evvo V550 Ceiling Fan Instruction Manual

evvo V550 Ceiling Fan

Specifications

• Product Name: V450 INVISIBLE WHITE Ceiling Fan
• Ideal for outdoor use (IP44 rated)
• Connectivity: WIFI
• Material: WOOD
• Input Voltage: 550 V
• Model Numbers: 550, 551

Product Usage Instructions

1. Parts and Components
   Refer to the instruction manual for a detailed list of parts and components included with the ceiling fan.

2. Before Use
   Read the instruction manual carefully before using the product. Store the manual for future reference.

3. Product Installation
   Ensure the ceiling fan is installed according to the provided guidelines. It is recommended to have two people for installation.

4. Operation
   Use the EVVO speed control mechanism to adjust the fan blade speed. Always follow the operational instructions provided in the manual.

5. Cleaning and Maintenance
   Turn off and unplug the fan before cleaning. Regularly clean and maintain the product as per the instructions to ensure proper functioning.

FAQ

• Q: Can children use this ceiling fan?
  A: This appliance can be used by children aged 8 years and above under supervision. Children should not play with the appliance.

• Q: Can this ceiling fan be used in commercial settings?
  A: The fan is designed for domestic use only and not intended for commercial spaces like bars, restaurants, hotels, etc.

• Q: What should I do if the power cord is damaged?
  A: If the power cord is damaged, it must be replaced by the official EVVO Technical Support Service to avoid any danger.

PARTS Y COMPONENTS

Fig. 1

1. Mounting bracket
2. Remote control
3. Tools for assembly
4. Blade
5. Main body
6. LED-board bracket
7. Lamp
8. LED board
9. Insulating plate

NOTE:
the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the Official EVVO Technical Support Service immediately.

PRODUCT INSTALLATION

General assembly instructions
If you hang the fan on a hook, the latter must withstand at least 100 kg.
To prevent personal injury and damage, make sure that the location where the appliance is going to be installed allows a 2.3-metre clearance from the blades to the floor and a 76-cm clearance from the blades to any wall or object. Fig. 2

Make sure that the building structure can hold the full weight of the fan. This fan can be installed on a normal or vaulted ceiling with a downrod. The hanging length can be extended by using a longer down rod. Assembly according to the type of ceiling:

Wooden ceiling. Fig. 3
Concrete ceiling. Fig. 4

To assemble this ceiling fan, follow the steps below (Fig. 3-9):

1. Follow the instructions in the installation section to install the mounting bracket according to ceiling type.
2. Then take the main body of the fan and attach it to the mounting bracket as shown in Figure 6.
3. Take the receiver and make the electrical connections by means of quick connectors. Once connections are made, insert the receiver inside the upper part of the fan main body. Follow the wiring instructions shown in Figure 5.
4. Unhook the fan from the hook and screw the mounting bracket to the main body. Screw the two screws into the mounting bracket without over-tightening them. Then, attach the fan main body to the previously fixed screws and tighten the latter. Fig. 6.
5. To install the blades, use the screws and washers supplied in the installation kit. Install the blade making sure the pointed end faces downwards. Align the blade with the holes on the underside of the main body and insert the screws. Repeat this step until all blades are installed. Fig. 7
6. Connect the LED board to the two electrical connectors and fix it to the LED-board bracket using the magnets provided on the LED board. Fig. 8-9
7. Finally, take the lamp and screw it onto the LED board bracket as shown in Figure 10.

Warning
Self-tapping screws are only suitable for wooden ceilings. In case of installing the ceiling fan to concrete ceilings or joists, use a drill for making the holes and plugs or expansion screws (not included).

OPERATION

Remote control. Fig. 11

1. Power button

2. Speed control

3. Winter function

4. Summer function

5. Natural Breeze

6. Natural Breeze shut-off

7. Timer
   Use the 6 speed buttons to select the air power level.
   Press the power button to turn the device off.
   Use the 3 timer buttons to select the fan’s operation time: 1, 2, or 4 hrs. The fan will turn off once the selected time has elapsed.
   Press the light button to turn the fan’s lamp on and off.
   The remote control requires 2 x 1.5 V-3AAA batteries.

   • Winter Function: press button 3 for the fan to make air flow from the bottom upwards, bringing cold air to the top of the room.
   • Summer Function: press button 4 for the fan to make air flow from the top downwards, bringing cold air to the bottom of the room.
   • Natural Breeze : activate this mode by pressing the corresponding button on the remote control. The fan will run at different power levels in a cycle, producing a feeling of fresh air.

Warning:
Invert the spinning direction of the fan while in operation. Hold down the button for approx. 3 seconds: the appliance will beep, and the blades will start slowing down until they stop spinning. After a few seconds, they will start spinning again in the opposite direction.
Pairing the remote control with the fan: press the power button for 5 seconds until you hear a beep.
Wi-Fi connection: press the 1h and 4h buttons simultaneously for 5 seconds until you hear a beep. Follow the instructions in section 5. Wi-Fi connectivity and mobile App.

Warnings
The remote control operates through RF Wireless digital transmission technology. If both the fan and the lamp are equipped with a switch, turn on the fan at top speed and turn the light on before using the remote control.
If the fan or the light cannot be controlled through the remote control, check if the batteries in the remote control are in good conditions and if they make good contact, that the positive and negative electrodes are in the correct position, and if the batteries are charged.
If the fan or the light cannot be controlled through the remote control, check if there are other remote-controlled appliances in the same area and check if the transmitter buttons are pressed. Appliances with similar remote-control systems may cause interference. This does not include infrared remote controls.
Pay attention to the appliance voltage. Too low a voltage may cause the remote control to not work. The technical specifications are indicated in this manual.
If the remote control is not going to be used for a long time, remove the batteries.

WI-FI CONNECTIVITY AND MOBILE APP

Scan the QR shown to download the “Smart Life” App available for both iOS and Android.

1. Open the app and in the top right corner click on “+” and Add a device.
2. In the “Electrical” category select “Air conditioning”.
3. You must be connected to a 2.4 Ghz Wifi network.
4. Follow the synchronisation steps in the App.

CLEANING AND MAINTENANCE

• Make sure to disconnect the fan before cleaning it.
• Do not immerse any of the parts of the appliance in water or splash them with any other liquid.
• Do not use solvents or any other chemical products for cleaning.
• Use a soft, damp cloth to clean the surface of the device.

TECHNICAL SPECIFICATIONS

• Model: EVVO V550/V551 Wood Wifi
• Product reference: V0387/V0388
• Voltage: 220-240 V ~
• Frequency: 50/60 Hz
• Power: 40 W
• IP44
• LED: 18 W

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or cells must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries. Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

EVVO shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
It is recommended that repairs are carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official EVVO Technical Support Service:

• 910 200 422 – TELEPHONE ATTENTION
• 633 525 883 – WHATSAPP ATTENTION

Evvo Home Europe S.L. Crta. Madrid 9
37900 Santa Marta de Tormes (Salamanca) SPAIN
CIF: B-37556842

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>