Shenzhen Hatsune Miku E-Commerce Co ltd X12 Portable Wireless Speaker Instructions

Hatsune Miku E-Commerce Co ltd
Wireless Speaker Instructions
Portable Wireless Speaker

Wireless Speaker -X12
Wireless Speaker

Technical Specifications:

Wireless standard: 5.0
Transmission distance: 10 meters
Output power: 40W
Play time: 2~6H
Frequency effect: 80Hz ~ 1OKHz
Speaker : 66mm’*2, 40 20W
Input Power: 5V ****2A
Maximum current consumption: 2A
Battery type: 18650 Li-ion 74V 2600mAh
Audio signal input interface: standard Φ3.5mm headphone jack (stereo)

Features:

1. Wireless connection
2. Memory function
3. Support U disk/ TF card/ AUX play mode
4. Built-in lithium battery
5. Support MP3/WAV/WMA/FLAC/APE music format decoding
6. Use high-fidelity speakers, make the sound more natural and delicate
7. 1+1 serial function
8. Water resistance IPX6

Button instruction:

1. Volumet+Long press: Volume increase; Click: Next song.
2. Volume – Long press: Volume decrease: Click: Previous traqk.
3. Power button: Long press to power on; Click: Cascade.
4. Sound effect switching.
5. Light switching/off.
6. Mode key: Click to switch functions.
7. Pause/Play
8. Type-C charging cable interface. When inserting a Type-C charging cable, it defaults to device charging.
9. AUX jack.
10. USB interface, when inserting a USB drive, defaults to USB playback mode.
11. When the TF card is inserted into the TF card jack, it defaulfs to the TF card playback mode.

Directions for use:

1. Device to connect
   1.1 Turn on the device to default wireless mode.
   1.2 Turn on wireless device, search model x12and connect, play music after connection successfully.

2. Suitable for all kinds of mobile phones equipped with wireless.technology, wireless adapter, wireless players.

3. Voice prompt
   3.1. there is a voice prompt when turn on/off.
   3.2. Low-power voice prompt 3 times, shutdown after 15S.
   3.3. there is voice prompt when the button to the maximum volume, no voice prompt at the minimum volume.

4. Mode switching
   4.1. enter into wireless by default when starting-up, switching sequence is as follows: wireless mode -TF card mode -USB mode – AUX mode.
   4.2. mode: post-insertion priority.

5. LED fight
   Wireless search status: blue light does not flash,
   Wireless pairing Status: Lights change Play state:
   The colored light flashes slowly for about 1.5 seconds/time;
   Power-on state: The blue light does not flash

6. volume
   the default volume of speaker is 50% when starting-up.

7. Charging to use
   The machine built overcharge protection circuit, can be connected to a computer orcharger for a long time, about four hours to fully charge. Every battery playback time will be different due to the use of different size of the volume.

8. No working status, automatic shutdown after 15 minutes.

Troubleshooting:

1. Auto power off: the battery protection is automatically activated when the battery is low, please use it after charging for 5 hours.
2. Can not play music: the music file storage.path cannot be recognized, save file and store in the root directory of the removable device.
3. Connect the computer no sound: computer interface connection error, please select the correct audio output port.
4. No function or function keys wrong: try again after shutcown.
5. If the machine is stuck abnormally, press the power button for 15 seconds to reset.

Product warranty

Username: ————
Contact number: ————
Date of purchase: ————
Product number: ————
Maintenance failure: ————
Note: The product warranty is6 months

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>