VUSION Bluetooth LE Owner’s Manual

July 11, 2024
VUSION

VUSION Bluetooth LE

Product Specifications

Product name| Model| Resolution DPI| Display Usable color pages| Battery Type| IP rating
---|---|---|---|---|---
VUSION 1.5| EDB1-0150-A| 200×200| 186 b/w/r 2| Coin Cell (CR2450)| IP53
VUSION 1.6| EDB1-0160-A| 152×152| 140 b/w/r 2| Coin Cell (CR2450)| IP53
VUSION 2.1| EDB1-0210-A| 248×128| 135 b/w/r 2| Coin Cell (CR2450)| IP53

Product Usage Instructions

About ESLs

  • An Electronic Shelf Label (ESL) displays article data and price information.
  • It automatically updates information when there are changes.

Installation Instructions

  • Installation should be done by trained electricians.
  • Follow the mounting instructions provided by the producer.

Environmental Guidelines

  • E-paper displays are moisture and UV-sensitive. Avoid exposure to direct UV sources.
  • Clean the label with a damp cloth using pH-neutral household cleaners.
  • Do not use alcohol, solvents, or abrasive cleaning products.
  • Avoid high humidity combined with low temperature.
  • Do not operate outside the recommended temperature ranges.
  • Different temperatures may impact battery life.

FAQ

  • Q: Can I use aggressive cleaning agents to clean the electronic label?
  • A: No, only use common pH-neutral household cleaners to clean the label. Avoid alcohol, solvents, or abrasive cleaning products as they may alter the product’s appearance and functionality.
  • Q: What should I do if wireless appliance usage is restricted in my building?
  • A: Contact appropriate authorities before installing the VUSION Labels if usage of wireless appliances is restricted in your building.
  • Q: How should I store the ESL when not in use?
  • A: Follow storage and warehousing guidelines to maintain the display quality when the ESL is not in use.

Vusion Group

  • Read all documents and system instructions carefully to minimize the risk of injuring persons and to avoid damage to the system or damage to the environment. Always keep all documents and guidance accessible.
  • If necessary, the content of this document will be updated. You can request the latest version of the document via pdm.hardware@vusion.com.

About ESLs

  • An electronic shelf label is a device that shows article data and price information on its display. In comparison to printed labels, the information is automatically updated if price or article data changes.
  • In this product specification, the focus is set on the product family VUSION Bluetooth LE.
  • With its new Bluetooth LE wireless signal range, it is a new product range, and the line-up has display sizes 1.5”, 1.6”, 2.1”, 2.2”, 2.6”, 4.2”, 6.0”, and 7.4”.

General Key Features

  • Bluetooth LE radio protocol standard
  • Radio coverage: up to 30 meters
  • Bi-directional communication
  • 40 available communication channels and 3 advertisement channels
  • Ultra-low power consumption
  • Full graphical e-Ink display with paper-like readability
  • Super wide viewing angle (nearly 180 degrees)
  • Flexible mounting options are available
  • May be used in landscape and portrait mode
  • Fast response time
  • 128-bit AES encryption
  • Multiple page support with preloading and fast page switching
  • Integrated indirect NFC tag

The installation instructions are intended for trained electricians who can exhibit the following qualifications:

  • Knowledge of the use of tools and work instructions.
  • Knowledge of the usable conditions of the tool.
  • Knowledge of electrical safety instructions.
  • Knowledge of the electrical building regulations.
  • Knowledge of the relevant standards.
  • Knowledge of the assembly schedule.

Overview about VUSION Bluetooth LE labels

Product name| Model| Resolution| DPI| Display colors| Usable pages| Battery Type| IP rating
---|---|---|---|---|---|---|---
VUSION 1.5| EDB1-0150-A| 200×200| 186| b/w/r| 2| Coin Cell (CR2450)| IP53
VUSION 1.6| EDB1-0160-A| 152×152| 140| b/w/r| 2| Coin Cell (CR2450)| IP53
VUSION 2.1| EDB1-0210-A| 248×128| 135| b/w/r| 2| Coin Cell (CR2450)| IP53
VUSION 2.1 WP| EWB1-0210-A| 248×128| 135| b/w/r| 2| Coin Cell (CR2450)| IP68
VUSION 2.2| EDB1-0220-A

EDB1-0220-B

| 212×104| 111| b/w/r| 2| Coin Cell (CR2450)| IP53
VUSION 2.6| EDB1-0260-A| 296×152| 125| b/w/r| 2| Coin Cell (CR2450)| IP53
VUSION 4.2 WP| EWB1-0420-A| 400×300| 120| b/w/r| 2| Coin Cell (CR2450)| IP68
VUSION 6.0| EDB1-0600-A| 600×448| 128| b/w/r| 4| Primary Lithium Battery| IP53
VUSION 7.4| EDB1-0740-A| 480×800| 126| b/w/r| 2| Coin Cell (CR2450)| IP53

General remarks

  • The SES-imagotag VUSION Labels must be installed according to the mounting instructions of the producer.
  • In rare cases, the usage of wireless appliances can be restricted by the building owner (e.g. Airport or Hospital).
  • Please contact the appropriate authorities before installing the SES-image tag VUSION Labels.

Environmental

General

  • E-paper displays are moisture and UV-sensitive. Exposing the E-Tags to direct UV sources should be avoided seeing as those can impact the casing quality as well as image clarity.
  • The absolute rating operating environments describe the boundary conditions for updating the display while the absolute rating (see storage and warehousing) describes the boundary conditions for a display not updating

 |

BWR R2.0

|

BW (Freezer)

---|---|---
Operating temperature|

0° C to +40° C

|

-25°C – 10°C

Cleaning Instructions

  • Clean the electronic label with the help of a damp cloth.
  • Use only common pH-neutral household cleaners and no other aggressive cleaning agents.
  • Do not clean the label with alcohol, solvents, and/or abrasive cleaning products as they can react with the used materials and alter the product’s appearance and functionality.

Note: Do not use liquid or aerosol cleaners and keep it away from water.
Temperature and Humidity Conditions

  • High humidity combined with low temperature is not recommended
  • Overall, an operation outside of the above-given ranges is not covered and hence not recommended to use the ESL outside of this range
  • Temperatures differing room temperature may have an impact on battery lifetime (excl. Freezer)

Storage and warehousing

While displays are rated to perform according to the specifications for the warranty period at the specified absolute operating environment the storage conditions before installation also need to be considered. Testing showed that the storage conditions close to the operation conditions of the E-Paper display performed better than if it is stored outside of the storage conditions mentioned in the table below. Like other moisture and UV-sensitive components, we recommend that our labels be stored in temperature- and humidity-controlled environments, and whenever possible, under below defined “Optimal Storage Conditions”, away from sunlight, to optimize their performance.
It is strongly recommended to observe the following points to ensure the best operation, functioning, and battery lifetime:

Storage temperature and humidity

  BWR **BW**
Storage temperature -20° C to +50° C -20° C to +50° C
Storage humidity 40% – 70% 40% – 70%

Intended Use

  • The VUSION electronic shelf label family is exclusively designed to connect to Access Points of the company SES-imagotag or acknowledged partners via radio.
  • The device may only be used in areas where the environment fulfills the requirements described in the chapter “Environmental”.

Improper use
VusionGroup® shall not be responsible for defects resulting:

  • from use or storage that is harmful to the proper working of the product (e.g. abnormal use, incorrect maintenance and/or storage) and/or non-compliance with the applicable product environment specifications
  • from use of a product that does not comply with the recommendations and specifications of VusionGroup®
  • from use or installation that is not compliant with the applicable functional description, or any other technical specifications provided by VusionGroup®

Please note the following handling instructions, non-compliance is considered improper use:

  • Never open or disassemble the electronic device, only the battery may be replaced by trained users.

  • Don’t use the electronic device if it is defective. If the screen is defective, the ESL shall be replaced.

  • Unauthorized changes or modifications to the electronic device and its components without the consent of VusionGroup® are not allowed.

  • Don’t use the electronic device with spare parts and accessories that are not tested and approved by VusionGroup®.

  • WARNING: Contains lithium pouch or cell batteries

  • NEW AND USED BATTERIES CAN BE HAZARDOUS, KEEP THEM OUT OF REACH OF CHILDREN

  • Swallowing or placing batteries inside any part of the body may lead to severe or fatal injuries within 2 hours, due to chemical burns and potential perforation of the esophagus.

  • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

  • CAUTION: The battery used in this device may present a risk of fire or chemical burn hazard if mistreated. Do not recharge, short-circuit, disassemble, heat above 100°C (212°F), incinerate or bend the battery.

  • Do not use labels above the lifetime/usage information (Display updates,

  • LED usage, etc.) which was committed by contracts or given per datasheet.

  • Do not use labels out of specification/datasheet, e.g., use in ESL in freezer area which – per datasheet – are not designed for such environment.

  • Please handle the ESL carefully.

  • Prevent damage by water and intrusion of liquids into the label. Direct contact to water shall be prevented if the ESL is not declared as IP68.

  • Don’t drop the label to the floor. If an ESL is dropped, check whether the label is still working or has any visible damage.

  • Apply as little pressure as possible when inserting the ESL into the rail or when moving in the rail. Apply pressure only on the edge of the screen and at the level of the battery compartment, not on the screen itself. If the ESL is equipped with Easylock, only remove the ESLs from the rail with the provided tool for this purpose.

  • Strictly avoid direct contact with groceries.

  • Do not use harsh detergents containing alcohol or abrasive additives to clean the ESL

  • We assume no liability for stolen labels.

  • Keep the product and its batteries away from children.

  • Examine devices and make sure the battery compartment is correctly closed. Do not use the product if the compartment is not secure.

  • Don’t throw the batteries into the garbage. Give them to a recycling company or contact VusionGroup® for handling advice.

  • Don’t throw the electronic device into the garbage. Give them to a recycling company or contact VusionGroup® for handling advice.

  • Preferably transport all ESLs upright like in the original packaging. Never transport loosely packed labels

FCC STATEMENT

Certificates

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION TO USERS
Changes or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate the equipment.

FCC rules apply to the following products: VUSION 1.5 (EDB1-0150-A); VUSION 1.6 (EDB1-0160-A); VUSION 2.1 (EDB1-0210-A); VUSION 2.1 WP (EWB1-0210-A);
VUSION 2.2 (EDB1-0220-A, EDB1-0220-B); VUSION 2.6 (EDB1-0260-A); VUSION 4.2 WP (EWB1-0420-A); VUSION 6.0 (EDB1-0600-A); VUSION 7.4 (EDB1-0740-A)

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC standards apply to the following products: VUSION 1.5 (EDB1-0150-A); VUSION 1.6 (EDB1-0160-A); VUSION 2.1 (EDB1-0210-A); VUSION 2.1 WP (EWB1-

0210-A); VUSION 2.2 (EDB1-0220-A, EDB1-0220-B); VUSION 2.6 (EDB1-0260-A); VUSION 4.2 WP (EWB1-0420-A); VUSION 7.4 (EDB1-0740-A)

CONTACT

  • VusionGroup GmbH I Kalsdorfer Straße 12 I A-8072 Fernitz-Mellach – AUSTRIA
  • CR: FN350927w I Commercial court: Graz I UID : ATU65936017
  • T. +43 (0) 5 94604-00 I E. office.at@vusion.com I www.vusion.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals