Speed and Strength SS2400 Tough Nails Motorcycle Helmet Instruction Manual

Speed and Strength SS2400 Tough Nails Motorcycle Helmet

Specifications:

• Product Name: SS2400 Helmet
• Model: SS 2400
• Features: Chin Bar, Visor

Product Usage Instructions

Removing the Chin Bar:

1. Locate the release button on the side of the helmet.
2. Press the release button and pull the chin bar free on one side.
3. Repeat the process on the other side to completely remove the chin bar.

Removing the Visor:

1. Pull the visor down slightly below the top of the helmet.
2. Gently pull each side of the visor free from the locking mechanism.

Reinstalling the Chin Bar:

1. Line up the anchors of the chin bar with the slots in the helmet.
2. Press the chin bar into place until it securely locks into position.

FAQ:

1. Q: How do I clean the helmet?
   A: Use a mild soap and water solution to clean the helmet shell and inner padding. Avoid abrasive cleaners that may damage the surface.

2. Q: Can I replace the visor on my SS2400 Helmet?
   A: Yes, replacement visors are available for purchase. Follow the instructions provided with the replacement visor for installation.

SS 2400 SHIELD REMOVAL

STEP 1.
To Remove the Chin Bar from the SS2400 Helmet, PRESS THE RELEASE BUTTON LOCATED ON THE SIDE OF THE HELMET, PULL THE CHIN BAR FREE. Repeat on the other side to completely remove the chin bar.

STEP 2.
PULL THE VISOR DOWN JUST SLIGHTLY BELOW THE TOP OF THE HELMET, then GENTLY PULL EACH SIDE OF THE visor free from the locking mechanism.

STEP 3.
TO reinstall the chin bar, simply line up the anchors to the slots in the helmet, and press into place.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>