E-Box II Rear Cover Instruction Manual
- June 1, 2024
- e-Box
Table of Contents
E-Box II Rear Cover
Specifications
- Item Number: 481A92
- Lockable cover for prevention of (un)intentional misuse
- Mounting materials included: A, B, C, D
Mounting the Rear Cover
- Take 2 x M6 nut [C] and 2 x M6 screw [B] to secure the bottom part of the rear cover to the VESA box.
- Use the included hex key to tighten the fasteners in place.
Locking the Cover
- Insert one of the universal keys [D] into the lock.
- Turn the key to lock the rear cover.
- Remove the universal key and store it in a safe place.
Contact Information
Manufacturer: Regout Balance Systems B.V. (Netherlands) / Thomas Regout Inc.
(USA)
Address: Industrieweg 40, 6219 NR Maastricht, The Netherlands / 145 Bluffs
Court, Canton, GA 30114, USA
FAQ
Q: Is the lockable cover an anti-theft device?
A: No, the lockable cover is intended for prevention of (un)intentional
misuse and is not an anti-theft device.
Installation manual
Rear Cover e·Box II
General Warnings
The lockable cover is intended for prevention of (un)intentional misuse, it is not an anti-theft device.
Tools
Mounting materials [E]
Content of the box
Rear Cover e·Box II
-
Take the bottom part of the rear cover [G] and align the two vertical hooks with the two lowest rectangular slots in the VESA box of the e·Box®. Push down to lock the bottom part of the rear cover inside the two rectangular slots.
-
Take 2 x M6 nut [C] and 2 x M6 screw [B] to secure the bottom part of the rear cover to the VESA box. Use the included hex key to mount the fasteners in place.
-
Take the top part of the rear cover [F] and align the two vertical hooks with the two highest rectangular slots in the VESA box of the e·Box®. Push down to lock the bottom part of the rear cover inside the two rectangular slots.
-
Insert one of the universal keys [D]. Lock the rear cover and remove the universal keys. Store the keys in a safe place.
Regout Balance Systems B.V. Industrieweg 40 6219 NR Maastricht
The Netherlands