Haier HTW65-187 Series Semi Automatic Washing Machine With Toughened Glass User Manual

Haier HTW65-187 Series Semi Automatic Washing Machine With Toughened

Glass

Product Specifications

• Model Series: HTW90-186 and HTW85-178
• Programs: Various programs available based on models
• Cycle Time: Ranges from 9 to 20 minutes depending on the program

Product Usage Instructions

HTW90-178/186 Series FL
Program: 12
Process: Sp_in, Rinse 3, Spin 2+2
HTW75-178BK, HTW75-178, HTW75-1169, HTW75-178BBK
Program: 10
Process: 1+1, Spin, Rinse, Spin

Frequently Asked Questions (FAQ)

1. Q: How do I select the program on my washing machine?
   A: Use the program selector knob to choose the desired program number corresponding to the user manual.

2. Q: What is the recommended detergent for these models?
   A: It is recommended to use high-efficiency (HE) detergent for optimal performance.

BRAND INTRODUCTION
HaierGroup
Established in 1984, Haier Group is a world-leading provider of solutions to beautiful life. Haier has topped Euromonitor’s World Home Appliance Brands and its subsidiary Haier Smart Home Co., Ltd. is among the Fortune Global 500 Companies.
Thank you for purchasing Haier product.

NAME OF PARTS

Reference Machine Snap for all SA Model
Notes: All illustrations in this manual are given for reference only. Your products and accessories may show differences from these illustrations due to our continuous improvement.

MEANING AND DESCRIPTION OF THE SYMBOLS

Warning sign
Contents marked with that symbol are ‘ related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or endanger the personal safety of the user.

Forbidding sign
Contents marked with that symbol are actions forbidden to perform. Performing of those actions may result in damage of the machine or endanger the personal safety of the user.

• Please check if the power receptacle has good earthing condition before using to guarantee your safety.

SAFETY PRECAUTION

• Please insert the power cord into special receptacle with rated voltage. Be sure to use singlephase three pins receptacle.
• The earthing terminal of the receptacle must be earthed reliably. If possible, please adopt electric leakage protector.
• When the machine is being used normally, please put the power plug at the location easily to be inserted and extracted by hand.
• Be sure to pull the plug off when there’s power failure, or the machine is being moved, cleaned or when it is idle.
• If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean.
• Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel.

Do not use water hotter than 5o°c.

In case the washing machine is installed on ground with carpet, do not block the ventilation holes with carpet.

In case the washing machine is installed on ground with carpet, do not block the ventilation holes with carpet.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

*Motor used in machine is having Thermal Overload protection. So, in case of excessive heating, motor might trip and stop for cooling. In such case, it is suggested to wait till the temperature goes down before starting. Do not put hands into the running machine . It is dangerous even if the rotation is slow. Take special care of children

Do not decompose, repair or alter the machine by yourself.

Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine.

Do not wash laundries with volatile materials (such as thinner, petrol etc.).

Handicapped or children shall use the machine in close supervision.

Keep the machine away from direct sunlight and heat source like heater.

• Please put down the drain hose before washing, and connect the water inlet pipe properly.

• It is suggested to use foamless washing powder.

• Please don’t use the washer in the environment below 0°C If the washer is below 0°C, the washer’s water inlet system and draining system will be frozen, that will damage the whole machine. If the washer has below 0°C, please ensure that the washer is placed under the room temperature for 2-4 hours before using.

• To protect your laundry and washing machine, please take out all coins, buttons, keys hairpins and other foreign materials from the clothes before washing.

• Objects left in the pockets may damage clothing or cause the drain hose to clog.

• After washing put bucket of clean water in wash side and rotate drain selector 4-6 times when draining. By doing so any obstructed foreign particle will drain off.

• Do not store waler in tub for long time. Immediately empty the tub after washing. And be sure the drain pipe not bend

INSTALLATION AND ADJUSTMENT
Please install and adjust the machine according to the requirement of the manual. It is very important for your safety and for operating the machine correctly.

USAGE OF DRAIN HOSE

The drainage shall be smooth with the drain hose.

1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth enough and cause incomplete drainage.
2. Do not tramp or press the drain hose.
3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly.
4. If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not be less than 30mm, and the length shall not exceed 1.5m.
5. If the extra hose is too long, cut it either at point A or B.

How to change the direction of the drain hose

• Figure 1 indicates the ex factory installation position of the drain hose.

• Extend the drain hose from the side of spin tub Take off the drain hose from the hanging hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. (As per figure 2)
• Rotate the drain hose fixing hook for 90° to take it out from the installation hole (As per Figure 3)

• Install the two drain hose fixing hooks m taken out into the installation hole at the other side of the base frame (to aim at the installation hole accurately you can lean the washing machine forward slightly).
• Then rotate for 90°(As per Figure 4).
• Pull the fixing hook outwards slightly.
• Inlay the drain hose into the fixing hooks Figure 3 V reliably along the groove at spin tub side, and make it extend towards spin tub side.
• Then hang the drain hose into the hanging hole at the spin tub side. (As per Figure 5).

Extend the drain hose from the rear side

• Take out the drain hose from the fixing hook. Extend it from the near side (When) the drain hose is extended from the rear side, it can be hung on the point for drain hose at the two sides of the cabinet.) (See to Figure 6).

Install the water inlet hose; Select the water level

• Insert the water inlet hose into the Water inlet on the control panel directly (pull it out to dismantle it)
• Fill the water according to the quantity of the laundries.
• Set the water level adjusting lever to needed line. *
• Water Level Selector available in Selected Models only.

Water level Indicator applicable for below series
HTWBS-187Series, HlW90-1159. HTW100-11a Series HTW90-1128, HTW95-178, HTW95-186S

PREPARATION BEFORE WASHING

Preparation before washing:

1. Connect the water inlet hose.
2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.
3. Put down the drain hose.
4. lnstall the washing machine on the horizontal surface for proper working. Failing to do so may result into vibrations and abnormal noise.

Pay attention to followings before washing the laundries

Check if the laundries has any special requirement for washing. (fabric should be marked machine wash)
Check if the laundries has any special requirement for washing. (fabric should be marked machine wash)

Tie the long strips; fasten the buttons; close zippers.

The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub.

When the pulsator is running, the buttons of the laundries may cause noise. For the sake of discretion, please wash the laundries with buttons separately (along with laundry washing bag).

• Check if the laundries are applicable for washing in machine.
• Divide the laundries that are not colorfast from other laundries.
• Soak those laundries which absorb water with difficulty, by hand.
• For those laundries with heavy soil, please first remove the dirt like mud or dust. for the parts with heavy soil, please apply detergent on them in advance, which can make it easier to remove the soil.
• For those laundries that may get lint ball and those with long fur, turn it over before putting in machine.
• Do not put the laundries polluted by chemicals into the washing machine directly.

THE MUST IN WASHING

• The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundry quantity in one washing cycle shall be lower than the rated capacity.
• The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing.
• Do not select “Maximum” water level for laundries less than 1.0kg, so as to avoid splashing of water.

USAGE OF THE DETERGENT

How to use the washing powder

• Direct dissolve in washing machine:
  1. Fill small quantity of water.
  2. Put washing powder, run for 30 seconds to dissolve it completely.
  3. Put in the laundries. Select suitable water level.
• The instant dissolving of the washing powder.
  1. Prepare warm water of 30°C and a container.
  2. Add the powder while stirring to fully dissolve it.
• The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity.
• Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage.

How to use the whitener

• Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub.
• Avoid using whitener on laundries with color or pattern as they are prone to lose color.
• The whitener shall not touch the laundries directly.
• For powder whitener, please dissolve it before using.

WASHING SEQUENCE

WASH PROCEDURE

Wash

1. Water fill selection (a) Set fill selection to ‘Wash side’. (Figure 1)(b) Adjust the water level as per the marked instructions.
2. Fill water and add disolved powder detergent until water reaches a suitable level. (Figure 2) Begin to wash to dispense detergent uniformly.
3. Put in the wash load, and supplement water as necessary.
4. Wash selector knob Select the washing program according to the laundries. (Figure 3)
5. Select the washing time Select the washing time according to the laundries. (Figure 4)
6. After washing, the buzzer will ring. (As per selected models) Set the “WASH SELECTOR” at “DRAIN”. (Figure 5)

Note- Drain operation is separate from wash selector, in selected models only.

MIDWAY SPINNING

Midway spinning

1. Put the laundries into the spin tub evenly and smoothly.
2. Spin
   • Put the Spinner Cap in properly. Please put in the Spinner Cap properly even if the laundries quantity is small.
   • (b) Close the inner and outer cover of the spin tub.
   • (c) Spin for 1-2 minutes.
3. Run the foam-removing spinning.
   • Open the outer cover of the spin tub.
   • Set the water-filling selector control rod at the “SPIN” side. Fill water for about 1 minute. If the water quantity filled is too large, the water may flow out from the wash tub side. Please twist the water tab to limit the water filling.

• * Close the outer cover of the spin tub. Spin for 1-2 minutes.

RINSING

Rinsing
Rinse with water-filling

1. Put the laundries into the wash tub. Select suitable wash program according to the laundries.

2. Adjust the water level
   Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously.

3. Rinse
   Adjust the wash timer to 5-7 minutes to do rinsing.
   (Repeat the midway spinning and rinsing with stored water for 2-3 times)

Rinse with stored water

1. Put the laundries into the wash tub. Select suitable wash speed according to the laundries.
2. Fill water to preset water level.
3. Rinse

Adjust the wash timer to 2-3 minutes to do rinsing.

• When the laundries quantity is a few, please use “Standard” Nash program. If you use “Strong” Wash program, it may splash.

SPINING

Spinning

1. Install the machine on flat and rigid surface only.
2. Do not keep wet clothes on panel. Water may enter electrical parts and can create electric shock. Make sure of earth connecting before using washing machine
3. Put the laundries into the spin tub evenly and smoothly.
4. Press the spinner cap in the tub properly. Close the inner and outer cover of the spin tub.
5. Turn off water supply before spin time selection. Select suitable spin time according to the laundries and do spinning
6. Do not put your hand in spin dryer until it have completely stopped.
7. During Spinning, if there is abnormal sound, it is generally due to slanting placement of the laundries. Please stop the machine & re- order the laundries. Open the lid and put laundry one by one in spin tub and put spinner cap on laundry.

In Spinning, it will pause the work if you open the outer cover of spin tub. Close it to resume to spinning.

DISPOSAL AFTER WASHING

• After using the machine, please clean the lint and foreign materials of the lint filter and over flow filter in time. Otherwise it may result in lint deposition on washed clothes.
• Please first pull off the power plug from the receptacle before cleaning.

CLEANING THE LINT & MAGIC FILTER

Cleaning the lint & Magic Filter
It must be cleaned in time after each using.

Take off the lint filter
Put hand at the indicated position. Push down to take it off. (See to Figure

Pull the lower end of lint filter rear cover outward to disassemble it from the lint filter front cover. Remove lint completely with clear water. Magic Filter Models:- Clean the lint
Put it in water and clean while it is still wet. (See to Figure 2)

Install the lint filter
After cleaning, insert the bottom of the lint filter (marked with”down side”) into the overflow filter. then push the upper part of the filter in (marked with “up side”). (See to Figure 3)

CLEANING THE OVER FLOW FILTER

• Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it regularly.
• Take off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off.
• For fixing overflow filter, first align overflow filter from opposite side of elastic fixing claw, and then press elastic fixing claw to fix overflow filter properly.

Cleaning the overflow filter

1. Pull overflow filter outside for cleaning.

2. Take off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter (as indicated in Figure1)

3. Cleaning the overflow filter.
   Clean the lint around the filter and surrounding visible area, flush with tap water.

4. Install the overflow filter.

   • Install the corrugation pipe.
   • Insert the mounting plate at the bottom of the filter into the valve cover.
   • Hang up the hook at the left upper side.
   • Push the upper part in as indicated in Figure 2.

Disposal of the complete unit

• Wipe the complete unit with soft cloth twisted dry.

• Wipe with neutral detergent if too dirty.

• Do not wash it directly by water.

• After washing, dismount the water inlet hose.

• Do not store water in the tub for long period. Discharge the water immediately after each using.

• Pull off the power plug and hang up the power cord.

• Hang up the drain hose.

• Wipe off the water drops on the surface and inside the tub with clean soft cloth.

• Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them.

TROUBLE-SHOOTING GUIDE

If the laundries fall to the outer side of the spin tub If the laundries fall to the outer side of the spin tub, please take them out immediately.

When the remained water is frozen

• Prevent the freezing(be sure to discharge the water completely after using)
• After complete draining, set the ” WASH SELECTOR” at “STRONG” or “STANDARD”. If it is set at “DRAIN”, it will be rather difficult for the frozen water to melt.
• When the water is frozen Pour hot water below 50°C into the wash tub to soak it completely. Then turn the pulsator with hands gently. Please confirm the drainage can work normally before next using.

ENERGY SAVING GUIDE

To enter into the Energy Saving Mode follow below guide:

1. Select Standard on WASH SELECTOR Knob.
2. Put the Water Level Selector to Maximum Level until water flow
3. Follow bene time for obtaining Energy Saving Mode.

For Models:

Program|
Process| | Spin
_| Rinse| Spin
Cycle Time| 12| | 3| 2+2
For Models:  HTW75-178BK, HTW75-178, HTW75-1169, HTW75-178BBK
Program|
Process| | Spin| Rinse| Spin
Cycle Time| 10| 1+1| 2| 3+3
For Models:  HTW70-178N, HTW70-178BKN, HTW70-178FWN, HTW70-178BKN
Program|
Process| | Spin

_

| Rinse| Spin
Cycle Time| 9| | 2| 6+6
For Models:  HTW75-1169FW, HTW75-1169FL

Program|
Process| | Spin
_| Rinse| Spin
Cycle Time| 15| | 2| 5+5
For Models:
HTW110- 178LBK

Program|
Process| | Spin
| Rinse| Spin
Cycle Time| 15| | 4| 5+5
For Models:| HTW90-1159,  HTW90-1159FL
---|---
Program|
Process| | Spin
| Rinse| Spin
Cycle Time| 15| | 5| 5+5
For Models:
HTW85-178BBK HTW85-186, HTW85-186BBK, HTW85 178BKN, HTW90-178, HTW90-186, HTW85-178FL HTW85-178PBK

Program|
Process| | Spin| Rinse| Spin
Cycle Time| 15| 2+2| 5| 3+3
For Models:  HTW85-178, HTW85-186S, HTW85-178BK, HTW85-178FW,

Program|
Process| | Spin
| Rinse| Spin
Cycle Time| 20| | 4| 3+3
For Models:| HTW95-178, HTW95-186S, HTW95-178FW
---|---
Program|
Process| | Spin
| Rinse| Spin
Cycle Time| 20| | 4| 5+5
For Models:

Program|
Process| | Spin
_| Rinse| Spin
Cycle Time| 20| | 5| 5+5

NOTE

• Under test conditions, When tested accordance with standards IEC 60456: 2010 & BEE schedule 12 (Revision-3)
• Actual Performance of machine will depend on how the appliance is being used.
• For best washing result we recommend to mix the detergent powder in warm water and pour directly into the tub before putting the clothes. (Rated Capacity Load) (If there’s breakdown, please pull off the power plug before checking.) The following phenomena are not breakdown sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.

PACKING LIST

SPECIFICATION

E-WASTE GUIDELINE FOR HAIER INDIA

What is E-Waste or Electronic Waste?
Electronic waste e-waste is a term which refers to unusable, discarded and old, electric & electronic appliances such as refrigerators, LED/LCD/CTV, microwave oven, washing machines, home air conditioner, etc. As per E-waste (Management and Handling) Rules, 2016 e-waste ‘e-waste’ means electrical and electronic equipment, whole or in part discarded as waste by the consumer or bulk consumer as well as rejects from manufacturing, refurbishment and repair processes has been categorized into three main categories, i.e., Consumer Electronics/Home appliances and IT & Telecom. Refrigerators, washing machines, home air conditioner LED/LCD, etc. represents Consumer Electronics /home appliances. On the other hand computers, desktop, laptop mobile phones, etc. and its component represents Telecom & IT. E-waste broadly covers waste from all electronic and electrical appliances and contains different hazardous materials which are harmful to human health and the environment if not disposed of carefully. While some naturally occurring substances are harmless in nature, their use in the manufacture of electronic equipment often results in compounds which are hazardous for example chromium becomes chromium VI. Thus Ministry of Environment, Forest & Climate Change, Govt. of India had listed issued directions for the reduction in the use of hazardous substances in the manufacture of electrical and electronic equipment and their components or consumables or parts or spares. The Ministry of Environment, Forest & Climate Change, Govt. of India in furtherance of its effort to reduce the hazard occurring from rapid growth in the Consumer durable and IT-Telecom market had made rules called as E-Waste (Management and Handling) Rules, 2016 under Environment Protection Act.

HAZARDS OF IMPROPER HANDLING AND/OR IMPROPER RECYCLING OF ELECTRONIC WASTE
Electronic equipment contains many hazardous metallic contaminants such as lead, cadmium, and beryllium and brominated flame-retardants. An improper handling and/or improper recycling of the Electronic Waste results in these hazardous metals/substances getting released into our eco and biological system, thereby leading to various health hazards.

The Hazardous contents in the electronic equipment include:
Health:- The informal method of recycling extended health hazards. For example, primary and secondary exposure to toxic metals, such as lead, results generally from open-air burning used to retrieve valuable components such as gold. Incineration from burning e-waste creates fine particulate matter, which is linked to pulmonary and cardiovascular disease.
Environment: – The informal method of recycling extended environment hazards too. For example when different e-waste is burnt to extract metals from it, toxic chemicals are released into the air, damaging the atmosphere.
• Lead • Brominated Flame Retardants • Chromium • Mercury • Beryllium • Cadmium • Barium • Carbon Black • Phosphor

Without safe recycling, most of these toxic components will end in land fill- poisioning soil and water.

The Dos of Electronic Waste Recycling:

1. Give the discarded Electronic Equipments only at the authorized collection centres so that the same can be properly recycled
2. Drop the discarded Electronic Equipments only in the bins meant for the Electronic Waste
3. Consult the authorized service centre as to whether the Electronic Equipment can be repaired or not, before discarding the same
4. Tell your neighbours and other persons about the hazards of improper disposal or handling or improper recycling of the Electronic Waste
5. If the unwanted Electronic Equipment still work or can be repaired then consider donating them

The Don’ts of Electronic Waste Recycling:

1. Don’t dump the discarded Electronic Equipment in open or in any Land Fill Site as the same will result in contaminating the Soil and the groundwater
2. Don’t dispose of the discarded Electronic Equipment in household bins or Municipal Bins
3. Don’t sell or give your discarded Electronic Equipment to any Trash Dealer or Kabadiwala
4. Recycling Electronic equipment helps to save natural finite resources and also reduces the environmental and health risks associated with improper handling/disposing of the Electronic Waste
5. To minimize our impact on the earth and to protect the environment for future generations return your discarded Electronic Equipment here for safe recycling:

Why proper handling and management of e-waste is required?
According to MoEF, the electrical and electronic equipment (EEE) have valuable materials and hazardous/toxics substances in their components. The electronic products and electrical equipment after their useful life may not cause any harm if it is stored safely in households/stores. However, if the E-waste is opened-up and attempts are made for the retrieval of useful components or material in an unscientific manner or if the material is disposed of in open, then it may cause health risks and damage to the environment. E-waste can be considered as a resource that contains useful material of economic benefit for recovery of plastics, iron, glass, aluminum, copper and precious metals such as silver, gold, platinum, and palladium and lead, cadmium, mercury, etc. However, at the same time presence of heavy metals (As, Cd, Hg, Pb, etc.) and other toxic substances such as polychlorinated biphenyls (PCBs), etched chemicals, etc. may pose risk to health and environment during handling and recovery operations. E-waste is a problem of increasing proportions especially when crude methods are adopted for the recovery of useful components from E-waste. Thus, there is a need to encourage the recycling of all useful and valuable material from e-waste so as to conserve the ever depleting natural resources. The electronic component is increasinaly made from recvcled materials. for examole for makina new LCDs. more than 50% of indium is sourced by recycling used LCDs. The E-waste thus presents a scenario of urban mining for recovery of ferrous/non-ferrous/ rare earth metal and precious metal in addition to plastics and glass. However, the presence of hazardous and toxic substances in the component of e-waste necessitates environmentally sound management of e-waste including collection and recycling/treatment in an environmentally sound manner.

Management and Effect on sustainable future:-
Sustainable development as defined by Brundtland Commission is “development that meets the needs of the present without compromising the ability of future generations to meet their own needs. The e-waste since a long time had been seen as an easy and cheapest source of metals. However, due to the lack of proper consideration for such a source of metals as well as proper methods of recycling in India, we sent our e-waste to the improper channel and thereby participated in degrading the environment. Moreover, through this improper method of extraction of metals we till date had wasted at least forty percent of the precious metals and simultaneously caused damage to our environment. If we opt the proper way to extract metals through proper channels of recycling then we can achieve Ninety percent of the extraction rate of our metals as well as a better way to save our environment. However, if way filenging sof oue matrial to the improper channel we will not think about our sustainable future then it is for sure that the coming generations will be facing crisis of the metals.

Customer/end-user responsibility

1. Consumers shall ensure that their end of life product/e-waste is channelized through collection center or dealer of the authorized producer or dismantler or recycler or through the designated take-back service provider of the producer to authorized dismantler or recycler; |
2. Consumers shall ensure that such end-of-life electrical and electronic equipment are not admixed with e-waste containing radioactive material;

Bulk Consumer Responsibility:-

1. Bulk consumers of electrical and electronic equipment shall ensure that e-waste generated by them is channelized through collection center or dealer of authorized producer or dismantler or recycler or through the designated take-back service provider of the producer to authorized dismantler or recycler;
2. Bulk consumers of electrical and electronic equipment shall ensure that such end-of-life electrical and electronic equipment are not admixed with e-waste containing radioactive material as covered under the provisions of the Atomic Energy Act, 1962 (33 of 1962) and rules made thereunder;
3. Bulk consumers of electrical and electronic equipment listed in Schedule I shall maintain records of e-waste generated by them in Form-2 and make such records available for scrutiny by the concerned State Pollution Control Board;
4. Bulk consumers of electrical and electronic equipment listed in Schedule I shall file annual returns in Form-3, to the concerned State Pollution Control Board on or before the 30th day of June following the financial year to which that return relates;
5. In case of the bulk consumer with multiple offices in a State, one annual return combining information from all the offices shall be filed to the concerned State
6. Pollution Control Board on or before the 30th day of June following the financial year to which that return relates.

Haier’s Responsibility
Haier India being a responsible and trustworthy brand is taking all the necessary and expected steps for the betterment of the environment as well as living beings. Haier had joined hands with a number of recyclers to ensure environment-friendly recycling of the electronic items, such as refrigerators, washing machines, air conditioners, etc. that are either achieved their end of life or are old, unusable, etc. Apart from above, Haier had taken the following steps for proper recycling of e-waste of its customers:-

1. Collection and Channelization of e-waste:- Haier had setup toll free Number where the customers can call and registered their products for recycling. As soon as e-waste pick up is registered by the customer a representative will come to collect the product.
2. Dismantling & Recycling of e-waste: Haier has appointed a number of recyclers who are the leading name in the recycling industry to responsibly and in an environment-friendly manner recycle the e-waste generated in India.
3. Awareness for e-waste: Haier is actively sharing Infographics & engagement posts on its social platforms to create more awareness about e-waste and its hazards. In addition Haier is also conducting awareness programs in Schools, RWA’s, Office Clusters etc to create awareness.

Collection Centre maintained by M/s WEEE-PRO Resource Recovery Solutions Private Limited (as on date)

Our PRO Partners (E-waste Partner) (as on date)

1. M/s WEEE- PRO RESOURCE RECOVERY SOLUTIONS PRIVATE LIMITED
   Address: Flat-702, Tower-6, Unitech Horizon, Plot No.-6, Sector Pi- 2, Greater Noida,, Noida, Gautam Buddha Nagar, Uttar Pradesh, India, 201310
   Contact Details: Mr Bhagwati Prasad Suman; 9958445960 ; info@weee- pro.org; 1800-572-2961

2. PEGASUS SUSTAINABILITY PRIVATE LIMITED
   Address: F-6, 1ST FLOOR, 4648/1, 21, ANSARI ROAD, DARYAGANJ, New Delhi, Delhi, 110002
   Contact: Mr. Subratoo Mukherjee: 9811707777; http://www.pegasusnetwork.in 1800-420-3177

3. M/s Green Planet
   Address: 17D, 105, Vasundhra, Gaziabad 201012
   Contact Details: Mr. Anish Duggal 9212503521; http://greenplanetpro.in/ 1800 8430 027

Contact for further information:
Haier Appliances (India) Pvt. Ltd.
CIN#U74140DL2003PTC119101
Building Number 1, Okhla Industrial Estate, Phase III, Opposite Modi Mill, New Delhi-110020.

Toll-Free Hotline Number
1800-102-9999
1800-419-9999

Query Between
9.00 AM to 9.00 PM
(Monday to Saturday)
Email- customercare@haierindia.com

Haier
Inspired Living

• Customer Name…
• Serial No…
• Dealer Seal….
• Address…
• ……Date of purchase.
• Model No..

HAIER WARRANTY

HAIER APPLIANCES (INDIA) PVT. LTD. (here-in-after referred to as “the Company”) hereby offers the following warranty to the original domestic purchaser commencing from the date of the purchase. The Company, at its sole discretion, will free of charge repair or replace any defective part or parts which prove to be defective in workmanship and/or materials and not due to abnormal or improper usage

CONDITIONS OF WARRANTY

1. This warranty will automatically terminate on the expiry of the warranty period from the date of delivery.

2. The Company is not liable for any delay in servicing due to reasons beyond the control of the Company or any of its authorised service centres.

3. Parts replaced or repaired under this warranty are warranted throughout the remaining of the original warranty period.

4. It is entirely left to the Company’s discretion to repair/replace parts at the site of installation or at the authorised service centre of the Company.

5. This warranty shall be strictly limited to the repairs or replacement of defective parts specified in the warranty. This warranty shall not cover any consequential or resulting liability.

6. This warranty shall not, in any case, extend towards payment of any monetary consideration whatsoever or replacement or return of the product.

7. The Company may repair/supply parts free of cost during the warranty period. This warranty does not cover any Excise duty, Central or Sales tax, Octroi and other local taxes or levies on the components/parts.

8. The parts shall be replaced by functionally operating equivalent material only and not with brand new ones and are likely to be different from the one originally fitted. The parts thus removed shall be taken back by the Company.

9. The Company reserves the right to retain any part or component replaced at its sole discretion during the warranty period.

10. In no event the Company or its authorised service centre be liable for any consequential damages or resulting liability, damage or loss arising directly or indirectly out of any defect in the product.

11. This warranty is not valid in case of the following events:

    • If the Product has been Installed/Serviced/Repaired/Opened or Tampered by any unauthorised personnel.
    • If defects arise/caused by accidents, alteration, misuse, neglect, substitution of original components with spurious/non-genuine components, attacked by household pest / rodents, fire, flood, earthquake, lightning and/or any other act of God/natural calamities.
    • The product is shifted outside India.

12. For any service under this warranty beyond city/town/municipal limits from the Company/authorised service centre, a fixed charge of Rs. 50 will be collected from the customer in addition to the actual to and fro charges by the shortest route
    Service charges applicable after expiry of comprehensive warranty.

13. Any change of location or change in the ownership during the warranty period must be intimated in writing to the Company.

14. The Company’s employees or its authorised representatives have no authority to vary the terms of this warranty.

15. This warranty is effected in New Delhi and claims, if any, shall be made only before the courts having jurisdiction in New Delhi and no claim shall be made against the Company outside New Delhi not with standing that the Appliance may have been sold or delivered elsewhere.

HAIER APPLIANCES (INDIA) P. Limited, Building No – 1, Okhla Industrial Estate, Phase III, New Delhi-20
Tel.: 011-39496000, 30674000. |
Fax: 011-30674088
Website : www.haier.com/in

• Address…
• Customer Name…..
• Serial No…
• Dealer Seal
• Date of purchase..
• Model No…

QR Code to directly chat with customer care executive.
(Customer Care WhatsApp No.: +91 8553049999)

Haier
Toll Free – 24×7
1800-419-9999
1800-102-9999
Email: customercare@haierindia.com

Haier Appliances India Pvt. Limited
Building No. – 1, Okhla Industrial Estate, Phase – 3, New Delhi – 110020
Https://www.haier.com/in/
Haier Careline: 1800-419-9999, 1800-102-9999
Tel.: 011-39496000, 30674000.
Fax: 011-30674088,
Email: info@haierindia.com
Website: www.haier.com/in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>