PAMEX EKS-D7P1S Enkore D2 Lever Lock Set User Guide

PAMEX EKS-D7P1S Enkore D2 Lever Lock Set

Product Information

The EKS-D7P1S/EKS-D791S is a lockset that consists of an exterior lockset and an interior lockset. It features a light indicator, NFC sensor pad, key protect cover, mechanical keyway override, battery cover, and interior thumbturn. The lockset is designed to provide secure access control and can be programmed using crypto cards.

• Light Indicator: The lockset has a red/green light indicator that provides visual feedback during various operations.
• NFC Sensor Pad: The lockset is equipped with an NFC sensor pad that allows access by tapping a key card.
• Key Protect Cover: The lockset has a key protect cover that safeguards the cylinder against tampering.
• Mechanical Keyway Override: The lockset features a mechanical keyway override, enabling locking/unlocking using a physical key.
• Battery Cover: The lockset has a battery cover that protects the batteries from damage.
• Interior Thumbturn: The lockset includes an interior thumbturn for convenient locking/unlocking by turning the thumbturn.

Product Usage Instructions

How to Lock/Unlock the Lockset:

1. To lock the lockset:
   • Use a valid Construction Card to lock the lockset.
   • Turn the handle to secure the lock.
2. To unlock the lockset:
   • Use a valid Construction Card to unlock the lockset.
   • Turn the handle to release the lock.

How to Program the Lockset:

1. Tap a Crypto Card against the lock.
2. Use a Construction Card to access the lock after programming.
3. Note : The type of Crypto Card to use depends on the position of the door hinges:
   • If the door hinges are on the left side, use the Left Handed Crypto Card.
   • If the door hinges are on the right side, use the Right Handed Crypto Card.

How to Reset to Factory Settings:

1. Tap a Recovery Card to the lock to reset it.
2. Refer to the “How to Program the Lockset” instructions to re-program the lock after resetting with a Recovery Card.

Light Indicator Notifications:

• To Lock/Unlock/Program with a Crypto Card:
  • Flashes green with one beep sound.
  • Flashes green with a long beep sound.
• Reset to Factory Settings:
  • Flashes green three times with three beep sounds. Then, after a few seconds, the green light and the buzzer will stay on for 2 seconds.
• Key Cover Open
• Battery Low (please replace with four AA alkaline batteries)
• Power On:
  • Flashes red for 30 seconds, then flashes green 5 times with 5 beep sounds. The green indicator and the buzzer will stay on for 2 seconds every time the lock is unlocked/locked with RFID. Alternates between a red flash and green flash twice and ends with a beep sound.
• Failure to Lock:
  • Flashes red 5 times with 5 beep sounds.

FCC Statement:

This device complies with part 15 of the FCC Rules. It operates under the conditions that it does not cause harmful interference and accepts any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

To minimize interference, please follow these recommendations:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

OVERVIEW OF THE LOCKSET

EXTERIOR LOCKSET

INTERIOR LOCKSET

Function

HOW TO LOCK / UNLOCK / PROGRAM THE LOCKSET / RESET TO FACTORY SETTINGS

1. HOW TO LOCK / UNLOCK THE LOCKSET

2. HOW TO PROGRAM THE LOCKSET

3. Tap a Crypto Card against the lock

4. You can now use a Construction Card to access the lock.
   Crypto cards help calibrate the lock. There are two types of Crypto card. One is the Left Handed Crypto Card and the other is the Right Handed Crypto Card. Please follow the instructions below to find out which Handed Crypto Card to use.
   Please face the exterior lockset and stand in the front of the door to see which Crypto Card you need to use. This will depend on which side the door hinges are located
   If the door hinges are on the left, please use the Left Handed Crypto Card.
   If the door hinges are on the right, please use the Right Handed Crypto Card.

5. RESET TO FACTORY SETTINGS

Tap a Recovery Card to the lock
Please refer to HOW TO PROGRAM THE LOCKSET to re-program the lock after resetting the lock with a Recovery card.

LIGHT INDICATOR NOTIFICATION

• To Lock/Unlock
  • Flashes green with one beep sound.
• Program with a Crypto Card
  • Flashes green with a long beep sound
• Reset to Factory Settings
  • Flashes green three times with three beep sound. Then few secon ds later, the green light and the buzzer will last on for 2 sec onds
• Key Cover Open
  • Flashes red for 30 seconds then flashes green 5 times with 5 bee p sound.
• Battery Low (please replace with four AA alkaline batteries)
  • The green indicator and the buzzer will last on for 2 seconds e verytime unlock/lock with RFID.
• Power On
  • Alternates between a red flash and green flash twice and ends wit h a beep sound
• Failure to lock
  • Flashes red 5 times with 5 beep sounds.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation i s subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including in terference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with t he limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen tial installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the in structions, may cause harmful interference to radio communications. However, there is no guarantee that inter ference will not occur in a particular installation. If this eq uipment does cause harmful interference to radio or television reception, which can be determined by turning the eq uipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different fr om that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party res ponsible for compliance could void the user’s authority to oper ate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum di stance 20cm between the radiator & your body

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>