Bruno S hnle 17-63073 Movements Caliber User Manual
- June 1, 2024
- BRUNO S HNLE
Table of Contents
Bruno S hnle 17-63073 Movements Caliber
Product Information
Specifications
- Movements: RONDA powertech, RONDA normtech
- Calibers: Cal. 585, Cal. 505, Cal. 515, Cal. 6003.D, Cal. 6004.D, Cal. 6003. B, Cal. 6004. B, Cal. 774, Cal. 775, Cal. 704, Cal. 705, Cal. 784, Cal. 785, Cal. 714, Cal. 715, Cal.
- 715Li, Cal. 1005, Cal. 1006, Cal. 1009, Cal. 1015, Cal. 1016, Cal.
- 1019, Cal. 7002. B, Cal. 7003. B, Cal. 7004. B
- Battery Types: Vary depending on the caliber (e.g., 362 / SR721SW, 364 / SR621SW, 371 / SR920SW, 373 / SR916SW, 341 / SR714SW, 381 / SR1120SW, CR 2016)
- Precision: +20 / -10 seconds per month
Product Usage Instructions
Setting the Date
- Locate the position setting on your watch.
- If necessary, pull out the crown to position II for quick-change correction of the date.
- Adjust the date by turning the crown in the appropriate direction.
- For calibers that require manual date adjustment between 10 pm and midnight, set the date to the following day.
- Push the crown back in after setting the date.
Replacing the Battery
- Determine the specific caliber of your watch to identify the correct battery type.
- Open the watch case back using appropriate tools.
- Remove the old battery carefully and dispose of it properly.
- Insert a new battery of the correct type into the battery compartment.
- Close the watch case back securely to ensure water resistance.
Frequently Asked Questions (FAQ)
Q: Where can I find information on warranty claims and repairs?
A: For warranty claims and repair inquiries, please contact your retailer or the watch manufacturer as indicated in your sales or guarantee documentation.
Q: What should I do if my watch is running outside the specified precision range?
A: If your watch is consistently running outside the specified precision range of +20 / -10 seconds per month, we recommend consulting a professional watchmaker for adjustments and servicing.
MODELS
RONDA powertech
- 585
- 505
- 515
RONDA slimtech
- 1005
- 1006
- 1009
- 1015
- 1016
- 1019
RONDA normtech
- 774
- 775
- 704
- 705
- 784
- 785
- 714
- 715
- 715Li
- 6003.D
- 6004.D
RONDA xtratech
- 6003.B
- 6004.B
- 7002.B
- 7003.B
- 7004.B
- You have decided to buy a watch, which was assembled by a watchmaker using a Ronda movement. Please note that no watches are produced or distributed under the Ronda brand.
- In case of repairs, guarantee claims, and questions concerning the functioning of a watch, purchasers and consumers should contact their retailer or the watch manufacturer, for which the relevant information can be found in the sales or guarantee documentation provided with the watch.
Usage Instructions
| Cal. 585 | Cal. 6003.D |
|---|---|
| Cal. 505 | Cal. 6004.D |
| Cal. 515 | Cal. 6003. B |
| Cal. 6004.B |
- Pos. I Position of rest (watch running)
- Pos. II Quick-change correction for date
- The date can also be corrected during the day-changing phase between 10 pm and midnight.
- The date of the following day has to be set because no automatic date change takes place at midnight.
- Pull the crown out to position II (watch still running).
- Turn the crown clockwise until the required date appears.
Cal. 6003.D & 6004.D:
- Turn the crown until the required date appears.
- Push the crown back into position I.
Pos. III Setting the time
- Pull the crown out to position III (watch stopped).
- Turn the crown, until the current time is displayed (remember the 24-hour cycle).
- Push the crown back into position I.
| Cal. 774 | Cal. 715Li |
|---|---|
| Cal. 775 | |
| Cal. 704 | Cal. 1005 |
| Cal. 705 | Cal. 1006 |
| Cal. 784 | Cal. 1009 |
| Cal. 785 | Cal. 1015 |
| Cal. 714 | Cal. 1016 |
| Cal. 715 | Cal. 1019 |
- Pos. I Position of rest (watch running)
Pos. II Quick-change correction for date
- Blocking time for the quick-change day correction is from approx. 9.30 pm and midnight.
- Pull the crown out to position II (watch still running).
- Turn the crown until the current date appears.
- Push the crown back into position I.
Pos. III Setting the time
- Pull the crown out to position III (watch stopped).
- Turn the crown, until the current time is displayed (remember the 24-hour cycle).
- Push the crown back into position I.
- Cal. 7002. B
- Cal. 7003. B
- Cal. 7004. B
- Pos. I Position of rest (watch running)
Pos. II Quick-change correction for date
- The date can also be changed during the day-changing phase between approx. 8.00 pm and midnight.
- The date of the following day has to be set because no automatic date change takes place at midnight.
- Pull the crown out to position II (watch still running).
- Turn the crown until the current date appears.
- Push the crown back into position I.
Pos. III Setting the time
- Pull the crown out to position III (watch stopped).
- Turn the crown, until the current time is displayed (remember the 24-hour cycle).
- Push the crown back into position I.
Contacts
- Cal. 585 / 785: Battery type: 362 / SR721SW
- Cal. 774 / 775 / 784: Battery type: 364 / SR621SW
- Cal. 505 / 515 / 704 / 705 / 714 / 715: Battery type: 371 / SR920SW
- Cal. 6003.D / 6004.D / 6003.B / 6004.B: Battery type: 373 / SR916SW
- Cal. 1005 / 1006 / 1009 / 1015 / 1016 / 1019: Battery type: 341 / SR714SW
- Cal. 7002. B / 7003.B / 7004.B: Battery type: 381 / SR1120SW
- Cal. 715Li: Battery type: CR 2016
- Precision: +20 / -10 seconds per month
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>