Bestway AirJet Hot Tub Heater Pump Replacement Instructions
- June 1, 2024
- Bestway
Table of Contents
AirJet Hot Tub Heater Pump
Replacement Instructions Hot Tub Installation Safety Reminders
AirJet Hot Tub Heater Pump Replacement
Read your manual thoroughly before installation
Installation Location
Ensure the installation location is level and able to support the combined
weight of the product when filled and all its users. The location must have
adequate drainage to avoid property damage and be within 12 ft. of a grounded,
grounding-type receptacle.
Special Indoor Installation Requirements: Outdoor setup is preferred, but if
an indoor location is chosen, note that humidity is a natural side effect of
hot tub use and could cause damage to property without proper precaution. To
minimize these effects, consult an expert to confirm the installation area is
properly ventilated prior to use.
Electrical Safety
Use of an extension cord or multi-plug adaptor is strictly prohibited. Plug
your 12 ft. hot tub cord directly into a grounded socket to avoid overheating,
which can lead to damage of hot tub equipment and surrounding property.
Your hot tub must be used with a grounded socket corresponding to the
electrical rating of the attachment plug (110-120V AC, 60Hz, Single Phase 12A
at 68 F). It is recommended to use a socket that is also resistant to humidity
and capable of high-power loading. If you’re unsure about the electrical
supply quality, consult a qualified electrician before use.
It’s important to regularly inspect the plug and socket for signs of damage.
If signs of damage are found, do NOT plug back into the socket. 