LORENTZ S1 200 HR14 Dry Running Protection Probe Installation Guide
- June 1, 2024
- LORENTZ
Table of Contents
LORENTZ S1 200 HR14 Dry Running Protection Probe
OVERVIEW
USING INSTRUCTION
IMPORTANT: You must configure your controller before using your
accessories. Use the S-Connect app, see option A below. If you do not use the
app then manually configure with option B
- Not applicable after app use.
- detection within 10 seconds
Specifications
- Dry Run Protection: 15 meters / 50 feet
- Item Number: 19-001560
Product Information
The LORENTZ S-Connect device features a Dry Run Protection functionality
with a range of 15 meters (50 feet). This product is designed to prevent
damage to the system in case of water shortage or dry running conditions.
Product Usage Instructions
Settings:
Access the settings menu on the LORENTZ S-Connect device.
Advanced Settings:
For more detailed configurations, navigate to the advanced settings
section.
Dry Run Protection:
Locate the Dry Run Protection feature within the settings menu. Here you
can adjust the parameters related to dry run protection.
Apply Changes:
After configuring the Dry Run Protection settings, remember to apply the
changes to save them.
FAQ
Q: What is the purpose of Dry Run Protection?
A: The Dry Run Protection feature in LORENTZ S-Connect helps prevent
damage to the system by detecting and responding to dry running conditions
where there is a lack of water flow.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>