Milab BDM-01 Condenser Microphone User Guide

June 1, 2024
Milab

Milab BDM-01 Condenser Microphone

Milab-BDM-01-Condenser-Microphone-PRODUCT

Specifications

  • Brand: Milab
  • Model: BDM-01
  • Type: Condenser Microphone
  • Powering: Phantom power at 48V (P48)
  • Connection: XLR

Product Usage Instructions

Package Includes
The Milab BDM-01 Condenser Microphone is designed for bass drum applications in both studio and live settings. It features a high-end condenser capsule for excellent attack and frequency response tailored for bass drums.

Connection
To connect the BDM-01, use a standard XLR microphone cable to any mic input, mixer/amplifier, or mic preamp that supports phantom power at 48V. Ensure correct pinout: Pin 1 (Ground), Pin 2 (Hot), Pin 3 (Cold).

Guidelines for Use
Only authorized personnel should perform service and cleaning on the microphone. Metal surfaces can be cleaned with alcohol or methylated spirits. Take caution to protect the membrane during cleaning.

Declaration of Conformity CE
The Milab BDM-01 complies with all applicable EU directives/regulations and is intended for audio use in approved configurations only.

Lifetime Warranty
Your microphone is covered by a lifetime warranty against manufacturing and material defects. Contact the place of purchase for warranty claims.

Thank You for Choosing a Milab Microphone!
With a history that goes back to the 1930s, Milab is one of the oldest, continuously operating microphone manufacturers in the world.
Every one of our microphones is handcrafted in our plant in southern Sweden.

Our quality control is meticulous and all microphones have to pass several stages of testing, including rigorous audio tests in our anechoic chamber.
We believe in our products, which is why every microphone is delivered with its own individual frequency chart and our industry-leading lifetime warranty.
Congratulations on your purchase and welcome to the Milab family!

Thomas Nöjdh, President

Package Includes

  • Milab BDM-01 condenser microphone
  • Milab 3127 stand holder
  • Milab 3402 windscreen
  • Individual frequency chart
  • Quick guide manual

The Milab BDM-01 Condenser Microphone
The BDM-01 is a dedicated bass drum microphone that is as equally at home in the studio as on the road. It has been designed in every detail to handle the sound pressure level and specific sonic qualities of the bass drum.

The high-end condenser capsule provides excellent attack and HF response,and the frequency curve has been tailored for that perfect bass drum sound.

The dynamic range, sensitivity and pop filters are also optimised for the sound and power of the bass drum.

The heart of the microphone is Milab’s handcrafted VM-44 series condenser capsule that captures the true sound of the drum with fullness and attention to detail that is simply superior to a typical dynamic microphone alternative.

Connection

The BDM-01 can be connected to any mic input, mixer/amplifier, or mic preamp using a standard microphone cable (XLR). The microphone is designed for phantom powering at 48 V (P48, IEC 1938) with positive voltage on the audio lines versus the cable shield.

Microphone XLR pinout:

  1. Ground (shield)
  2. Hot (+ phase)
  3. Cold (- phase)

If the input device does not support phantom power, an external power supply has to be connected between the microphone and the input. Make sure that the extra phantom power has a DC-free output against the mixer, otherwise an RC network has to be incorporated to block the 48 VDC.

Connecting the microphone to an unbalanced input:

Milab-BDM-01-Condenser-Microphone-FIG- \(2\)

Connecting the microphone to an unbalanced input without a transformer.
Pin 2 is the “hot phase“ and should be connected to the input. Pin 3 should be left open:

Milab-BDM-01-Condenser-Microphone-FIG- \(3\)

Guidelines for Use

  • The BDM-01 should be aimed with the top grill towards the sound source.
    See polar diagram.

  • We recommend that the BDM-01 is used with a stand adapter (enclosed) or with the Milab 3227 rubber shock mount (optional). It is not intended to be used as a handheld device.

  • For outdoor recordings, use the enclosed windscreen to minimize wind noise.

  • Protect the microphone from dust and dirt which may damage the membrane.

  • The microphone should not be exposed to water, extreme temperatures or humidity.

Service & Cleaning

All service and repair of the microphone should be performed by authorized personnel. All metal surfaces may be safely cleaned from time to time with alcohol or methylated spirits.

CAUTION! Protect the membrane when cleaning.

Declaration of Conformity CE
Milab Microphones AB declares that this device conforms to all applicable EU directives/regulations. The aforementioned product may only be used for audio purposes and in confi gurations approved by the manufacturer.

Lifetime Warranty

Your microphone is covered by our lifetime warranty. If you experience any problems,please contact the place where you purchased it for further instructions.
The warranty is intended to protect the customer from manufacturing and/or material defects. It does not cover careless or improper handling (intentional or unintentional),such as physical negligence, electrical overload etc.

Terms and conditions apply and are available on request. Please visit www.milabmic.com/warranty for more information.

Contact Information

Milab Microphones AB
Norra Strandgatan 4
S-252 20 Helsingborg

SWEDEN
Phone: +46 (0)42 381620
Fax: +46 (0)42 136350
E-mail: milab@milabmic.com
Website: www.milabmic.com

Milab Microphones is a trademark of Milab Microphones AB, Sweden.Copyright © Milab Microphones,Sweden. All rights reserved. Errors excepted. Subject to changes.
Legal notice/user agreement: Milab Microphones assumes no liability for damages, direct or consequential, which may result from the use of the supplied product. Under no circumstances and under no legal theory, tort, contract, or otherwise, shall Milab Microphones be held liable to you or any other person for any indirect, special, incidental, or consequential damages of any kind, including, without limitation, damages for loss of goodwill, work stoppage, computer or equipment failure or malfunction, or any and all other commercial damages or losses. This limitation of liability shall not apply to liability for death or personal injury to the extent applicable law prohibits such limitation. This User Agreement shall be exclusively subject to the laws of Sweden.

Last revision: 17 January 2024

Specifications

  • Product name: Milab BDM-01
  • Type: Condenser
  • Article number: 1101
  • Frequency response: 20 to 20,000 Hz
  • Polar pattern: Cardioid
  • Max SPL (1 % THD at 1 kHz): 155 dB
  • Sensitivity at 1 kHz: 2 mV/Pa (± 1 dB)
  • Noise level (IEC 179-A): 25 dBA (typical)
  • Power supply: 48 V Phantom (DIN/IEC)
  • Current consumption: 4 mA
  • Output impedance: <200 Ω
  • Min. load impedance: 1 kΩ
  • Connection: 3-pin XLR
  • Length: 142 mm
  • Diameter: 24/47 mm
  • Net weight: 210 g

Frequency chart:

Milab-BDM-01-Condenser-Microphone-FIG- \(4\)

Polar diagram

For more information,please visit:
www.milabmic.com

FAQ

Can the BDM-01 be used for other instruments besides bass drums?

While optimized for bass drums, the BDM-01 can also be used for other low- frequency instruments.

How do I know if my input device supports phantom power?

Check your device's specifications or manual for phantom power compatibility. Most mixers and preamps provide phantom power.

Can I use the BDM-01 without phantom power?

If your device does not support phantom power, you will need an external power supply to use the microphone.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals