Husqvarna LC 251i Cordless Lawnmower Instruction Manual

Husqvarna LC 251i Cordless Lawnmower

Specifications:

• Model: LC 251i, LC 251iS
• Type: Pedestrian-controlled rotary lawn mower
• Grass Collection: Grass catcher
• Intended Use: Cutting grass

Product Overview:

The product features various components including a motor brake handle, start inhibitor, drive bail (LC 251iS), rear cover, grass catcher, handle knob, cutting height lever, discharge lock, side discharge cover, battery lid, safety key, warning indicator (error LED), SavE button, cutting cover, handle/handlebar, lift handles, and side discharger.

Product Usage Instructions:

Assembly:

Follow the assembly instructions provided in the manual to set up the lawn mower correctly. Make sure all components are securely attached before operation.

Operation:

1. Start the mower by releasing the motor brake handle and using the start inhibitor.
2. Adjust the cutting height using the cutting height lever according to your preference.
3. Use the grass catcher to collect grass or attach the side discharge deflector for side discharge.

Maintenance:

Regularly clean the mower after each use to prevent grass buildup. Check and replace blades if necessary. Refer to the maintenance section in the manual for detailed instructions.

Troubleshooting:

Refer to the troubleshooting section in the manual if you encounter any issues during operation. Follow the recommended steps to resolve common problems.

FAQ

Q: Can I use the lawn mower for tasks other than cutting grass?

A: No, the product is intended only for cutting grass. Do not use it for other tasks to ensure safety and proper functionality.

Q: How do I adjust the cutting height of the mower?

A: Use the cutting height lever located on the mower to adjust the cutting height according to your desired level.

Introduction

Product description

The product is a pedestrian-controlled rotary lawn mower. The grass is collected in a grass catcher. Attach the side discharge deflector for side discharge of the grass.

Intended use
Use the product to cut grass. Do not use the product for other tasks.

Product overview

1. Motor brake handle
2. Start inhibitor
3. Drive bail (LC 251iS)
4. Rear cover
5. Grass catcher
6. Handle knob
7. Cutting height lever
8. Discharge lock
9. Side discharge cover
10. Battery lid
11. Symbols
12. Safety key
13. Warning indicator (error LED)
14. SavE button
15. Cutting cover
16. Handle / Handlebar
17. Lift handles
18. Side discharger

Symbols on the product

Product damage
We are not responsible for damages to our product if:

• the product is incorrectly repaired.
• the product is repaired with parts that are not from the manufacturer or not approved by the manufacturer.
• the product has an accessory that is not from the manufacturer or not approved by the manufacturer. the product is not repaired at an approved service center or by an approved authority.

Safety

Safety definitions
Warnings, cautions and notes are used to point out specially important parts of the manual.

WARNING: Used if there is a risk of injury or death for the operator or bystanders if the instructions in the manual are not obeyed.

CAUTION: Used if there is a risk of damage to the product, other materials or the adjacent area if the instructions in the manual are not obeyed.

Note: Used to give more information that is necessary in a given situation.

General product safety warnings

WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference. The term “product” in the warnings refers to your mains-operated (corded) product or battery- operated (cordless) product.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. The product create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating the product. Distractions can cause you to lose control.

Electrical safety

• Product plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) products. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose products to rain or wet conditions. Water entering a product will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the product. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a product outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a product in a damp location is unavoidable, use a residual current device (RCD)
• protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a product. Do not use a product while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating products may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the product. Carrying products with your finger on the switch or energising products that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the product on. A wrench or a key left attached to a rotating part of the product may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the product in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of products allow you to become complacent and ignore product safety principles. A careless action can cause severe injury within a fraction of a second.

Product use and care

• Do not force the product. Use the correct product for your application. The correct product will do the job better and safer at the rate for which it was designed.

• Do not use the product if the switch does not turn it on and off. Any product that cannot be controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the product before making any adjustments, changing accessories, or storing products. Such preventive safety measures reduce the risk of starting the product accidentally.

• Store idle products out of the reach of children and do not allow persons unfamiliar with the product or these instructions to operate the product. Products are dangerous in the hands of untrained users.

• Maintain products and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the product’s operation. If damaged, have the product repaired before use. Many accidents are caused by poorly maintained products.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the product, accessories and tool bits etc.
  in accordance with these instructions, taking into account the working conditions and the work to
  be performed. Use of the product for operations different from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the product in unexpected situations.

Battery tool use and care

• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use products only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritations or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130 °C / 265 °F may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Lawnmower safety warnings

• Do not use the lawnmower in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.

• Thoroughly inspect the area for wildlife where the lawnmower is to be used. Wildlife may be injured by the lawnmower during operation.

• Thoroughly inspect the area where the lawnmower is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown objects can cause personal injury.

• Before using the lawnmower, always visually inspect to see that the blade and the blade assembly are not worn or damaged. Worn or damaged parts increase the risk of injury.

• Check the grass catcher frequently for wear or deterioration. A worn or damaged grass catcher may increase the risk of personal injury.

• Keep guards in place. Guards must be in working order and be properly mounted. A guard that is loose, damaged, or is not functioning correctly may result in personal injury.

• Keep all cooling air inlets clear of debris. Blocked air inlets and debris may result in overheating or risk of fire.

• While operating the lawnmower, always wear non-slip and protective footwear. Do not operate the lawnmower when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with the moving blade.

• While operating the lawnmower, always wear long trousers. Exposed skin increases the likelihood of injury from thrown objects.

• Do not operate the lawnmower in wet grass. Walk, never run. This reduces the risk of slipping and falling which may result in personal injury.

• Do not operate the lawnmower on excessively steep slopes. This reduces the risk of loss of control, slipping and falling which may result in personal injury.

• When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down and exercise extreme caution when changing direction. This reduces the risk of loss
  of control, slipping and falling which may result in personal injury.

• Use extreme caution when reversing or pulling the lawnmower towards you. Always be aware of your surroundings. This reduces the risk of tripping during operation.

• Do not touch blades and other hazardous moving parts while they are still in motion. This reduces the risk of injury from moving parts.

• When clearing jammed material or cleaning the lawnmower, make sure all power switches are off and the battery pack is disconnected. Unexpected operation of the lawnmower may result in serious personal injury.

• When clearing jammed material or cleaning the lawnmower, make sure all power switches are off and remove the disabling device. Unexpected operation of the lawnmower may result in serious personal injury.

Residual current device
Use a residual current device with a tripping current of maximum 30 mA.

General safety instructions

WARNING: Read the warning instructions that follow before you use the product.

• This product is dangerous if used incorrectly or if you are not careful. Injury or death can occur if you do not obey the safety instructions.
• This product produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this product.
• Always be careful and use your common sense. If you are not sure how to operate the product in a special situation, stop and speak to your Husqvarna dealer before you continue.
• Keep in mind that the operator will be held responsible for accidents that involve other persons or their property.
• Keep the product clean. Make sure that you can clearly read signs and decals.
• Never allow children or people unfamiliar with these instructions to use the appliance. Local regulations may restrict the age of the operator.
• Always monitor a person, with decreased physical capacity or mental capacity, that uses the product. A responsible adult must be there at all times.
• Do not use the product if you are tired, ill, or under the influence of alcohol, drugs or medicine. This has a negative effect on your vision, alertness, coordination and judgment.
• Do not use the product if it is damaged or does not operate correctly.
• Do not change this product or use it if it is possible that it has been changed by others.

Work safety

WARNING: Read the warning instructions that follow before you use the product.

• Use this product to cut grass lawns only. It is not permitted to use it for other tasks.
• Use personal protective equipment. Refer to Personal protective equipment on page 7.
• Make sure that you know how to stop the motor quickly in an emergency.
• Do not operate the product in rain or wet conditions. The risk of electrical shock increases if water enters the product.
• Do not operate the product unless the blade and all covers are attached correctly. An incorrectly attached blade can come loose and cause personal injury.
• Make sure that the blade does not hit objects such as stones and roots. This can do damage to the blade and bend the motor shaft. A bent axle causes heavy vibration and a very high risk that the blade becomes loose.
• If the blade hits an object or if vibrations occur, stop the product immediately. Stop the motor, turn the safety key to 0 and remove the battery. Wait until moving parts stop. Examine the product for damages. Tighten loose parts. Repair damages and replace damaged parts. Let an approved service agent do the repair.
• Never attach the motor brake handle permanently to the handle when the motor is started.
• Put the product on a stable, flat surface and start it. Make sure that the blade does not hit the ground or other objects.
• Always stay behind the product when you operate it.
• Let all the wheels stay on the ground and keep 2 hands on the handle when you operate the product. Keep your hands and feet away from the rotating blades.
• Do not tilt the product when you start the motor or during operation of the product.
• Be careful when you pull the product rearward.
• Never lift up the product when the motor is started. If you must lift the product, first stop the motor, turn the safety key to 0 and remove the battery.
• Do not walk rearward when you operate the product.
• Stop the motor when it is necessary to tilt the product for transportation or before you move across areas without grass, for example paths made of gravel, stone and asphalt.
• Do not run with the product when the motor is started. Always walk when you operate the product.
• Stop the motor before you change the cutting height. Never make adjustments with the motor started.
• Never let the product stay out of view with the motor started. Stop the motor and make sure that the cutting equipment does not rotate.
• The vibrations in the product during operation can be different from the declared vibration value in Technical data on page 22. The difference is caused by variations in how the product is used.
• If you operate the product frequently or for long periods of time, take breaks regularly to prevent injury from vibrations.

Safety instructions for operation
Personal protective equipment

WARNING: Read the warning instructions that follow before you use the product.

• Personal protective equipment cannot fully prevent injury but it decreases the degree of injury if an accident does occur. Let your dealer help you select the right equipment.
• Use heavy-duty slip-resistant boots or shoes. Do not use open shoes or go with bare feet.
• Use heavy, long pants.
• Use protective gloves when necessary, for example when you attach, examine or clean the cutting equipment.
• We recommend to use hearing protection.

Safety devices on the product

WARNING: Read the warning instructions that follow before you use the product.

• Do not use a product with safety devices that are damaged or do not operate correctly.
• Do not remove or do modifications to safety devices.
• Do a check of the safety devices regularly. If the safety devices are damaged or do not operate correctly, speak to your Husqvarna service agent.

To do a check of the cutting cover
The cutting cover decreases vibrations in the product and decreases the risk of injury from the blade.

Examine the cutting cover to make sure that there are no damages such as cracks.

To do a check of the safety key
The safety key is below the battery lid. The safety key connects the battery that supplies the motor with power.

• Start and stop the motor to do a check of the safety key.

To do a check of the rear cover
The rear cover decreases the risk that objects eject in the direction of the operator.

• Make sure that the rear cover is not damaged.
• Make sure that the springs that close the rear cover are not damaged.
• Replace damaged springs and damaged parts.
• Make sure that the rear cover can move smoothly on the hinges.

To do a check of the motor brake handle
The motor brake handle stops the motor. When the motor brake handle is released, the motor stops.

• Start the product. Refer to To start the product on page 13.
• Release the motor brake handle.

• Make sure that the product stops. If the motor does not stop in 3 seconds, let an approved Husqvarna service agent adjust the motor brake.

To do a check of the start inhibitor
Do a check of the start inhibitor to make sure that it prevents operation of the motor.

1. Push the motor brake handle in the direction of the handlebar. The start inhibitor stops the movement.
2. Push the start inhibitor out.

3. Release the start inhibitor and make sure that it goes back to its initial position.

Battery safety

WARNING: Read the warning instructions that follow before you use the product.

• Use Husqvarna rechargeable batteries as a power supply for related Husqvarna products only. To prevent injury, do not use the battery as a power supply for other devices.
• Do not use non-rechargeable batteries.
• Risk of electrical shock. Do not connect the battery terminals to keys, coins, screws or other metal. This can cause a short circuit of the battery.
• Do not put objects into the air slots of the battery.
• Keep the battery away from sunlight, heat or open flame. The battery can explode and cause burns and/or chemical burns.
• Keep the battery away from rain and wet conditions.
• Keep the battery away from microwaves and high pressure.
• Do not try to disassemble or break the battery.
• If the battery leaks, do not let the liquid touch your body or eyes. If you have touched the liquid, clean the area with a large quantity of water and get medical aid.
• Use the battery in the product only when the ambient temperature is between 5 °C – 40 °C.
• Use the battery charger only when the ambient temperature is between 5 °C – 40 °C.
• The battery will not charge if the battery temperature is more than 50 ° C.
• Do not clean the battery or the battery charger with water. Refer to To clean the battery and the battery charger on page 16.
• Do not use a damaged battery.
• Keep batteries in storage away from metal objects such as nails, coins, jewellery.

Battery charger safety

WARNING: Read the warning instructions that follow before you use the product.

• Use the QC battery chargers to charge Husqvarna replacement batteries only.

• Risk of electrical shock or short circuit. Do not put objects into the air slots of the charger. Do not try to disassemble the battery charger. Do not connect the charger terminals to metal objects. Use an approved mains socket.

• This product produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this product.

• Regularly make sure that the power cord of the battery charger is not damaged and that there are no cracks in it.

• Do not lift the battery charger by the power cord. To disconnect the battery charger from a mains socket, pull out the plug. Do not pull the power cord.

• Keep the power cord and extension cables away from water, oil and sharp edges. Make sure that the cable is not pinched in doors, fences or equivalent. It can cause the charger to become energized.

• Do not clean the battery charger with water.

• The battery charger can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack
  of experience and knowledge if they have been given supervision or instruction concerning use of the battery charger in a safe way and understand the hazards involved. Children shall not play with the battery charger. Cleaning and user maintenance shall not be made by children without supervision.

• Do not charge non-rechargeable batteries in the battery charger.

• Do not use the battery charger near flammable materials or materials that can cause corrosion. Do not cover the battery charger. Pull out the plug to the battery charger if there is smoke or fire.

• Do not use a damaged battery charger.

• Only charge the battery indoors in a room with good airflow and away from sunlight. Do not charge the battery in wet conditions.

Safety instructions for maintenance

WARNING: Read the warning instructions that follow before you use the product.

• To prevent accidental start during maintenance, turn the safety key to 0 and remove the battery.
• Wait at minimum 5 seconds before you start the maintenance.
• Only do the maintenance work written in this operator’s manual. More extensive work and professional repairs must be done by an approved service agent. Speak to your nearest service agent for more information.
• Do the maintenance work correctly to increase the lifetime of the product and decrease the risk of accidents.
• Replace damaged, worn or broken parts. Always use original spare parts from the manufacturer. Other spare parts can cause damage to the product and increase the risk of accidents.
• To prevent injury, do not remove or do modifications to safety devices.
• Put on heavy duty gloves when you use the cutting equipment. The blade is very sharp and cuts can easily occur.
• Keep the cutting edges sharp and clean for the best and safest performance.
• Let your service agent regularly examine the product and make necessary adjustments and repairs.
• Obey the instructions for how to change accessories. Only use accessories from the manufacturer.
• When not in operation, keep the product, battery and battery charger apart in a dry, indoor and locked area. Make sure that children and persons that are not approved cannot get access to the product, battery or battery charger.

Assembly

Introduction

WARNING: Before you assemble the product, read the safety chapter.

WARNING: To prevent accidental start during assembly, turn the safety key to 0, remove the battery and wait at minimum 5 seconds.

To assemble the handle

Note : It is recommended that 2 persons do this procedure.

Note: Do not remove the product from the box when you assemble the handle. The box can be used for support for the handle during the assembly.

1. Lift and rotate the handle.

CAUTION: Be careful and make sure that the cable does not become damaged when you rotate the handle.

2. Put the handle on top of the product. Tilt the handle against the box for support of the handle. Refer to the illustration.

3. Push the screw (A) through the handle (B), the plastic washer (C) and the handle support bracket (D).

4. Tighten the nut (E) fully.

5.  Remove the product from the box.

6. Fold the handle to upright position

7. 7. Set the handle height to the lowest position. Refer to
   To adjust the handle on page 11.

8. Attach the cable to the lower part of the handle with the cable clip.

9. Attach the lower part of the cable to the handle support bracket with the cable tie. Cut off the remaining part of the cable tie.

Note: Make sure that the cable is correctly attached. A cable that is too loose cause damage to the cable when the grass catcher is installed.

To adjust the handle

1. Loosen the lower knobs.

2. Move the knobs to the lower end of the grooves on the left and the right side of the product.

3. Set the handle height in one of the 2 available positions.

4. Move the knobs up in the direction of the handle until they stop and you hear a click.

5. Tighten the knobs fully.

Operation

Introduction

WARNING: Before you operate the product, you must read and understand the safety chapter.

Husqvarna Connect
Husqvarna Connect is a free app for your mobile device. The Husqvarna Connect app gives extended functions for your Husqvarna product:

• Extended product information.
• Information about, and help with, product parts and servicing.

To start to use Husqvarna Connect

1. Download the Husqvarna Connect app on your mobile device.
2. Register in the Husqvarna Connect app.
3. Do the instruction steps in the Husqvarna Connect app to connect and register the product.

To set the product in operation position

1. Make sure that the lower knobs are loose. Refer to
   To adjust the handle on page 11.

2. Fold the handle to upright position.

3. Move the knobs up in the direction of the handle until they stop and you hear a click.

4. Tighten the knobs fully.

WARNING: Do not operate the product unless the handle is fully folded up and set in one of the applicable height positions. Refer to To adjust the handle on page 11.

To set the cutting height

1. Move the cutting height lever rearward to increase the cutting height.
2. Move the cutting height lever forward to decrease the cutting height.

CAUTION: Do not set the cutting height too low. The blades can hit the ground if the surface of the lawn is not level.

Battery

WARNING: Before you use the battery, you must read and understand the safety chapter. You must also read and understand the operator’s manual for the battery and the battery charger.

Keep the battery and the battery charger in correct ambient temperatures.

Battery status
The display shows the remaining battery capacity and if there are problems with the battery. Push the battery indicator button to get information of the state of charge of the battery. The warning symbol on the battery is on when an error has occurred. Refer to Battery on page 18.

LED 1, LED 2, LED 3 are

lit

| The battery is 51%-75% charged
LED 1, LED 2 are lit| The battery is 26%-50% charged
LED 1 is lit| The battery is 6%-25% charged.
LED 1 flashes| The battery is 0%-5% charged.

To charge the battery
Charge the battery before the first use. The battery is only 30% charged when supplied to the customer.

Note: The battery charger must be connected to the voltage and frequency specified on the rating plate.

The battery does not charge if the battery temperature is above 50°C. The battery charger decreases the temperature of the battery before it starts to charge.

1. Connect one end of the power cord for the battery charger into the socket of the battery charger.

2. Connect the other end of the power cord for the battery charger in an grounded mains socket. The LED on the battery charger flashes green one time.

3. Put the battery in the battery charger. The green light on the charger comes on when the battery is correctly connected to the battery charger.

4. When all LEDs on the battery have come on the battery is fully charged. Charge the battery for maximum 24 hours.

5. To disconnect the battery charger from the mains socket, pull the plug, not the power cord.

6. Remove the battery from the battery charger.

To start the product

1. Open the battery lid.

2. Put a charged battery in 1 of the battery holders. For longer operation time, put a second charged battery in the other battery holder.

3. Turn the safety key to 1.

4. Stay behind the product.

5. Loosen the start inhibitor.

6. Push the motor brake handle in the direction of the handlebar.

To use the drive on the wheels (LC 251iS)

• Push the drive bail in the direction of the handlebar.

• Release the drive bail to disengage the drive, for example when you go near an obstacle.

• Before you pull the product rearward, disengage the drive and push the product forward approximately 10 cm.

To use the SavE™ function

• The product has a battery saving function (SavE™) that gives longer operation time.

• Push the SavE™ button to position 1 to start the function.

• Push the SavE™ button to position 0 to stop the function.

Note: The SavE™ function stops automatically if the ground conditions make it necessary to have a higher output. The SavE™ function starts automatically again when the ground conditions let it.

High load function
When the product cuts long or wet grass, the motor automatically increases rpm. The motor goes back to standard mode when high load is not necessary.

Motor stalling
During operation, the blade and motor can temporarily stop because of obstacles such as grass blockage below the cutting cover. If this occurs and you keep the motor brake handle pushed down, the product restarts automatically. If the product does not restart in 5-10 seconds, it can be necessary to clean below the cutting cover. Refer to To clean the product on page 16.
WARNING: If the motor stops, the product tries to restart automatically for 5-10 seconds. Wait for a minimum of 15 seconds before you do a check of the cutting cover.
WARNING: Before a check of the cutting cover, release the motor brake handle, turn the safety key to 0, remove the battery and wait for a minimum of
5 seconds. There is a risk of injury if the obstacle is removed and the product accidentally starts.

To stop the product
WARNING: Turn the safety key to 0 before you let the product out of view.

1. Release the motor brake handle to stop the motor.

Note: For LC 251iS. To stop the drive of the wheels, release the drive bail.

2. Open the battery lid and turn the safety key to 0.

3. To remove the battery, push the 2 release buttons and pull out the battery.

4. Charge the battery if it is weak. For more information, refer to To charge the battery on page 12.

To use the product with the grass catcher

WARNING : Do not operate the product without a grass catcher installed or without the rear cover closed. Objects can eject and cause injury to the operator.

1. Lift the rear cover.

2. Put the grass catcher on the bracket.

3. Release the rear cover and put it on top of the grass bag frame.

To change the product to side discharge mode

1. Lift the rear cover and remove the grass bag, if it is installed.

2. Close the rear cover and make sure that it is tightly closed against the product.

3. Lift the discharge lock.

4. Open the side discharge cover and install the side discharge deflector onto the support pins.

5. Let the side discharge cover close against the side discharge deflector. Make sure that the side discharge deflector is tightly in position before you operate the product.

To empty the grass catcher

CAUTION: Lift the grass catcher when you move it to prevent wear.

1. Lift the grass catcher with the frame handle.
2. Use the frame handle and the bag handle when you empty the grass catcher.

To get a good result

• Always use a sharp blade. A blunt blade gives an irregular result and the cut surface of the grass becomes yellow. A sharp blade also uses less energy than a blunt blade.
• Do not cut more than ⅓ of the length of the grass. Use the highest cutting height when you start to cut the grass. Examine the result and lower the cutting height to an applicable level. If the grass is very long, operate slowly and cut 2 times if it is necessary.
• Cut in different directions each time to prevent stripes in the lawn.
• Lift the rear cover and remove the grass catcher.
• If a mulch plug and a mulch blade are attached, remove them.
• Close the rear cover before you operate the product. When you operate the product, the cut grass discharges below the rear cover.
• Keep the cutting cover clean. Buildup from grass and dirt on the inner side of the cutting cover can decrease the cutting result. Refer to To clean the product on page 16.

Maintenance

Introduction

WARNING: Before you do maintenance, you must read and understand the safety chapter.

For all servicing and repair work on the product, special training is necessary. We guarantee the availability of professional repairs and servicing.

For more detailed information, refer to www.husqvarna.com.

Maintenance schedule
The maintenance intervals are calculated from daily use of the product. The intervals change if the product is not used daily.
For maintenance identified with * refer to instructions in Safety on page 3.

Make sure that the release buttons on the battery operates correctly and that the battery locks into the product| X|  |
Examine the battery charger for damage and make sure that it operates correct- ly.|  | X|
Examine the connections between the battery and the product. Also examine the connection between the battery and the battery charger.|  |  | X

To do a general inspection

• Make sure that the nuts and screws on the product are tightened.
• Make sure that the cables on the product are not in a position where they can get damaged.

To clean the product

• Clean plastic parts with a clean and dry cloth.
• Do not use water to clean the product. Water can enter the battery or the motor and cause short circuit or damage to the product.
• Do not use a high pressure washer to clean the product.
• Do not flush water directly on the motor.
• Use a brush to remove leaves, grass and dirt.

To clean the battery and the battery charger

WARNING: Do not clean the battery or the battery charger with water.

WARNING: Do not use any chemical substances to clean the battery.

• Make sure that the battery and the battery charger are clean and dry before you put the battery into the battery charger.
• Clean the battery terminals with compressed air or use a soft and dry cloth.
• Clean the surfaces of the battery and the battery charger with a soft and dry cloth.

To examine the cutting equipment

WARNING: To prevent accidental start, turn the safety key to 0, remove the battery and wait a minimum 5 seconds.

WARNING: Use protective gloves when you do maintenance on the cutting equipment. The blade is very sharp and cuts can easily occur.

1. Examine the cutting equipment for damage or cracks. Always replace a damaged cutting equipment.
2. Look at the blade to see if it is damaged or blunt.

Note: It is necessary to balance the blade after it is sharpened. Let a service center sharpen, replace and balance the blade. If you hit an obstacle that causes the product to stop, replace the damaged blade. Let the service center estimate if the blade can be sharpened or must be replaced.

To replace the blade
Refer to Technical data on page 22 for the correct type of blade.

WARNING: Lock the blade with a block of wood to prevent injury to fingers when you replace the blade. The blade can be moved when the motor is off and fingers can become trapped between the blade and stationary parts.

1. Lock the blade with a block of wood.

2. Remove the blade bolt, the washers and the blade.

3. Examine the blade support and blade bolt to see if there are damages.
4. Examine the motor shaft to make sure that it is not bent.
5. When you attach the new blade, point the angled ends of the blade in the direction of the cutting cover.

6. Make sure that the blade is aligned with the center of the motor shaft.
7. Lock the blade with a piece of wood. Attach the washers and tighten the bolt with a torque of 23 – 28 Nm.

8. Pull the blade around by hand and make sure that it turns freely.
   WARNING: Use heavy duty gloves.
   The blade is very sharp and cuts can easily occur.

9. Start the product to do a test of the blade. If the blade is not correctly attached, there is vibration in the product or the cutting result is unsatisfactory.

To do a check of the side discharge deflector

The side discharge deflector is attached to the side discharge opening of the product. It decreases the risk of objects to eject in the direction of the mow position of the operator.

1. Make sure that the side discharge deflector is not damaged.
2. Examine the side discharge deflector. Make sure that you do not see defects, such as cracks or broken springs that push the door to close.
3. Replace the side discharge deflector or the springs if they are damaged.

Troubleshooting

Battery

to To charge the battery on page 12.

The battery error LED flashes.

| ****

The battery is too cold or too hot to use.

| Let the battery cool down or move it indoors to warm it up. When the battery has the correct temperature, it can be used again. Use the battery in the product only when the ambient temperature is 5 °C–40 °C.
The battery is empty.| Charge the battery. Refer to To charge the battery on page 12.
The battery error LED comes on.| There is a permanent battery error.| Speak to your Husqvarna servicing dealer.

Battery charger

The error LED flashes or comes on.

| The battery charger is too cold or too hot to use.| Let the battery charger cool down or move it indoors to warm it up. When the battery charger has the correct temperature, it can be used again. Use the battery charger when the ambient temperature is 5 °C–40 °C.
Other errors.| Speak to your Husqvarna servicing dealer.

Lawn mower

The warning indicator (error LED) is found below the battery lid.

battery and wait a minimum of 5 seconds. Remove possible obstacles and make sure that the blade can rotate freely. If the prob- lem continues, speak to your Husqvarna servicing dealer.
5| The motor speed drops too much, and the motor stops.| Increase the cutting height. Refer to To set the cutting height on page 12.
61| The wheels or transmission is blocked.| Turn the safety key to 0 to prevent ac- cidental start. Remove the battery and wait a minimum of 5 seconds. Remove the possible obstacles and make sure that the wheels can rotate freely. If the problem continues, speak to your Husq- varna servicing dealer.
10| The motor control is too hot.| Stop the motor and wait until it has be- come cool.
Error LED flashes. The product stops.| No flashes| Battery connector failure.| Examine the battery connector.
3| There is overload in the mo- tor.| Increase the cutting height. Refer to To set the cutting height on page 12.
8| The battery is weak.| Charge the battery. Refer to To charge the battery on page 12.
9| Battery error or no signal from battery.| Put the battery in the product correctly and examine the battery connector. If the error LED on the battery flashes. Refer   to Battery on page 18.
15| Incorrect start procedure. The motor brake handle has been engaged before the motor starts.| Release the motor brake handle and wait approximately 5 seconds. Push the motor brake handle down again to start the product.
Problem| Error LED (number of flashes)| Cause| Solution
---|---|---|---
Other errors.| If other errors occur, turn the safety key to 0, remove the battery and speak to your Husqvarna servicing dealer.

Transportation, storage and disposal

Introduction

WARNING: To prevent accidental start during transport and storage turn the safety key to 0, remove the battery and wait a minimum of 5 seconds.

To set the product in transport position

1. Loosen the lower knobs.
2. Move the knobs to the lower end of the grooves on the left and the right side of the product.

3. Fold the handle forward.

Transportation

• The Dangerous Goods Legislation requirements apply to the contained Li-ion batteries.
• For commercial transports special requirements on package and labels must be obeyed.
• Make sure that you obey the regulations for dangerous material when you prepare the product for transport. Local regulations can apply.
• Always remove the battery for transport.
• Put tape on the battery connectors and make sure that the battery cannot move around during transport.
• Attach the product during transport.

Storage

• Before storage, let the product become cool.
• Always remove the battery for storage.
• To prevent accidents, make sure that the battery is not connected to the product during storage.
• Keep the battery charger in a closed and dry space.
• Keep the battery and the battery charger in a dry space where there is no moisture or frost.
• Disconnect the battery from the battery charger during storage.
• Do not keep the battery where static electricity can occur. Do not keep the battery in a metal box.
• Keep the product where the ambient temperature is between -10°C and 40°C.
• Keep the battery where the ambient temperature is between 5 °C and 25 °C and out of sunlight.
• Keep the battery charger where the ambient temperature is between 5 °C and 45 °C and out of sunlight.
• Make sure that the battery is charged to 30% – 50% before you put it in storage for long periods.
• Keep the product, battery and battery charger in a locked area out of reach for children and not approved persons.
• Clean the product and make sure that the grass catcher is empty.
• Do the maintenance procedures given in this operator’s manual. Refer to Maintenance on page 16.
• Do a complete servicing before you put the product in storage for a long time.

Disposal
Symbols on the product or the packaging of the product indicate that this product cannot be handled as domestic waste. It must be submitted to an appropriate recycling station for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly, you can help to counteract the potential negative impact on the environment and people that can otherwise result through the incorrect waste management of this product. For more detailed information about recycling this product, contact your municipality, your domestic waste service or the shop from where you purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>