SHENZHEN FUTIAN DISTRICT SHENG DA TONG COMMUNICATION Y29 Earclip Wireless Headphones User Manual
- June 1, 2024
- SHENZHEN FUTIAN DISTRICT SHENG DA TONG COMMUNICATION
Table of Contents
User manual
FCC ID:2BFTK-Y29
Y29 Earclip Wireless Headphones
True wireless stereo(TWS),real no wires design,individual left and right channel HIFI sound, both the left and right earbud are wireless enabled, could be used separately,or used as one pair,
wireless version: | Dual mode wireless, ultra-low power consumption |
---|---|
wireless Mode: | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6 |
wireless Frequency: | 2.4GHZ |
wireless Range: | 10 m |
Battery capacity: | Earbud: 30mah rechargeable Li-ion battery Charging dock: |
250mah(optional)
Talk/Play time:| Headphone playback time: 3-4 hours Headphone talk time
approx: 3-4 hours
Standby time:| Both ears can stand for 80 hours
Headphone use steps and special instructions
- Open the upper cover of the charging case and remove the headphones. The headphones will automatically turn on and pair. (Important note: The red and blue lights on both earphones flash alternately. When the red and blue lights flash on one side and do not flash on the other, the pairing is successful before searching for phone pairing.)
- Pairing with other devices: Open the wireless settings of your phone or other device, search for the wireless name: Y29, click Connect Wireless.
- The headset is placed in the charging box to enter the charging mode, and the headset automatically shuts down.
- TWS wireless headset left and right headphones can be connected separately and separately, other wireless devices use
- If the TWS wireless headset is not connected to the wireless device for 5 minutes, it will automatically shut down.
Headphone touch function description
- Double click on the volume increase in the left ear, and triple click on the next song in the left ear; Double click on the volume in the right ear to decrease, and triple click on the previous song in the right ear. Four clicks to enter sleep mode, long press and hold Siri for 3 seconds.
- Put the earphones back into the charging compartment and automatically turn off and charge them. Remove the earphones from the charging compartment and automatically turn them on and connect them back to the phone
- The earphones are dual channel calls with sound in both the left and right ears;
- Headphone music playback time is about 3-4 hours, talk time is about 3-4 hours, and standby time is about 80 hours;
- The battery capacity of the charging stand is 250MAH, and the earphone battery capacity is 30mAh;
- The charging time is about 1 hour;
- The charging voltage of the charging box is 5V;
- The charging box has a time of 1 hour, a capacity of 250mAh, a flashing red charging light, and is always on when fully charged;
- The charging box can charge the earphones approximately 6 times;
- When charging the headphones, the red light remains on and the fully charged light turns off.
Warnings
- Please do not overuse this earphonekeep away from wet and heat.or putit under heavy pressure,
- Keep away from WIFI,router or other high frequency transmittingequipment to prevent interrruption of signal receiving.
- Please use this earphone under its working range(10m), and theeffect would be better if there is no obstacle between the connecteddevices.
- Use this wireless earphone to connect any device with wirelessfunction
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following twoconditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment. The device has been
evaluated to meet general RF exposure requirement. This equipment complies
with FCC’s RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna(s) must not be co-located or
conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>