LINGDIAN LD-A01 Remote Control Instructions
- June 1, 2024
- LINGDIAN
Table of Contents
LINGDIAN LD-A01 Remote Control
Product Specifications
- Power Light
- Negative ion
- Swing
- Germicidal lamp
- Brightness adjustment
- Color temperature
- Fan gear
- Fan shutdown scene
Product Usage Instructions
Power On/Off
To power on the device, press the Power Light button. Press the same button
again to power off the device.
Negative Ion
Activate the negative ion feature by selecting the corresponding option on
the remote control.
Germicidal Lamp
The germicidal lamp function can be activated for sterilization purposes.
Use caution when operating this feature.
Brightness Adjustment and Color Temperature
You can adjust the brightness and color temperature settings using the
remote control. Choose the desired levels for optimal lighting.
Fan Settings
You can adjust the fan gear and shutdown scene settings based on your
preference using the remote control.
Remote Control Parameters
- Operating Temperature: -5-40°C
- Dimension: 1464316 mm
- Working Voltage: AAA-3V
- Standby Current: 2uA
- Operating Frequency: 2.4M Hz
- Transmitting Distance: >30M
Caution: Any modifications not approved by the manufacturer may void the warranty.
Frequently Asked Questions (FAQ)
-
Q: How do I change the color temperature settings?
A: Use the remote control to adjust the color temperature to your desired level. -
Q: Can I activate multiple functions simultaneously?
A: Yes, you can typically activate multiple functions at the same time, but refer to the user manual for any specific limitations.
- Power
- Light power
- negative ion
- Germicidal lamp
- swing
- Fan gear
- Fan shutdown
- scene
- Color temperature
- Brightness adjustment
- delayed
- AAA-3V
| Remote control parameters | Operation temperature | -5℃-40℃ |
|---|---|---|
| Dimension | 1464316 | |
| working voltage | AAA-3V | Standby current |
| Operating Frequency | 2.4M Hz | Transmitting distance |
Kind reminder
When the transmitter cannot remotely control the receiver, please check
whether the switch battery contacts are normal, whether the positive and
negative poles are placed correctly, and whether the battery level is
sufficient (if the signal light is dim; please replace the battery, both
batteries must be of the same brand).
- When the transmitter cannot remotely control the receiver, please check if there are remote control products of the same frequency in the nearby area, and check if their transmitter buttons are pressed because transmitting remote control products of the same frequency at the same time can cause interference, affecting the effect of receiving incorrect commands. If the remote control function is ruled out, it will return to normal.
- Please do not place this product within the reach of children when using it
- This product has a fan power-off memory function, which automatically turns on the direction of the previous fan next time.
- Code learning operation: Within 1 minute of powering on, hold down “1H” and the light will flash, indicating successful code matching.
- When the remote control cannot be effectively controlled: Please check the battery. If it is not used for a long time, please remove the battery.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference e to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>