Shenzhen Xincheng Times Technology Co Ltd 2BBGKCRUISERPRO CRUISER PRO Electric Scooter Instructions
- June 1, 2024
- Shenzhen Xincheng Times Technology Co Ltd
Table of Contents
Shenzhen Xincheng Times Technology Co Ltd 2BBGKCRUISERPRO CRUISER PRO
Electric Scooter
Product Specifications:
- Max Speed: 15 mph
- Battery Life: Up to 15 miles per charge
- Weight Capacity: 220 lbs
- Charging Time: 4-6 hours
Product Usage Instructions
Riding Basics:
- Always wear a helmet, elbow pads, and knee pads for safety.
- Turn on the power and check the battery level indicator.
- Stand with one foot on the deck and the other foot on the ground. Push yourself forward with the foot on the ground.
- Once the scooter starts moving, place both feet on the deck and use the accelerator. The accelerator activates once the speed exceeds 3 mph.
- To brake, release the accelerator for the kinetic energy recovery system (KERS) to slow down automatically. For a sudden stop, squeeze the brake lever.
- When turning, lean your body in the steering direction and gradually turn the handlebar.
Riding Notice:
- Avoid riding in heavy rain as it may affect the scooter’s performance.
- Maintain a medium or low speed (around 5 mph) when encountering speed bumps, door sills, or bumpy roads. Bend your knees slightly to absorb shocks.
- Be cautious of doors, elevators, and overhead obstacles while riding.
- Do not accelerate when going downhill to maintain control.
- Avoid pressing the accelerator when walking with the scooter to prevent accidental acceleration.
- Always watch out for obstacles and steer clear of them for a safe ride.
Riding Basics
Wear a helmet, elbow pads, and knee pads in case of falls and injuries either you are a beginner learning to ride or you are a seasoned rider.
- Turn the power on and check the battery level indicator.
- Stand with one foot on the deck and the other foot on the ground. Scoot yourself forward with the foot on the ground.
- When the scooter starts to move forward, put both feet on the deck and apply the accelerator. (The accelerator initiates once the speed exceeds 3 mph.)
- Release the accelerator and the kinetic energy recovery system (KERS) initiates automatically to brake slowly; And squeeze the brake lever for a sudden brake.
- Tilt your body to the steering direction as you turn, and slowly turn the handlebar.
Riding Notice
Do not ride in heavy rain.
Please keep a medium or low speed (5 mph) when you ride through speed bumps, door sills, bumpy roads, or other uneven surfaces. Slightly bend your knees to brace yourself for the above surfaces.
Look out for doors, elevators, and other overhead obstacles.
Do not accelerate when you go downhill.
Do not press the accelerator when you’re walking the scooter.
Always steer clear of obstacles.
Frequently Asked Questions (FAQ)
How do I know when to recharge the battery?
Keep an eye on the battery level indicator. When it shows a low charge, it's time to recharge the scooter.
Can I ride the scooter in wet conditions?
It is not recommended to ride in heavy rain as it can affect the scooter's performance and safety.
What should I do if the scooter doesn't start moving?
Check the battery level first. If it's sufficient, ensure both feet are placed correctly on the deck before applying the accelerator.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>