Zyyini Z8 Bluetooth Headset User Manual
- June 1, 2024
- Zyyini
Table of Contents
Bluetooth headset
Z8 User manual
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Button Instructions and Functions
-
Power On: Take out the earphones from the charging case. The earphones will automatically power on and pair, or long press the touch button for about 3-5 seconds to power on.
-
Power Off: Put the earphones back into the charging case.
They will automatically power off, or long press the touch button for about 3-5 seconds to power off. -
Play/Pause: During playback, single-click the touch button of either earphone to pause playback; during pause, single click to resume playback.
-
Answer/Hang Up Calls: When there is an incoming call, single-click the touch button of either earphone to answer; to end a call, single-click the touch button of either earphone to hang up.
-
Reject Call: When there is an incoming call, long press the touch button of either earphone for 2-3 seconds to reject the call.
-
Double-click to adjust previous/next track.
-
Triple-click to adjust volume.
Pairing and Connection
How to power on and pair the earphones?
- Take out the earphones from the charging case. They will power on automatically and start pairing. Turn on the Bluetooth function on your phone, search for and connect to the earphones. If you encounter issues with single-ear connection or unable to find the device, put both earphones back into the charging case, wait for about 5 seconds, then take them out again and reopen the Bluetooth on your phone to search and reconnect.
Notes for Use
- Do not handle this product violently, or subject it to heavy pressure or high temperature and humidity environments.
- Stay away from Wi-Fi, routers, and other high-frequency transmitting devices as they may interfere with the signal reception of this device, causing audio stuttering and disconnections.
- Please use this product within an effective range of 10-15 meters, without physical obstructions (such as walls) between the Bluetooth device and the earphones.
- When charging, please use a certified charger to charge the charging case of this product.