SONY YY2083C Home Cinema 5.1 Soundbar User Guide

SONY YY2083C Home Cinema 5.1 Soundbar

Product Information

Specifications:

• Model: YY2083C
• Product Type: Sound Bar
• Brand: Sony

Product Usage Instructions:

Installation and Safety Precautions:

Before using the unit, ensure to read the End User License Agreement (EULA) provided with the product. The EULA applies to both the unit and any connected accessories.

Some key installation and safety precautions include:

• Avoid installing the product in confined spaces like bookcases or built-in cabinets.
• Do not cover the ventilation openings to prevent the risk of fire. Keep the unit away from naked flame sources.
• Avoid exposure to dripping or splashing; do not place liquid-filled objects on the product.
• Keep the unit unplugged from the AC power source when not in use, and ensure easy access to the power cord for quick disconnection in case of emergencies.
• Do not cover ventilation openings, and avoid using the unit on soft surfaces like bedding.

Battery Usage:
For Remote Commander usage, follow these precautions:

• Use the correct type of battery to avoid risks of explosion.
• Dispose of used batteries according to local regulations.
• Avoid exposing batteries to excessive heat sources.

BRAVIA Theatre Bar 9

Before using the unit, be sure to read the End User License Agreement (EULA) supplied with the unit. The content of the agreement also applies to speakers (available separately) connected to the unit (unless those speakers have a separate license agreement).

Model: YY2083C
The term “product” in this document refers to the unit or its accessories.

Owner’s Record
Record the model and serial numbers in the spaces provided below and store them safely. Refer to them whenever you call your Sony dealer regarding this product.

• Model No. __
• Serial No. __

The model and serial numbers to be recorded are located in the following places.

• the bottom of the unit

Do not install the product in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the unit with newspapers, tablecloths, curtains, etc. Do not expose the unit to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on the product. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Install the unit so that the power cord can be unplugged from the wall socket immediately in the event of trouble.

CAUTION
Do not cover ventilation openings. This unit is not intended to be used on soft surfaces (like bedding, blankets etc.). For Remote Commander

CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to local rules and regulations.

Do not expose the batteries (battery pack or batteries installed) to excessive heat, such as sunshine, fire or the like, for a long time. This product has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

The nameplate and important information concerning safety are attached in the following locations:

• the bottom of the unit

For details on the effects of contact with the human body from the mobile phone or other wireless devices connected to the unit, refer to the instruction manual of the wireless device.

For customers in the U.S.A.

NOTE:
This unit has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This unit generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this unit does cause harmful interference to radio or television reception, which can be determined by turning the unit off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and receiver.
• Connect the unit into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The shielded interface cable recommended in this manual must be used with the unit in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

If you have any questions about this product:

• Visit: https://www.sony.com/electronics/support
• Contact: Sony Customer Information Service Center at 1-800-222-7669
• Supplier’s Declaration of Conformity
  • Trade Name : SONY
  • Model: YY2083C
  • Responsible Party: Sony Electronics Inc.
  • Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
  • Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this unit. This unit must not be co-located or operated in conjunction with any other antenna or transmitter. This unit complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This unit should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this unit shall automatically discontinue transmission in case of either absence of information to transmit or operational failure.

• Frequency Tolerance: ±20 ppm

For customers in Canada
This unit contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

1. This unit may not cause interference; and
2. This unit must accept any interference, including interference that may cause undesired operation of the unit.

This unit complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This unit should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

5 150 MHz – 5 350 MHz band is restricted to indoor operations only.
Data transmission is always initiated by software, which is passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this unit shall automatically discontinue transmission in case of either absence of information to transmit or operational failure.

Using the Bar Speaker Mounted on a Wall

Refer to the Help Guide for information on the components and steps required to mount the bar speaker on a wall.
https://helpguide.sony.net/ht/208283c/v1/en/contents/010_Mounting_the_Bar_Speaker_on_a_Wall.html

• Distance between the screws (commercially available) for wall installation: 1 056 mm (41 5/8 in)
• Gap between the wall installation screw head and wall: 3.5 mm to 4.5 mm (5/32 in to 3/16 in)
• Wall mounting bracket (supplied)
• Screw (supplied)

Notes

• Make sure to use the supplied wall mounting brackets when mounting the bar speaker on a wall. Do not mount the bar speaker directly on a wall. The temperature inside the bar speaker rises considerably, which may cause damage or malfunction.
• Hang the bar speaker horizontally on a reinforced wall.
• Ask a Sony dealer or licensed contractor to install the speakers securely and with full consideration of safety.
• Sony shall not be held responsible for any accidents or damage caused by improper installation, lack of installation stability, misuse, or natural disaster.
• For safety, at least two persons should work together to mount the bar speaker.
• Prepare screws (not supplied) suitable for the wall material and hardness. Depending on the wall material, screws that are not suitable may damage the wall.
• Fasten the screws securely into the wall beam.

Licenses

• This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. Please access the following URL and read the contents of the license. https://rd1.sony.net/help/ht/sl/24a/

• The software included in this product contains copyrighted software that is licensed under the GPL/LGPL and other licenses which may require access to source code. You may find a copy of the relevant source code as required under the GPL/LGPL (and other licenses) at the following URL. You may obtain the source code as required by the GPL/LGPL on a physical medium from us for a period of three years after our last shipment of this product by applying through the form at the following URL. This offer is valid to anyone in receipt of this information.
  https://oss.sony.net/Products/Linux/Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code.

• The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses.

• Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2021 Dolby Laboratories. All rights reserved.

• For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. or DTS Licensing Limited. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.

• Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

Precautions

• Before operating the unit, check that the operating voltage is identical to your local power supply. The operating voltage is indicated on the nameplate on the bottom of the unit.
• The supplied AC power cord (mains lead) is designed exclusively for this unit. It should not be used in combination with any other devices.
• Completely disconnect the AC power cord (mains lead) from the AC outlet (mains) if it is not going to be used for an extended period of time. When unplugging the AC power cord (mains lead), always grip the plug. Never pull the cord itself.
• AC power cord (mains lead) must be changed only at a qualified service shop.

On placement

• Do not place the unit near heat sources or in a place subject to direct sunlight, excessive dust, or mechanical shock.
• Use caution when placing the unit on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
• The speakers of this unit are not of magnetically shielded type. Do not place magnetic cards on the unit or near it.
• Do not place metal objects other than a TV around the unit. Wireless functions may be unstable.

How to care for the unit

• Any dust or dirt on the fabric part should be gently removed with a soft cloth.
  • Scratching the dirt off with the fingernails or applying excessive force may damage the fabric.
  • Do not use cleaning brushes, etc., as such tools may damage the fabric depending on the tool material.
  • If the fabric part is heavily soiled, wipe it with a soft cloth lightly dampened with a neutral detergent, then wipe it again with a soft dry cloth. Use of detergents or cleaners other than neutral detergent may cause color fading or fabric damage.
• Wipe the cabinet with a soft cloth dampened with a mild detergent. Do not use abrasive pads, cleansers, or solvents like alcohol or benzene.

On BLUETOOTH® communications

• Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident:
  • in hospitals, near priority seating in trains, locations where inflammable gas is present, near automatic doors, or near fire alarms.

Notes on transferring/disposing

• Be sure to reset the unit, deleting private information and setting information before transferring/disposing. If the unit is transferred or disposed without resetting, private information may be inspected by a third person and abused. For details of the resetting method, refer to Help Guide.

Other notes

• Place the unit in a location with adequate ventilation to prevent heat buildup and prolong the life of the unit.
• Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.
• When connecting the unit to the Internet, use the router (ADSL modem or optical line termination device with the router function supplied with the Internet provider, or Wi-Fi access point). If you connect to the Internet without using the router, a security problem may occur. If you are not sure that the wall outlet for the network line has the router function, ask your manager of the apartment house or Internet provider.
• If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

Trademarks

• Spotify and Spotify logos are registered trademarks of Spotify AB.*
• Spotify service may not be available in some countries/regions. Please visit support.spotify.com for more information.
• The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license.
• Wi-Fi®, Wi-Fi Protected Access® and Wi-Fi Alliance® are registered trademarks of Wi-Fi Alliance.
• Wi-Fi CERTIFIED™, WPA™, WPA2™, and WPA3™ are trademarks of Wi-Fi Alliance.
• The terms HDMI™, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
• LDAC and LDAC logo are trademarks of Sony Group Corporation or its affiliates. All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, ™ and ® marks are not specified.

Specifications

Sound Bar (YY2083C)

Amplifier section

• U.S. models:
  POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

• Front L + Front R:
  With 6 ohm loads, both channels driven, from 250 Hz – 4 000 Hz; rated 20 W per channel minimum RMS power in stereo mode, with no more than 1% total harmonic distortion from 250 mW to rated output.

• Canadian models:

  • POWER OUTPUT (rated)

  • Front L + Front R speaker blocks: 33 W + 33 W (at 6 ohms, 1 kHz 1 % THD)

  • Center + Center speaker blocks: 33 W + 33 W (at 6 ohms, 1 kHz 1 % THD)

  • Front tweeter L + Front tweeter R speaker blocks: 33 W + 33 W (at 4 ohms, 10 kHz 1 % THD)

  • Center tweeter speaker block: 33 W (at 6 ohms, 10 kHz 1 % THD)
    Top L + Top R speaker blocks: 33 W + 33 W (at 6 ohms, 1 kHz 1 % THD)

  • Side L + Side R speaker blocks: 33 W + 33 W (at 6 ohms, 1 kHz 1 % THD)

  • Beam tweeter L + Beam tweeter R speaker blocks: 33 W + 33 W (at 6 ohms, 15 kHz 1 % THD)

• POWER OUTPUT (reference)

  • Front L/Front R speaker blocks: 45 W (per channel at 6 ohms, 1 kHz)
  • Center/Center speaker blocks : 45 W (per channel at 6 ohms, 1 kHz)
  • Front tweeter L/Front tweeter R speaker blocks: 45 W (per channel at 4 ohms, 10 kHz)
  • Center tweeter speaker block: 45 W (at 6 ohms, 10 kHz)
  • Top L/Top R speaker blocks : 45 W (per channel at 6 ohms, 1 kHz)
  • Side L/Side R speaker blocks: 45 W (per channel at 6 ohms, 1 kHz)
  • Beam tweeter L/ Beam tweeter R speaker blocks: 45 W (per channel at 6 ohms, 15 kHz)

Wireless LAN section

• Communication system
  • IEEE 802.11 a/b/g/n/ac
• Frequency band
  • 2.4 GHz, 5 GHz

BLUETOOTH section

• Communication system
  • BLUETOOTH Specification version 5.2
• Frequency band
  • 2.4 GHz band (2.400 0 GHz – 2.483 5 GHz)

USB section (For service use only)

• FOR SERVICE port
• Type A (For connecting USB memory)

HDMI section

• Connector
• Type A (19pin)

General

• Power
  • 120 V AC, 60 Hz
• Power consumption
  • On: 62 W
  • [Network/Bluetooth Standby] is set to ON: 2.3 W or less
  • [Network/Bluetooth Standby] is set to OFF: 0.5 W or less
  • When [Standby Through] is set to OFF, or [Standby Through] is set to [Auto] while the connected TV is turned off.
• Dimensions (approx.) (w/h/d)
  • Not including projection portion
  • Sound Bar : 1 300 mm × 64 mm × 113 mm (51 1/4 in × 2 5/8 in × 4 1/2 in)
  • Sound Bar with the Wall mounting bracket: 1 300 mm × 65.4 mm × 123 mm (51 1/4 in × 2 5/8 in × 4 7/8 in)
  • Sound Bar with the Foot: 1 300 mm × 76.2 mm × 113 mm (51 1/4 in × 3 in × 4 1/2 in)
• Mass (approx.)
  • Sound Bar: 5.5 kg (12 lb 3 oz)
  • Sound Bar with the Wall mounting bracket: 5.8 kg (12 lb 13 oz)
  • Sound Bar with the Foot: 5.5 kg (12 lb 3 oz)

Wireless transmitter/receiver section

• Communication system
  • Wireless Sound Specification version 4.0
• Frequency band
  • 5 GHz

Included items

• Sound Bar (1)
• Remote control (1)
• Battery (2)
• WALL MOUNT TEMPLATE (1)
• Wall mounting bracket (2), Screw (2)
• Foot (2)
• HDMI cable (4K, 8K transmission supported) (1)
• TV center speaker mode cable (1)
• AC power cord (mains lead) (1)
• Documents (1 set)

Design and specifications are subject to change without notice.

Medical Device Interference:
If you use medical devices like pacemakers, consult your doctor before using the product as it contains magnets that may interfere with such devices.

Contact Information:
If you have any questions about the product, you can visit Sony’s official website for support or contact the Sony Customer Information Service Center at 1-800-222-7669.

References:
For detailed instructions on mounting the bar speaker on a wall, refer to the Help Guide provided at the following links:

• Mounting Guide – English

• Mounting
  

• Guide – Other Languages

FAQ:

Q: Can I use this product with other branded accessories?
A: It is recommended to use accessories approved by Sony to ensure compatibility and safety.

Q: How do I clean the soundbar?
A: Use a soft, dry cloth to clean the exterior of the soundbar. Avoid using liquid cleaners or abrasive materials that may damage the surface.

https://rd1.sony.net/help/ht/208283c/h_zz/

©2024 Sony Corporation
Printed in Malaysia
https://www.sony.net/

References

• Patents - DTS
• Spotify - Web Player: Music for everyone
• oss.sony.net/Products/Linux/
• Help Guide | Top
• Help Guide | Top
• Support for Sony products | Sony USA
• Sony Corporation - Home
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>