Shengxiang 288 Colorful Light with Fabric Bluetooth Speaker Instruction Manual

Shengxiang 288 Colorful Light with Fabric Bluetooth Speaker

Product Information

Thank you for choosing the Colorful Light with Fabric Bluetooth Speaker 228. This speaker is designed to provide you with a vibrant audio experience along with customizable lighting effects. Here are some important details about the product:

• Model Number: 228
• Bluetooth Version: V5.3
• Playback Time: 6-7 hours
• Calling Time: 4-5 hours
• Power Display: No support
• Bluetooth Protocol: A2DP/HFP/HSP/AVRCP
• Battery Capacity: 1200mAh
• Charge Time: 2-3 hours
• Working Distance: 10 meters

Product Usage Instructions

1. On/Off Button: Press and hold this button for 3 seconds to turn the device on or off. The device will emit a prompt sound when turned on. If no Bluetooth connection is established or no button operation is performed within 1 minute of turning on the device, it will automatically shut down with a dong sound.
2. Bluetooth Pairing: Search for the broadcast name “288” on your smartphone and add it for pairing. Once successfully paired, there will be a prompt message. The device will automatically connect to Bluetooth when turned on in the future.
3. Answer/End Call: When your smartphone is connected via Bluetooth, you can answer an incoming call by pressing the button on the speaker. Press again to end the call. If you receive a call during music playback, the music will pause. Press the button to answer the call and press again to end it. The call will automatically return to playing music.
4. Play/Pause Function: During music playback, press the button once to pause and press again to resume playing.
5. – Button: In music playback mode, click this button to select the next track. Holding it down will gradually decrease the volume until it reaches a silent state.
6. + Button: In music playback mode, click this button to select the previous track. Holding it down will gradually increase the volume until it reaches the maximum sound level. There will be two prompts of dong dong.
7. LIGHT Button: This button activates the lighting effect when pressed. Each press switches to a different lighting effect among 7 options. Press and hold for 2 seconds to turn off the lights, and click once to turn them back on.
8. Charging: To charge the speaker, use a DC 5.0V charging head with an output of 1A-2A. Connect the USB-C charging cable and plug it into a suitable charging port. The red light will indicate that charging is in progress, and it will go out once charging is complete.

Please note that the speaker should be stored in a dry and ventilated environment, away from oil, water vapor, steam, moisture, and dust. Avoid using organic solvents or liquids to clean the speaker. The communication connection distance between mobile phones and the device is approximately 10 meters in an unobstructed area, but this distance may be shorter if there are partitions or barriers with a shielding effect. Use a standard charger or one that meets the requirements to charge the speaker, and ensure that the speaker has sufficient power for normal use.

Speaker manual 228

Thank you for choosing this colorful light with fabric Bluetooth speaker 228. We will continue to design, develop, and produce products that are suitable for your use.
Please read the manual carefully before using the product and keep it properly.

How to use

1. On/Off button: Press and hold for 3 seconds to turn on/off the device.
   There is a prompt when the device is turned on. If there is no Bluetooth connection after the device is turned on, or no button operation, then after 1 minute, the device will automatically shut down with a “dong -” sound.

2. Bluetooth pairing, the smartphone searches for the broadcast name “288”, and after successfully adding the pairing, there will be a prompt message. As long as the pairing is successful, the device will automatically connect to Bluetooth when opened in the future.

3. Answer/end call: The Bluetooth connection status of the smartphone and device allows you to answer a call by pressing the button. Press again to end the call. If the call is in music playback mode, the music playback will be paused. Click the button to answer the call, and press again to end the call. The call will automatically return to continue playing music.

4. Play/Pause function: During music playback, press the button once to pause playback, and then press again to continue playing.

5. – “button: In music playback mode, click to select the next music to play. Holding it down will gradually reduce the volume to a silent state.

6. + button: In music playback mode, click to select the previous music to play. Holding it down will gradually increase the volume to the maximum sound state, and there will be two prompts of “dong dong”.

7. LIGHT: Turns on the lighting effect upon startup. Every time this button is pressed, it switches to a lighting effect with a total of 7 different lights. Press and hold for 2 seconds to turn off the lights, and click once to turn them back on.

8. Regarding charging: Please use a DC 5.0V charging head output from 1A-2A, connect the USB-C charging cable,and plug it into the local charging port. The red light will light up, and after charging is completed, the red light will go out.

Specifications

Note: Product parameters may vary depending on model, usage, environment, etc

Precautions:

1. The speaker should be stored in a dry and ventilated environment, avoiding contact with oil, water vapor, steam, moisture, and dust to avoid affecting product performance.
2. Avoid using irritating organic solvents or liquids containing these components to clean the speaker.
3. The communication connection distance between mobile phones and devices is 10 meters in an unobstructed and open area. If there is a partition or a barrier with shielding effect, the distance will be shorter.
4. Please choose a standard charger or one that meets the requirements to charge the speaker.
5. To ensure your normal use of the speaker, please ensure that the speaker has sufficient power.
6. If you find that the machine has function problem, please do not remove the speaker, otherwise, it cannot be guaranteed.

Safety Precautions

This product contains a built-in rechargeable battery. To prevent serious damage to the device, it is not advisable to expose the product to strong sunlight or place it near a fire source. Do not place the device in an environment with an ambient temperature above 70 ℃ or below -20 ℃ for a long time.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>