O2Vent Optima R130-03 Replacing Connector Bands Instruction Manual
- June 1, 2024
- O2Vent Optima
Table of Contents
Replacing Connector Bands – Instructions
The connector bands (bands) are essential for keeping your O2Vent Optima
device assembled and to maintain the lower jaw position.
The bands are available in nine lengths (13mm-21mm) and two strengths: ‘soft’
(light blue) and ‘firm’ (dark blue).
When should I replace the bands?
- It is recommended to change both bands monthly as they may lose elasticity.
How to identify that the bands need changing
- If the length of the current band is longer than a new band
- If the band’s holes have stretched from circular to oval shape
Replacing connector bands on your O2Vent Optima
Step 1 – Separate the upper and lower device trays, as shown.
Step 2 – To remove, peel the band away from the wide end of the lug.
Repeat on the second side.
Step 3 – Add the new band with the size/number facing out, by hooking the
band opening over the narrow end of the lug and pulling it over the wide end.
To remove, peel the band away from the wide end of the lug.
Step 3 continued – Repeat this action with the other end of the band to
connect the upper and lower trays.
Step 4 – Repeat step 3 with the second band.
To add band, hook over narrow end of the lug and pull over the wide end.
RX ONLY
CONNECTOR BANDS CAN ONLY BE USED IN CONJUNCTION WITH O2VENT OPTIMA DEVICES
MANUFACTURER AND AUSTRALIAN SPONSOR:
Open Airway Dental Solutions
Australia Pty Ltd
5 Moorak Street, Taringa QLD 4068
Australia
www.openairway.au
info@openairway.com
Ph: +61-1300-533-159
MANUFACTURED FOR:
Open Airway Dental Solutions Ltd, Canada
www.openairway.ca
info@openairway.ca
Ph: +1-866-835-977-8267
Consult instructions for use.
US Federal Law restricts this device to sale by or on the order of a
healthcare professional.
R130-03
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>