Zhuoaite ZAT-G850A Smart Gamepad Instruction Manual
- June 1, 2024
- Zhuoaite
Table of Contents
Zhuoaite ZAT-G850A Smart Gamepad
Specifications
- Compliance: Part 15 of FCC Rules
- Radiation Exposure Limits: FCC approved for uncontrolled environment
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Installation
- Place the device on a stable surface.
- Ensure there is a minimum distance of 0cm between the radiator of the device and your body.
- Connect the device to a power source as per the manufacturer’s instructions.
Operation
- Turn on the device using the power button.
- Follow the specific instructions for the intended use of the device.
- Avoid any modifications to the device that are not approved by the manufacturer.
Maintenance
- Regularly clean the device using a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or moisture.
- Keep the device away from direct sunlight when not in use.
Product introduction
This is a smart gaming console with a Classic appearance design. It uses 2.4
GHz wireless transmission technology. It is the best game-pad controller for
Android smart phone/ Tablet/
TV Box SmartTV.
- Exclusive game Store.
- Fit for Android smartphone/ TabletTV Box/ Smart TV.
- Use 2.4 GHz RF wireless transmission technology. distance ≥ 8M.
- Support Android standard menu key including MODE.
- Use 2 x AA batteries (Not included).
- Service life of buttons: 500000 times.
- Service life of rocker. 500000 times.
- Surface finishes: anti-sweat and oil.
- Low power consumption.
- 1x Wireless Gamepad
- 1x Nano Receiver.
- Git Box Packed Safely in blister
Fast start
- The receiver received an intelligent Android TV or TV box with a USB interface;
- The gamepad is equipped with batteries, open the power switch to the “ON” position, the handles, and the receiving head automatic connection, the connection is successful after the red LED is normally ON, without success, please press the MODE button twice quickly and the receiver forced the attachment.
- Product Overview
Game pad operation in detail
Power On/Off
- Open the power switch to “ON” positing, the handle will be automatically connected to the receiver, indicating a red LED normally ON after the connection is successful, if is not successful, please switch the gamepad power or insert the receiver again.
- the power switch is in the “off position place, the gamepad is completely turned off, and power consumption is 0mA
Gamepad according to the prompt after the connection is successful, the game please keep proper distance from the television;.
Gamepad sleep Model
- (Boot attachment) when there is no connect receiver, after 10 seconds into sleep mode;
- if there is no operation of the shaft and buttons, 5 minutes after go into sleep mode;
- When into Sleep mode need to press the HOME key to wake up after a red LED light, can begin to play games,
The gamepad code
- When the gamepad can’t operate or to increase a new gamepad, we need the gamepad with the receiver in the code;
The receiver is powered on for 15 seconds after treatment of the code state;
- a) The receiver to the Smart TV or TV box USB port, turn on the TV or TVbox power,
- b) The gamepad is equipped with a battery. the power switch to the “ON” position (to code the distance of not more than 2 meters), express press HOME button,, LED flashing rapidly, marks the state of the code;
- c) When the red LED is normally on state, the code is successful, if the horse does not succeed, please turn off the controller power supply wait 3 seconds, and then open the power supply or the receiver.
- d) If you need two gamepads into the game, with the same as before way.
- e) The normal default mode of Android, if it is for computer operation requires need by 5 seconds then opens for PC mode;
Attention
- When the gamepad unexpectedly disconnected, it has voltage protection and other conditions, can’t be connected making the gamepad, and connection without the function and other crash loading state, then needs to turn off the power switch 3 seconds after reopening;
- if you have any other questions, please contact the vendor!
- Don’t take this product in an extremely hot and humid place, put it in a dry place;
- Children should be used under the supervision of adults!
- Don’t use alcohol to wipe any part of the product, please use a soft cloth and a small amount of water to clean the product!
- Can be compatible with PCI PS3
FCC
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, maycause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
FAQ
Frequently Asked Questions
Why does the gamepad switch LED not lash, also can not connect to the device.
A: Please confirm whether the battery is installed or whether the battery is properly installed.
Why is the LED flashing used in the process?
A: If low battery consumption need to replace the battery
Why the red LED is not bright in the process of use?
A: Maybe is broken need to reconnect to the code.
Why sometimes appear LED flashing or button delay in the use of the process?
A: Maybe they are too far away from the TV and the receiver is too far Can be used to extend the USB line for the receiver
Why the gamepad can not be used in the computer game?
A: Please select the OPTION in the game handle device operations, and set a good button mapping relationship, if the game OPTION is not found in the game equipment, the game only supports the keyboard and mouse it does not support the gamepad;
Q: Can I modify the device for better performance?
A: No, any modifications not explicitly approved by the manufacturer could void your warranty.
Q: How far should the device be from my body during operation?
A: The device should be operated with a minimum distance of 0cm between the radiator and your body to comply with FCC regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>