DYWOZDP H-HOBBY-M5 Heat Press Multifunctional Transfer Machine User Manual

DYWOZDP H-HOBBY-M5 Heat Press Multifunctional Transfer Machine

Features

• MUG

• GAP

• MISH

Introduction

1. Seat

2. Sucker feet

3. Auxiliary feet

4. Lowerplate support

5. Lock nut

6. Aluminum alloy frame

7. Power socket

8. Pressure adjusting nut

9. Aviation connector

10. Pressure handle

11. Display

12. Upper heating plate

13. Lower plate pad

14. Lowerplate
    

15. LOGO

16. Temperature display

17. Knob switch

18. Start button

19. Time display

20. Timeunit

21. Centigrade

22. Fahrenheit
    

Temperature Unit Conversion

1. In shutdown state.
2. Press and hold the start button for 6s.
3. Turn the switch to select the required temperature unit.
4. Short press the start button to start the machine.

Temperature setting

1. Turn the display half a turn to the right.
2. Enter the temperature setting mode after a beep sound
3. Turn the switch to the right to increase the temperature (+)
4. Turn the switch to the left to reduce the temperature (-)

Time setting

1. Turn the display half a turn to the left
2. Enter the countdown setting mode after a beep sound
3. Turn the switch to the right to increase the time (+)
4. Turn the switch to the left to reduce the time (-).

Getting Started

1. Connect the power cord
   Connect the aviation connector of the heating plate, then connect the power cord to the power port on the side of the machine and insert the other end into the AC socket.

2. Start up
   After power on, short press the power button to start the machine. After startup, the machine will automatically heat up.
   

3. Shut down
   Press and hold the power button for 3s to shut down .

4. Auto shut down
   The machine will automatically shut down if there is no operation.

Clothes Printing Process

Placing sequence of lower plate pad

1. Top : White high temperature blanket
2. Middle : Blue sponge
3. Bottom : Wooden lower plate.
   

Transfer material : Heat transfer paper Turn the switch to the right to set the temperatu re to 2ooo c .
Turn the switch to the left to set the time to 60s.

Transfer material : PET film Turn the switch to the right to set the temperature to 185°c .
Turn the switch to the left to set the time to 25s.

1. T-shirt to be printed.

2. Turn to the right to place the T-shirt.

3. Adjust the press pressure

4. Press down the handle with force

110Z mug Making Printing Process

Transfer material : 11 oz mug Turn the switch to the right to change the temperature to 185°c
Turn the switch to the left to change the time to 210 s.

1. Loosen the upper and lower screws .

2. Take out the upper and lower heating plates.
   

3. Loosen the nut and lower the support.

4. Install the mug holder.

5. Connect the aviation.

6. Press down the handle
   

Cap Making Printing Process

Transfer material : Cap
Transfer paper : PET film
Turn the switch to the right to change the temperature to 2oo°c
Turn the switch to the left to change the time to 40s.

1. Loosen the upper and lower screws.

2. Take out the upper and lower heating plates.
   

3. Loosen the nut and lower the support.

4. Take out the cap heat press component.

5. Fix the cap heat press
   

Dish Making Printing Process

Transfer material: 8inch plate
Transfer paper: Heat transfer ink
Turn the switch to the right to change the temperature to 2oooc
Turn the switch to the left to change the time to 900s.

1. 8 and 1 O-inch plates.

2. Take out the dish pad.

3. Place the pattern as shown in the above figure.
   

4. Put the dish into the machine.

5. Adjust the pressure and press down the handle with force.

Electrical Diagram

1. Main control circuit board
2. Connecting the flat cable
3. Power board
4. NTC temperature sensor
5. Magnetic switch
6. Buzzer
7. Heating coil
8. Thermal Fuse
   

Wiring diagram of circuit board

1. Display panel
2.  Magnetic switch
3. NTC temperature sensor
4. Spare plug
5. Output COM
6. Input L
7. Input N
8. Output HEAT
   

Accessories List

1. Main machine

2. Pressure handle

3. Lower plate component

4. High temperature sponge

5. White heat-resistant pad

6. Heating plate

7. Cap heat press component

8. Plastic holder for mug pad installation (Upper/Lower)

9. 9o z mug pad

10. 11oz mug pad

11. Aluminum bottle pad

12. 12oz mug pad

13. Dish pad component (8inch/10inch)

14. Accessory screw

15. Main machine screw
    

16. Cable

17. User manual

plate component
High temperature sponge| High temperature sponge| High temperature sponge| High temperature sponge
White heat-resistant pad| White heat-resistant pad| White heat-resistant pad| White heat-resistant pad
Heating plate| Heating plate| Healing plate| Heating plate
Screw ( 5PCS )| Cap heat press component| Cap heat press component| Cap heat press component
Open end wrench| plastic holder for mug pad
installation (Upper/lower)| plastic holder for mug pad
installation (Upper/lower)| plastic holder for mug pad
installation (Upper/lower)
Power cord| 11oz mug pad| 9ozmug pad| 9oz mug pad
User manual| Dish pad component| 11oz mug pad| 11oz mug pad
| Screw ( 11PCS)| Dish pad component
8inch/10inch| Aluminum bottle pad
| Open end wrench| Screw ( 11PCS)| 12oz mug pad
| Power cord| Open end wrench| Dish pad component
8inch/10inch
| User manual| Power cord| Screw ( 11PCS )
| | User manual| Open end wrench
| | | Power cord
| | | User manual

Assembly Process

1. Install the handle

2. Tighten the nuts

3. Open the auxiliary feet and lift the support up

Transfer Parameter (for reterence)

T-shirt (sublimation)| T-shirt (Pu flex film)| Pillow| Cap| Rock photo| Crystal
---|---|---|---|---|---
| | | | |
2oo°C (390F) 60S| 1 85°C (365F) 25S| 2oo°C (390f) 60S| 2oo°C (390f) 40S| 1 9o°C (380F) 400S| 1 9o°C (38o°F) 720S
Mug| Magic mug| Plate| Sport bottle| Aluminum sheet| Glass frame
| | | | |
1 85°C (365F) 210S| 185t (365F) 210S| 2oo°C (39oF) 900S| 1 85°C (365F) 90S| 1 7o°C (338°F) 100S| 1 8o°C (36o°F) 3ooS

Transfer Parameter(for reference)

1. The welding part of aviation connector may fall off.
2. The heating plate may be burnt out, please replace it with a new one.
3. The motherboard may be burnt out and has to be replaced. Please use the mug pad for a test before replacement.

Mug pad does not heat up| Replace with new part. The service life of each padis approx. 500PCS.
Cappad does not heat up| Replace with new part. The service life of each padis approx. 500PCS.
Smell after heating up| Smell will be produced during the heating and it will be decreased after a period of operation.
Displayed temperature is| There will be a temperature error of about
inconsistent with actual temperature| 1o·c during the heating.
Toolightof transferred pattern| Please increase the transfer time and temperature accordingly.
Too dark of transferred pattern| Please reduce the transfer time and temperature accordingly.

Warranty

Guarantee

The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China.
The services are as follows:
Within 12 months this product has the performance failure listed in the product Performance Failure Table”.It is confirmed by manufacturer and can be used for maintenance service free of charge. If out of validity, damage caused by force maieure, or human causes,the machine is not covered by the warranty, repair in charae.

Safety Instruction

Before operating this unit,please read these instructions completely and save them.

Notice:

1. Keep unplug when moving the machine.
2. Keep unplug when installing accessories.
3. Place on a flat and stable platform and operate under ventilated conditions.
4. Wear special protective equipment when operating the machine

Warning

lmproperuse may result in electric shock,fire,personal injury and other damage.

1. Do not use this machine in a hazardous location.
2. Do not use when the machine is not working properly.
3. Do not allow children or adults who do not understand this manual to operate this machine.
4. Do not disassemble and repair this machine.
5. Do not use an unsuitable AC outlet.
6. Do not touch the heating plate when the machine heating

Basic Parameters

• Product name : Multifunctional heat transfer machine
• Model : F910
• Heating method : Heating coil
• Rated voltage/frequency : 120V~60Hz 800W
• Rated voltage/frequency : 220-240V~50Hz 850W
• Mug pad : 280W
• Cap pad : 150W
• Heating plate size : 290mmx380mm
• Temperature range : 4o°C-2o5°C(1 o4°F4o| °F)
• Time range : 1 -999s
• Outer box size : L430xW415xH350
• Outer box volume : 0.063 cube

Customer Support

SKU: H-HOBBY/M5
WhatsApp : 060 600 6000
Website : am.co.za
Email : services@am.co.za

References

• AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials 2024 - AM.CO.ZA® Achievement Matters, CNC Machinery, Spare-Parts, Consumables & Materials

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>