VOLLRATH R3877546 Cafeteria Breath Guard Instruction Manual
- June 1, 2024
- VOLLRATH
Table of Contents
VOLLRATH R3877546 Cafeteria Breath Guard
Installation Instructions
These instructions cover the installation of the one piece Cafeteria Breath Guard and the three piece Cafeteria Breath Guard.
One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:
NOTE: Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
- Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
Figure 1 below provides a visual representation of the One Piece Breath Guard Installation process.
Three Piece Breath Guard Installation
- Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
- Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.
- Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
- Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
- Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.
Figure 2 illustrates the Three Piece Breath Guard Installation process with labeled parts for guidance.
Specifications
| Item Number | 2350030-01 |
|---|---|
| Revision | 04/12 |
Company Information
The Vollrath Company, L.L.C. 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
- Main Tel: 800.628.0830
- Service Tel: 800.628.0832
- FAX: 800.752.5620
- Vollrath of Canada, Co.
- Tel: 800.695.8560
- FAX: 800.752.5620
- Website: www.vollrathco.com
FAQ
What should I be cautious about during installation? Take care not to overtighten the cap nuts as this may cause the plastic to crack. How do I secure the uprights and other parts during installation? Use cap nuts (C) to secure the uprights (A) and other parts to the studs (B) or support tube (D), and secure the breath guards with screws (F) and cap nuts (C). Where can I find the Vollrath Company contact information? The contact information for the Vollrath Company is provided in the Company Information section above. Is there a visual guide for the installation process? Yes, visual guides for the installation process are provided in Figures 1 and 2 within the document. Where can I find the revision number of these instructions? The revision number of these instructions is listed in the Specifications section as “Rev 04/12”.
The Vollrath Company, L.L.C.
1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
Main Tel: 800.628.0830
Service Tel: 800.628.0832
FAX: 800.752.5620
Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620
© 2010 The Vollrath Company, L.L.C.