X Photoelectric X-56P 3D Magic Diamond Light User Manual

X Photoelectric X-56P 3D Magic Diamond Light

Product Information

Specifications

• Compliance: FCC Part 15
• Device Type: Class B Digital Device
• RF Energy: Generates and uses radio frequency energy
• Antenna: Supplied antenna for operation
• RF Exposure Guidelines: Maintain a minimum 20cm distance between the radiator and your body

Product Usage Instructions

1. FCC Compliance
   This device complies with part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

2. Harmful Interference
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It is designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.

3. Correcting Interference
   If this equipment causes harmful interference to radio or television reception, you can try the following measures:

4. Reorient or relocate the receiving antenna.

5. Increase the separation between the equipment and receiver.

6. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

7. Consult the dealer or an experienced radio/TV technician for help.

8. RF Exposure Guidelines
   To maintain compliance with FCC’s RF Exposure guidelines, it is recommended to install and operate this equipment with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna for optimal performance.

FAQ (Frequently Asked Questions)

• Q: What does FCC compliance mean?
  A: FCC compliance means that the device meets the regulations set by the Federal Communications Commission to ensure it operates within acceptable limits and does not cause harmful interference.

• Q: How can I reduce interference if it occurs?
  A: If interference occurs, you can try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different circuit, or seeking assistance from a dealer or experienced radio/TV technician.

• Q: How should I use the equipment to comply with RF Exposure guidelines?
  A: To comply with FCC’s RF Exposure guidelines, maintain a minimum 20cm distance between the radiator and your body. It is also recommended to use only the supplied antenna for operation.

3D Magic Diamond Light

Thanks for your purchasing, please read this manual carefully before operating the system, It gives you general information for your safety and better operation.

Packing Accessories

Check for the contents in the package refers to the following list;

• 1 x 3D Magic Diamond Light
• 1 x USB cable
• 1 x User Manual

Product Features

• Input power: AC11 0V-240V
• Output power: SV 2A
• Laser Power: 35mW 515nm green, 1 00mW660nm red,  1 00mW450nm blue
• Speaker power:4 Q 3W
• LED power: white 0.2W’23PCS
• Housing material: ABS
• Certification: FCC
• Application: Home light. Party light. Atmosphere light. Bedroom, Night light, Theater, Restaurant, Bar etc.

Bluetooth control mode

1. The Bluetooth function of the 3D diamond light is turned on by default, and when it is turned on, you will hear one Voice prompts “Bluetooth Mode”
2. Turn on the Bluetooth function of your smartphone, tablet or other device with Bluetooth.
3. Select “3D Diamond” from the list to pair, You ‘II hear  a voice prompt, “The Bluetooth.” device is connected successfully”, at which point the Bluetooth device is successfully connected.

Button Instructions

1. Turn on/off
2. Laser: laser mode two-colors , Auto, Red, Blue, Green, Green blue, red blue, red green, red green blue, three-color self-walking, voice control 1, voice control 2, off
3. Speed regulation: motor 3 speed regulation (stop, slow, fast);
4. Control night light: on, off, dim

 Precautions

1. Do not use in direct sunlight or high temperature for a long time Put the product.
2. After 6 hours of continuous work of this product, the power is cut off and cooled for 30 minutes, which willet will increase the service life of the product.
3. This product meets the laser light of safety level 1.
4. Do not decompose or modify this product.
5. This product is suitable for indoor use, please do not bring this product close to combustible or liquid, do not store this product at a light source.
6. The power interface of this product is an international universal Type C port.
7. Please use a 5V power supply that has obtained CCC certification and meets the requirements of the standard Adapter.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>