VOXX Electronics RSR1 Valet Fob Instructions
- June 1, 2024
- VOXX ELectronics
Table of Contents
**VOXX Electronics RSR1 Valet Fob Instructions
**
Product Description
The Valet Fob is an accessory that enables the end user to share their vehicle with a valet person without surrendering their phone. Additionally, it serves as a backup for the end user to access their vehicle.
The valet remote offers several advantages, including:
- Enhanced Security:
- With a valet remote, you can avoid sharing your personal phone, reducing the risk of unauthorized access to your phone and sensitive information.
- Ease of Sharing:
- Sharing a valet remote is more practical and less cumbersome than sharing your phone each time you need someone else to access the car.
- Valet attendants can easily manage and access the shared car without relying on the car owner’s phone, streamlining the valet parking process.
- Controlled Access:
- The valet remote can have limited functionalities compared to your phone, ensuring that the valet only has basic features without full control over the vehicle.
Valet Fob System Overview
Government Regulations
This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesirable operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television, which can be determined by turning the equipment OFF and
ON, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
To satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance.
WARNING!: Changes or modifications not expressly approved by VOXX Electronics. could avoid user’s authority to operate the equipment.
This device complies with Industry Canada license-exempt RSS-247 standards. Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Health Canada RF Exposure Warning:
This device complies with Health Canada’s Safety Code. The installer of this
device should ensure that RF radiation is not emitted in excess of the Heath
Canada’s requirement. The device must maintain a separation distance of 20cm
or more from the person’s body, except for the hands and wrists. Information
can be obtained at:
http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct
/index-eng.php
Warranty Information
LIMITED ONE-YEAR CONSUMER WARRANTY
For a period of ONE YEAR from the date of purchase of a VOXX Electronics
product, Voxx Electronics. (“Voxx”) promises to the original purchaser, to
repair or replace with a comparable reconditioned piece, the security or
remote start accessory piece (hereinafter the “Part”), which proves to be
defective in workmanship or material under normal use, provided the following
conditions are met: the Part was purchased from an authorized VOXX Electronics
dealer; and the Part is returned to VOXX Electronics, postage prepaid, along
with a clear, legible copy of the receipt or bill of sale bearing the
following information: consumer’s name, address, telephone number, the
authorized licensed dealer’s name and complete product and Part description.
This warranty is nontransferable and is automatically void if the Part has
been modified or used in a manner contrary to its intended purpose or the Part
has been damaged by accident, unreasonable use, neglect, improper service,
installation, or other causes not arising out of defect in materials or
construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES,
INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF
NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND VOXX
Electronics NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR
IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. VOXX
Electronics HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL
ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. VOXX Electronics IS NOT
OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE
AUTOMOBILE, ITS PARTS OR CONTENTS, AND VOXX Electronics x HEREBY DISCLAIMS ANY
LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT,
DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM
OR A DISPUTE INVOLVING VOXX Electronics OR ITS SUBSIDIARY, THE PROPER VENUE
SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS
AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM
RECOVERY UNDER ANY CLAIM AGAINST VOXX Electronics SHALL BE STRICTLY LIMITED TO
THE AUTHORIZED VOXX Electronics DEALER’S PURCHASE PRICE OF THE PART. VOXX
Electronics SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT
NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE
LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY
AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED
WARRANTY TO REPLACE OR REPAIR AT VOXX ’S OPTION THE PART AS DESCRIBED ABOVE.
This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. Thiswarranty gives you specific legal rights and you may also have other rights that vary from State to State. VOXX Electronics does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part. For further details relating to warranty information of VOXX Electronics products, please visit the support section of VOXX’s website.
THE WARRANTY IS VOID IF:
- The product has been damaged, altered in any way or tampered with, without the explicit written consent of our certified technician.
- The product is damaged due to accident, fire, flood, shipping and handling, misuse, neglect, or other conditions beyond the control of VOXX Electronics.
- The product has been installed or repaired by anyone other than a certified technician.
- The product has been improperly installed or used.
THE WARRANTY DOES NOT COVER:
- Scratched or worn 8812 module case.
- Installation and/or removal charges for DS4WS module and accessories.
- Shipping and handling charges incurred for product exchange or replacement.
- Any material damage other than to the product itself.
- Harnessing, LED lights, switches, relays, etc.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>