SONY PDT-FP1 Portable Data Transmitter Instructions
- June 1, 2024
- Sony
Table of Contents
- SONY PDT-FP1 Portable Data Transmitter
- Product Information
- Product Usage Instructions
- Inserting the SIM card
- POWER ON
- Declaration of Conformity
- Supported frequency bands
- INFORMATION
- FCC Statement
- Instructions to prevent reasonably
- Legal information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SONY PDT-FP1 Portable Data Transmitter
Product Information
Specifications:
- Model: PDT-FP1
- SIM: 1
- Power: 2 PWR ON
- Manufacturer Website: Visit here
Product Usage Instructions
Step 1: Inserting the SIM card
Locate the SIM card slot on the device and carefully insert the SIM card as
per the provided instructions in the user manual.
Step 2: Power On
Press and hold the power button for a few seconds until the device powers on.
Follow any on-screen prompts to complete the setup process.
Frequently Asked Questions (FAQ)
-
Q: How do I charge the device?
A: To charge the device, use the provided charging cable and connect it to a power source. Make sure to use a compatible charger to avoid any damage to the device. -
Q: Can I expand the storage capacity?
A: Some devices allow for expandable storage via microSD cards. Refer to the user manual or manufacturer’s website for compatibility and instructions on expanding storage. -
Q: How do I reset the device?
A: To reset the device, locate the reset button (if available) or perform a factory reset through the device settings. Note that a factory reset will erase all data on the device, so ensure to back up important information before proceeding.
Inserting the SIM card
POWER ON
https://rd1.sony.net/help/mobile/pdt-fp1/h_zz/
Declaration of Conformity
Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://compliance.sony.eu
UK Declaration of Conformity
PDT-FP1 (PM-1470-BV)
Hereby, Sony Corporation declares that this equipment is in compliance with
the relevant statutory requirements. The full text of the declaration of
conformity is available at the following internet address:
https://compliance.sony.co.uk
Notice for customers: the following information is only applicable to
equipment sold in the United Kingdom
This product has been manufactured by or on behalf of Sony Corporation
UK Importer: Sony Europe B.V.
Inquiries to the UK Importer or related to product compliance in the UK should
be sent to the manufacturer’s authorized representative, Sony Europe B.V., The
Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.
Supported frequency bands
PDT-FP1
5GNR (Bands n1, n2, n3, n5, n7, n8, n20, n25, n28, n30, n38, n40, n41, n48,
n66, n71, n77, n78, n79, n257, n258, n260, n261), LTE (Bands 1, 2, 3, 4, 5, 7,
8, 11, 12, 13, 17, 18, 19, 20, 21, 25, 26, 28, 29, 30, 32, 34, 38, 39, 40, 41,
42, 46, 48, 66, 71), Bluetooth® (2.4GHz), WLAN (2.4GHz/5GHz/6GHz)
- 5GNR: 26dBm(n77/n78/n79)/
- 23dBm(Others), LTE: 23dBm,
- Bluetooth: <10mW,
- WLAN(2.4GHz): <100mW,
- WLAN(5.15-5.35GHz, 5.47-5.725GHz): <100mW,
- WLAN (5.735-5.835GHz): <25mW,
- WLAN (5.945-6.425GHz): LPI <200mW, VLP <25mW
Supported frequency bands
Some frequency bands might be turned off in certain markets or by certain
operators. You can find your model number under Settings > About device.
Restrictions in the 5 GHz and 6 GHz bands
For this radio equipment, the following restrictions on putting into
service or of requirements for authorization of use apply in BE, BG, CZ, DK,
DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO,
SI, SK, FI, SE, UK, UK(NI), IS, LI, NO and CH: There are restrictions on use
that limit operation in the Wireless LAN 5 GHz and 6 GHz bands to indoor or
limited outdoor use. This device is configured to comply with these
restrictions.
Specific Absorption Rate (SAR) Information for CE Marking
The International Commission on Non-Ionizing Radiation Protection (ICNIRP)
specifies a SAR limit of 2 W/kg averaged over ten (10) grams of body tissue.
For body-worn operation, the device has been tested when positioned a minimum
of 5 mm from the body without any metal parts in the vicinity of the device or
when properly used with an appropriate accessory and worn on the body. For
more information about SAR, find and tap Settings > About device > Legal
information > Important information on your device.
INFORMATION
Information on charging specifications
The power delivered by the charger must be between min 2.5 Watts required
by the radio equipment, and max 30 Watts (USB Type-C® terminal (Data
transfer)) / 27 Watts (USB Type-C terminal (CHARGE)) in order to achieve the
maximum charging speed.
Information on fast charging specifications
- USB PD fast charging
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. For additional information, please read the FCC Statement provided under Settings > About device > Legal information > Important information > Statements on your device.
Specific Absorption Rate (SAR) Information for FCC
In the United States, the SAR limit for portable devices used by the public is
1.6 watts/kilogram (W/kg) averaged over one gram of tissue. For body-worn
operation, the device has been tested when positioned a minimum of 5 mm from
the body without any metal parts in the vicinity of the device or when
properly used with an appropriate accessory and worn on the body. For devices
which include “Wi-Fi hotspot” functionality, SAR measurements for the device
operating in Wi-Fi hotspot mode were taken using a separation distance of 5
mm. Use of third-party accessories may result in different SAR levels than
those reported.
For Customer in the U.S.A.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for
control of or communications with unmanned aircraft systems. For question
regarding your product or for the Sony Service Center nearest you, call
1-800-222-7669 (SONY).
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: PDT-FP1
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
To view the regulatory compliance mark
- Find and tap Settings > About device > Certificates.
A regulatory compliance mark such as an FCC ID is displayed on the screen.
This device does not support telephone calls.
High-temperature warning
This mark is displayed when the surface temperature of the product rises
during use. When the mark is displayed, there is a risk of burns if you
continue using the product while holding it in your hands. In this case, do
not continuously hold your device directly in your hand during use.
Loudness warning
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
Instructions to prevent reasonably
Foreseeable mishandling of the battery
- This product has a built-in lithium-ion battery.
- Do not expose this product, including the battery, to excessive heat, fire, etc., for an extended period of time.
- Do not subject this product, including the battery, to extreme low-temperature conditions that may result in overheating and thermal runaway.
- Disposing of the battery into fire or a hot oven or mechanically crushing or cutting the battery can result in an explosion.
- Leaving the battery in an extremely high-temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- Subjecting the battery to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- The battery must be charged before use.
- Always use the Sony-branded charger and USB cable.
- Refer to the manufacturer’s instructions or equipment manual for proper charging instructions.
- After extended periods of storage, it may be necessary to charge and discharge the battery several times to obtain maximum performance.
To turn the internet connection or the Bluetooth function on or off
Swipe down twice from the top of the screen to open the Quick settings panel.
- To turn the mobile data connection on or off, find and tap [Internet], and then tap the mobile data switch.
- To turn the Wi-Fi® connection on or off, find and tap [Internet], and then tap the [Wi-Fi] switch.
- To turn the Bluetooth function on or off, find and tap [Bluetooth].
To view the specification information
Scan the 2D code in this Startup guide to open the Help Guide in your
language, and then navigate the links.
Legal information
This Startup guide is published by Sony Corporation or its local affiliated company, without any warranty. Improvements and changes to this Startup guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Corporation at any time and without notice. Such changes will, however, be incorporated into new editions of this Startup guide. All illustrations are for illustration only and may not accurately depict the actual device.
Trademarks
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
All product and company names mentioned herein are the trademarks or
registered trademarks of their respective owners. Any rights not expressly
granted herein are reserved. Visit https://www.sony.net/Products/smartphones
/trademarks-and-copyright.html for more information.
SAR and usage guidelines
For information about SAR (Specific Absorption Rate) and safety guidelines,
please read the Important information provided under Settings > About device >
Legal information on your device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>