SYSIOT SR-RU1XG09B03 UHF Rfid Integrated Reader Owner’s Manual
- June 15, 2024
- SYSIOT
Table of Contents
UHF RFID INTEGRATED READER
Owner’s Manual
Model: SR-RU1XG09B03(M290290) Series
Application：
It can be widely used in logistics tracking, commodity inventory, cargo sorting, vehicle management, personnel management, asset management, medical systems, cold chain management, temperature monitoring, power monitoring, anti-counterfeiting systems and production process control and many other applications.
Features
- Full series of products developed with independent intellectual property rights.
- Full series of modules based on UHF chip development, with the ability to provide personalized product support.
- The whole series of products are modularized to meet the combination of product functions required by the project, while reducing product cost and production efficiency.
- The whole series of products are supported by the same SDK regardless of product solution and product form, simplifying the development of multi-product applications for customer projects.
- Modules and core control boards have rock-solid stability based on nearly 10 years of R&D and production iterations.
- UHF reading TID/EPC various operation combinations, provide data format personalization.
- Desktop card issuer supports keyboard mode, seamless switching in the industrial field.
- Most products support network communication, simplifying wiring connection.
- With European CE / U.S. FCC / Korea KC / Canada ID and other multi-regional product certification.
- Provide multi-OS, such as Windows, Android, Linux, server, Raspberry Pi, cloud.
- Provide multi-language, such as C++, C#, PYTHON, JAVA etc.
- Provide multi-protocol, such as SysIoT standard protocol, TCP, HTTP, UDP, Wiegand (26/27/32/34),
- Provide OS, language, protocol custom development and OEM&ODM services.
Reader Specifications
| Parameter | Model |
|---|
SR-RU16G09B03
RF| Antenna Frequency| 902 ∼ 928MHz
RF Frequency| 902 ∼ 928MHz (Can be customized)
Protocol| ISO 18000-6C/6B
RSSI| Support
Reading distance| ≥20m
Reading speed| ≥500/S
Reader| Interface| Standard: USB, RS232, RS485/Weigand, RJ45(TCP/IP, UDP
Baud rate| 38400/59600/115200bps
Read value| TID+EPC/USER
Mode| Command, polling or trigger
Operating Voltage| DC 12.0V (+9-24V)
Operating Current| ≤800mA / DC12V
Standby Current| ≤200mA / DC12V
Operating Temperature| -20∼55°C
Storage Temperature| -40∼85°C
Operating Humidity| <95%RH (+25°C)
Performance| High performance
Support| SDK| Support
IAP firmware Update| Support
Custom Development| Support
Antenna Specification
| Electrical Specifications | Mechanical Specifications |
|---|---|
| Gain | 9.52dBi |
| Polarization | Circular |
| Beam width (H/V) | Hor:60±2°/ Ver:60±2° |
| VSWR | ≤1.5 |
| Impedance | 500 |
| F/B Ratio | .≥25 |
| Lightning Protection | DC Ground |
| Storage Temperature | |
| Holding rod diameter |
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
www.sysiotrfid.com
sales@sysiotrfid.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>