Powerpak NA-RS5406 Display Turntable User Manual

Powerpak NA-RS5406 Display Turntable User Manual

Thank you for having chosen our product. For your own safety, please read the user manual carefully before installing it.

Remote control CW or CCW 360 °rotating.
Switch on/off power control.

SPECIFICATIONS TECHNIQUES

Article| NA-RS5406|
---|---|---
Power Supply| Input AC110V-240V~50/60Hz, 1.5A ;Output DC12V 2.5A
Power Consumption| 4W
Rotation Speed| 30-50 s/r variable speed
Load Capacity| 25KG
Rotation degree| 360 degree （CW/CCW)
Product Dimensions| Dia54cm, H6cm
Control| Switch control Remote control

Remote control

This remote control is 433MHz frequency band remote control, please use a 12V dry battery when using this remote control;
After the turntable is turned on, the 433MHz remote control is automatically connected with the turntable;
Button 1: The turntable rotates clockwise;
Button 2: the turntable rotates counterclockwise;
Button 3: The speed of the turntable increases;
Key 4: The turntable speed decreases.

OPERATION INSTRUCTIONS

CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous electrical shock when touching the wires.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not responsible for any resulting defects or problems.

• This product is designed for indoor use only.
• Don’t expose the device to extreme heat, moisture or dust.
• The ambient temperature must always be between -5℃ to +45℃.
• The relative humidity must not exceed 50% with an ambient temperature of 45℃.
• The device must only be operated in an altitude between 20 and 2000m.
• Never operate or stockpile the device in surroundings where splash water, rain, moisture or fog which may harm it. Moisture or very high humidity can reduce the insulation and lead to mortal electrical shock or injury.
• Never touch the device with wet hands, as it could lead to mortal electrical shock or injury.
• Make sure that the power cord is never crimped or damaged bu sharp edges, check device and power cord periodically.
• If extension cords are used, make sure the core diameter is sufficient for the required power consumption of the device.
• The voltage and frequency must exactly be the same as stated on the device. Wrong voltage or power outlet could lead to destruction of the device and to mortal electrical shock or injury.
• Never pull out the plug by tugging the power cord, which could result in cord or plug damage and lead to mortal electrical shock and injury.
• Never use the device during the thunderstorm, over voltage could destroy the device.
• Operate the device only after having familiarized with its functions. Most damages are the result of improper operations.
• Please use the original packaging in case the device is to be transported.
• Any unauthorized modifications on the device is forbidden due to safety consideration.
• No liquid or any objects enter into the device, otherwise malfunction or short-circuits may cause mortal injuries.
• Considering longer service life, the product should be suspended around 2 hours in case it has been working more than 8 hours continuously.
• Keep the children away from the device.

MAINTENANCE AND REPAIR

DANGER TO LIFE!

Disconnect from mains before starting maintenance operation!

• We recommend a frequent cleaning of the device. Please use a soft lint-free dry cloth. Never use alcohol or solvents.
• There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by qualified professionals.
• Should you need any spare parts, please contact us by email: sales@asiabk.com;

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement

The device has been evaluate to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>