VOLLRATH T3873260A Cafeteria Breath Guard Installation Guide

June 1, 2024
VOLLRATH

VOLLRATH-LOGO

VOLLRATH T3873260A Cafeteria Breath Guard

VOLLRATH-T3873260A-Cafeteria-Breath-Guard-PRODUCT

Specifications

  • Item No.: 2350030-01 Rev 04/12
  • Manufacturer: The Vollrath Company, L.L.C.
  • Address: 1236 North 18th Street Sheboygan, WI 53081-3201 U.S.A.
  • Main Tel: 800.628.0830
  • Service Tel: 800.628.0832
  • Fax: 800.752.5620

Product Usage Instructions

One Piece Breath Guard Installation

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figure 1. Repeat for all four uprights.

Three-Piece Breath Guard Installation

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown in Figures 1 and 2. Repeat for all four uprights.
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.
  5. Install the support bar and stud assembly (H) to the side breath guards (E). Repeat for all mounting locations.
  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

FAQ

Q: What should I do if I accidentally overtighten the cap nuts?
A: If you accidentally overtighten the cap nuts and notice cracking in the plastic, stop immediately and contact customer service for assistance.

Q: Can the breath guard be adjusted after installation?
A: Yes, you can adjust the position of the breath guard components after installation by loosening the cap nuts slightly and repositioning as needed.

Installation Instructions

One Piece Cafeteria Breath Guard
Three Piece Cafeteria Breath Guard

These instructions cover the installation of the one pice Cafeteria Breath Guard and the three-piece Cafeteria Breath Guard.

One Piece Breath Guard Installation
Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figure 1. Repeat for all four uprights. VOLLRATH-T3873260A-Cafeteria-Breath-Guard-1
  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.
  3. Install the one piece breath guard (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all four mounting locations.
  4. Install the side breath protector (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

Three Piece Breath Guard Installation

Some units are shipped with a breath guard not installed. To install the breath guard follow these steps:

NOTE:
Use caution when tightening the cap nuts. Overtightening may cause the plastic to crack.

  1. Install the breath guard uprights (A) to the studs (B) securing with cap nuts (C) as shown. See Figures 1 and 2. Repeat for all four uprights.VOLLRATH-T3873260A-Cafeteria-Breath-Guard-2

  2. Install the breath guard support tube (D) between the uprights (A) securing with cap nuts (C) as shown. Repeat on the other side.

  3. Install the side breath guards (E) securing with screws (F) and cap nuts (C) as shown. Repeat for all mounting locations.

  4. Install the side shield (G) to the support tube (D) securing with cap nuts (C) as shown. Repeat on the other side.

  5. Install the support bar and stud assembly (H) to the side breath guards (E).
    Repeat for all mounting locations.

  6. Install the top breath guard (I) to the support bar and stud assembly (H) securing with cap nuts (C). Repeat for all mounting locations.

www.vollrathco.com

The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 800.628.0830
Service Tel: 800.628.0832
FAX: 800.752.5620

Vollrath of Canada, Co.
Tel: 800.695.8560
FAX: 800.752.5620

© 2010 The Vollrath Company, L.L.C.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

VOLLRATH User Manuals

Related Manuals