HAVIT TW980 Open-Ear Clip Headphones User Manual

TW980
OPEN-EAR CLIP HEADPHONES.
USER MANUAL

Product and accessories

Production structure

1. Muli-function button(MFB)
2. Speaker
3. Power LED indicator
4. Reset button
5. Charging port

Wearing

Take out the clip-on earphone and clip it on your ear then adjust it up and down untilyou think you can enjoy the perfect sound qualiy position.

Basic functions

01 Power on, Bluetooth connection
Follow the steps(Please make sure that your phone supports Bluetooth connections)

1. Power on: Open the charging case and the  earbuds will turn on automatically.The earbuds enter the pairing mode automatically while the charging case LED indicator flashes alternately with white and orange light.
2. Activate the phone’s Bluetooth-connection function and search for “HAVIT OpenBuds 17 referring to your phone instructions.Click “HAVIT OpenBuds 1” to connect.
3. The earbuds can automatically reconnect with the last device that you had paired “HAVIT OpenBuds 1″ will disconnect when leaving the working range of Bluetooth. The earbuds will reconnect automatically if you come back to the range in 3 minutes.

02 Power off
Put the earbuds into the charging case and close the lid of case, they will automatically shutof.
03 Answer incoming call
Double tap the left or right MFB to answer  incoming call.
04 End the call
Double tap the left or right MFB to end the current call
05 Decline incoming call
Long press left or right MFB for 1s to reject a call
06 Activate the voice assistant
Both earbuds work: Triple tap the left MFB to activate voice assistan.
Single earbud works: Triple tap the MFB of working earbud.
07 Switch on/Switch off game mode
Triple tap the right MFB to switch on/switch off game mode.
08 Music control

1. Play/Pause: Double tap the left or right MFB.
2. Previous song:Long press the left MFB for 1s.
3. Next song: Long press the right MFB for 1s.

Note: If only one earbud works, long press the MFB of working earbud for 15 to switch to next song.
09 Charging Case
Charge the case using the Type-C cable connected to a computer or wall harger. When the case is charging, the orange light of the case flashes in a breathing pattern, and turns off after fully charged.
Earbuds.
The earbuds make a warning tone to warm low power.Put the earbuds to the case to charge.
10 Mono mode (take out any earbuds as a unilateral Bluetooth earbud)
(Note: single channel mode only needs to remove one earbud from the charging case; If two earbuds are removed before connection, the earbud will be used in TWS mode by default, and the TWS connection will be automatically realized.)

1. Take out one earbud from the charging case,the earbud automatically turns on and reconnects to previous connected devices.

2. Switch from one earbud to the other earbud when playing music, taking out the other earbud from the charging case and these two earbuds will connected automatically.
   Both earbuds will play music automatically and then put the earbud which do not need anymore into the charging case and the switching process completes. (note: Call mode is applicable)

3. Please refer to the TWS mode for more functions.

11 Restore factory settings
If the earbuds can’t pair frequently, please restore the factory settings. Put both of the earbuds into charging case and close the cover.Open the case again,within 3 minutes, long press the charging case reset bution for 5 seconds,the indicator of the case flashes alternately with white and orange light the ‘arbuds will enter the pairing mode again,search the “HAVIT OpenBuds 1” Bluetooth paiting name with the mobile phone and connect again.
12 Dual device connection
‘The earbuds support connecting two device simultaneously.

1. In dual connection mode, when phone A is clicked to play a song, phone B will automatically stop playing
2. If there is an incoming callfrom phone B while phone A s playing in dual connection mode, the earbuds won’t display an incoming call prompt. Single tap the left or right MFB to answer phone B’s incoming call. Phone A’s song playing status will be restored automatically once the call from phone B ends.
3. If there is an incoming callfrom phone A while phone B is calling in dual connection mode, the earphones won’t display an incoming call prompt. Long press left or fight MFB can reject phone B’s call

Specifications:

Product Name: OPEN-EAR CLIP HEADPHONES
Model No.: TW980
Bluetooth Version: V5.3
Bluetooth Working Range: 10M(without obstacles)
Earbuds Batlery: 40mAh”2
Charging Case Battery: 400mAh
Play Time: 6.5h (60% Vol.)
Case Charging Time: about 2h
Speaker Size: ®12mm
USB Port: USB-C

Note:
Up to 6.5 hours of playtime depends on playback device,contents and usage.
Warnings

1. Please follow the instruction to operate.
2. Please charge the earbuds with input power below 5V/1A, in order to protect the batery.
3. Please store or use the earbuds in a normal temperature environment.
4. Please do ot use this product near the water. Do not immerse this product in any liquid or splash any liquid on this product
5. Please keep the earbuds from heat source, such as radiators, hot air regulators, stoves, or other heal genérating instruments. As tis not anti high temperature.
6. Don’t jam the ports of the earbuds, such as charger port, LED port and microphone ete.
7. In order to protect your hearing and extend the speaker service lffe, i s not recommended to adjust the volume to the maximum level for a long time.
8. Whatever reasons damage the earbuds, please foel free to contact our after-sales staff in time rather than repair by yourself. Otherwise, you will accept without after-sales service.

FCC ID:2AI61-TW980 -1

FCC Warning

‘This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause. harmful interference, and (2) this device must accept any interference received. including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
‘This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC.
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This ‘equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful inerference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmiul interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circut different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement The device can be used in portable exposure condition without restriction.

wwwhavitsmart.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>