ROGA Instruments MF710 Hemispherical Array for Sound Power User Manual
- June 3, 2024
- ROGA Instruments
Table of Contents
ROGA Instruments MF710 Hemispherical Array for Sound Power
Change History
| Version | Date | Changes | Handle by |
|---|
1.0
| ****
2016.09.01
| ****
Initial version
| Zhang Baojian,
Jason Qiao
| | |
THIS MATERIAL, INCLUDING DOCUMENTATION AND ANY RELATED COMPUTER PROGRAMS, IS PROTECTED BY COPYRIGHT CONTROLLED BY BSWA. ALL RIGHTS ARE RESERVED. COPYING, INCLUDING REPRODUCING, STORING, ADAPTING OR TRANSLATING, ANY OR ALL OF THIS MATERIAL REQUIRES THE PRIOR WRITTEN CONSENT OF BSWA. THIS MATERIAL ALSO CONTAINS CONFIDENTIAL INFORMATION, WHICH MAY NOT BE DISCLOSED TO OTHERS WITHOUT THE PRIOR WRITTEN CONSENT OF BSWA.
Introduction
General Description
MF710 / MF720 are hemispherical array designed by BSWA for sound power
measurement. MF710 meet the requirement of 10 microphone method according to
GB 6882-1986, ISO 3745:1977, GB/T 18313-2001 and ISO 7779:2010. MF720 meet the
requirement of 20 microphone method according to GB/T 6882-2008, ISO
3745:2012.
The MF710 / MF720 were designed as small, light and easy to assemble fixture.
Microphone can be mounting on the hemispherical surface very quickly and
accurately, so that in accordance with the standard requirements for sound
power measurement becomes very easy. BSWA also provide multi-channel data
acquisition device and software to working together with the fixture for sound
power measurement.
Features
- Meet the requirement of GB/T 6882, ISO 3745, GB/T 18313, ISO 7779
- Microphone can be moving along the track to meet the 10 and 20 microphone method
- Various type microphones with 1/2 inches preamplifier could be mount
- It can be fixed on the ground or be hung installation
- Easy to assumable, light weight and compact structure, supplied with professional packing box
- Suitable for sound power measurement in laboratory and outdoor
Spectification
Specification
Type| MF710-XX1| MF720-XX1
Standard
| GB 6882-1986, ISO 3745:1977
GB/T 18313-2001, ISO 7779:2010
| GB/T 6882-2008, ISO 3745:2012
Application| 10 Microphone for Sound Power| 20 Microphone for Sound Power
Microphone| 1/2” Microphone
Radius| Optional: 1m / 1.5m / 2m
Weight (only
hemispherical array)
| -10: 6.8kg / -15: 10.9kg / -20: 17.7kg| -10: 6.8kg / -15: 10.9kg / -20:
17.7kg
Dimension of Packing Box (mm)| -10: W1565 X H165 X D417
-15: W 2266X H165 X D566
-20: W1416 X H225 X D417
Note 1: -XX is the radius of fixture. -10 = radius 1m, -15 = radius 1.5m, -20 = radius 2m
Packing List
| No. | Type | Description |
|---|
Standard
1
| ****
MF710 / MF720
Hemispherical Array for Sound Power
| Hang Unit| 1 pcs.
Central Plate| 1 pcs.
Track| 6 pcs.
Fixing Ring| 6 pcs.
2
| ****
Accessories1
| All included| Screw M10*12| 10 pcs
Radius 1m
| Screw M520| 20 pcs
Screw M610| 4 pcs
Radius 1.5m/2m| ****
Screw M6*20
| ****
20 pcs
Radius 2m
| Screw M5*25 Spring gasket M5
Nut M5
| ****
50 set
All included| Wrench| 1 set
3| User Manual| Operation instruction
4| Packing Box| Suitable for transport
Option
5
| MPA201
1/2“ Microphone
| MF710| 10 pcs.
MF720| 20 pcs.
6
| FC002-X2
Microphone Fixing Connector
| MF710| 10 pcs. Fix microphone on track.
MF720| 20 pcs. Fix microphone on track.
7
| ****
CBB0203
20m BNC Cable
| ****
MF710
| 10 pcs. Connect microphone to data acquisition
MF720
| 20 pcs. Connect microphone to data
acquisition
Note 1: Accessories include socket head wrench and screw. Supplied with several more screws to prevent loss or damage. Screw M5*25, spring gasket M5 and nut M5 are used to assemble track of array with radius 2m.
Note 2: FC002-A used for radius 1m array, FC002-B used for radius 1.5m array, FC002-C used for radius 2m array. The microphone fixing connector cannot be universal.
Note 3: Standard length is 20 meters. Customer can specify the length when ordering.
MF710 recommended with 10-channel data acquisition: MC38102
MF720 recommended with 20-channel data acquisition: MC38200
Software: VA-Lab BASIC + VA-Lab Power
Fixture Assembly
Overall Component
| 1 | Hang Unit |
|---|---|
| 2 | Central Plate |
| 3 | Track |
| 4 | Fixing Ring |
5
| FC002 Microphone
Fixing Connector
6| Microphone
Track Pre-Assembly
Fig.3 MF710-20 / MF720-20 Track Assembly
MF710-20 and MF720-20, which radius is 2 m, need to assemble the curved track
due to it was designed to be composed of two parts. The track of radius 1m and
1.5m cannot separate so it’s no need to pre-assemble.
The way to assemble is find the track marked with the same letter and connects
together with splints and screws.
Track and Central Plate Assembly
Connect track to the central plate as shown in Fig.4 and Fig.5. Insert the track into central plate and using a screw fastening (three screws for each track). The hang unit must be mounting firmly as shown in figure.
Note: The track must be installed in alphabetical order according with letter marked on the head and end of the track.
Note: Hang unit must be mounting firmly enough in order to avoid damage the array while lifting.
Fix Microphone with FC002 Microphone Fixing Connector
Microphone fixing connector installation refers to Fig.6 (all toward the same
direction).
The inner and outer edges of the track are marked with slots to show the
microphone position. The inner edges are slotted as 10 microphone method, and
the outer edges are slotted as 20 microphone method. Each slot of microphone
position has a number sign, and FC002 connector also formed with a
corresponding clip window.
- Align the inner clip window and inner slot, when using 10 microphone method;
- Align the outer clip window and outer slot, when using 20 microphone method.
After determining the FC002 location, tighten the fixing nut.
Inset microphone into the FC002 and tighten the lock nut, and then connect with cables.
Fixing Ring
Assemble the fixing ring according to Fig.8 and laid on the ground. Then insert each end of track into the slot of fixing ring, and fastening nut to fix as shown in Fig.9.
Note: When lift the array with hang unit, the connection between track and fixing ring must be remove. DO NOT lift the array with fixing ring together.
Microphone Position
Hemispherical array support 10 and 20 microphone test method, the microphone
position show in Fig.10 and Fig.11. The microphone position marked as slot on
the inner and outer edge of track with number sign.
Fig.11 Microphone Position of 20 Microphone Method
● Microphone positions on the facing side
〇Microphone positions on the remote side
Microphone Axial Position Adjustment
The axial position of microphone need to be adjusting careful, to ensure the distance between each microphone and device under test can meet the requirement of standard.
The axial position of microphone requirement show as below:
| Type | A | B 1 | C 1 | Remark |
|---|---|---|---|---|
| MF710-10 / MF720-10 | 1000mm | 35mm | 22mm | Radius of 1 meter |
| MF710-15 / MF720-15 | 1500mm | 25mm | 12mm | Radius of 1.5 meter |
| MF710-20 / MF720-20 | 2000mm | 25mm | 16mm | Radius of 2 meter |
Note 1: Where possible, satisfy the distance A as the highest priority. The distance B
and C are for only reference.
Operation Notes
- The measurement microphone is a sensitive component, please use it careful. The environment condition of microphone required must be guaranteed. Store the microphone in the attached box which can protect it against damage from outside.
- Please follow the introduction and using step in the user manual. DO NOT drop, knock or shake the product. Any operation over the limit could damage the product.
Warranty
BSWA can provide warranty service during the warranty period. The component
could be replaced according to the determination of BSWA to solve the issue
caused by materials, design or manufacture.
Please refer to the product warranty promise in sales contract. Do not try to
open or repair the device by customer. Any unauthorized behavior will result
in loss warranty of this product
Customer Service Phone Number
Please do not hesitate to contact us for any issue:
Customer Service
Phone Number:
| +86-10-51285118 (workday 9:00~17:00)
---|---
Sales Service
Phone Number:
| Please visit BSWA website www.bswa-tech.com to find the sales number of your region.
BSWA Technology Co., Ltd.
Room 1003, North Ring Center, No.18 Yumin Road,
Xicheng District, Beijing 100029, China
Tel: 86-10-5128 5118
Fax: 86-10-8225 1626
E-mail: info@bswa-tech.com
URL: www.bswa-tech.com