path: In this path, the search lines are straight,
parallel, and equal lines before the start of the first line, and at each step
you take, the user must press this start button if we have chosen the “manual”
search type. We also always recommend that the distance between one step and
the other be an estimated 30cm. We repeat this process for each line we take,
until we have finished all the marked lines.
(Please read paragraphs 3 and 4 on the following pages for how to calculate
the number of lines and pulses in both the parallel and zigzag paths).
2 Zigzag Path : In this path, follow the zigzag method, as shown in the
drawing on the side, remembering to press the Start button at the beginning
and end of each step you take in this path. We also always advise that the
distance between one step and the other be an estimated 30cm as well.
Direction: the angle of the search area From this option, we can select
the starting point from which the search will start, so that this point is in
one of the corners of the specified search area. If we are going to start the
search from point A, for example, we must specify this direction drawn as
follows ( ) in the “Direction” option from the system settings, and vice versa
for point B.
Lines & Pulses
Lines: The process of calculating the number of trajectory lines in the
search area: Let’s say first that we want to search in an area 2 meters wide
and 2 meters long, we divide the line of latitude that we drew into parallel
and longitudinal lines “based on it” so that the distance between each line
and the other is 30cm, In this case, we will produce “almost” a total of 8
lines based on the latitude that we previously determined. You write the
number of fonts that we calculated, which is 8, in the “Fonts” field of the
system settings in the application.
Pulses: The process of calculating the number of pulses for each line in
the paths: The “number” of pulses is the number of times we will press the
Start button on the wireless handle while searching in the path lines. To
calculate the number of pulses in the search lines .. and as we previously
assumed that the length of the area The search is 2 meters, that is, the
length of the lines that we specified in the previous paragraph will be 2
meters as well. We divide the line of longitude or the previous lines into
equal sections, or we call them pulses, so that the measurement of one section
or the distance between each pulse and the other is 30 cm. In this case, we
will have “Almost” with a total of 8 pulses in each of the lines that we
previously defined. We write the number of pulses that we calculated, which is
8, in the “pulses” field of the system settings in the application.
The white lines in this drawing indicate the eight search lines that we
identified in the previous paragraph, while the red lines drawn on the white
lines express the impulses that we will make in these lines.
Type & Result
Type(search type): by this option we can choose how pulses are recorded
either automatically or manually, When selecting “Manual” option the user have
to press Start button located on the wireless handle of the device at each
step by step in one of the previous paths (as shown in the previous
paragraphs, this is in contrast to the “Automatic” option so that the
application here calculates the number of pulses in each A search line from
the automatically selected paths, meaning there is no need to press the Start
button manually at each step, but the user will have to press Start at the
beginning and end of each line only.
After completing all the previous settings, we press “start scan” button at
the bottom of the screen, skip the video tutorial ans start searching with the
previous settings.
We will notice that with every step we take in the paths, the application will
start drawing 3D details. Complete the search process as we prepared it until
a window appears on the screen statingt hat the search process has been
completed successfully.
We review the result of our search. Then we save our search file in the
application, in order to view it better later.
After entering the 3D drawing file, we can move the drawing formed in the middle of the screen in the direction and perspective we want, as if it were in 3D space.
Settings
Settings: Language from Setting menu we can change the language of the
application, as the app support eight most different widespread languages.
We can also change the language faster by returning to the main menu and
pressing the language icon on the top bar. A list of the eight available
languages will appear
From the connection option in the settings, we can access the option to
connect the device to the application, or to disconnect with the device. We
can also access the Quick connect feature from the top bar of the main menu.
It should also be recommended to open Bluetooth before starting to connect the
device, or to give permission to the application to automatically open
Bluetooth technology. We can turn on bluetooth from the bluetooth icon present
in the top bar.
In order to access information about the Geoground company or the connected
device, we can click on the right pop-up window.
This app is private and exclusive to Geoground. This application only works
with Geoground devices that support 3D ground scanning systems. Download the
application and connect it with your device to start the journey of detecting
the largest targets in a professional and easy way.
3D Drawing
-
Settings and Drawing Reset view for the automatic and main mode.
-
The ground grid or the surface of the search area.
-
The wireframe or clear line vision of the drawing.
-
Search results data.
-
The approximate depth in each search box (grid cell).
-
Soil for the search area,choose … the appropriate type of soil from 15 natural types – cement – clay – sandy – clay- high minerals – low minerals – rocky – fresh water – salty water – snowy – permafrost – charcoal – granitic – saline.
-
Color filter It is used to hide one of the colors of the drawing.
-
Color themes of drawing color gradations.
We can refer to the file of the search we have done at any time we want through the files section of the application.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>