Newglee Technology Co Ltd TZS128A1 Android TV Box User Guide
- June 1, 2024
- Newglee Technology Co Ltd
Table of Contents
MODEL X
Quick Guide
TZS128A1 Android TV Box
Front & Top & Rear & Left Side
Front & Top & Rear & Left Side
- DC 5V/2A Connects to the DC power adaptor
- ETHERNET Connects to the network with an Ethernet cable
- HD OUT Connects to the TV using an HD 2.0 cable
- USB 3.0 Connects to a USB device (USB 3.0)
- Micro SD Input Micro SD Memory
- USB 2.0 Connects to a USB device (USB 2.0)
- LED Shows standby or operation modes
Technical Specifications
- Amlogic S905X3, Quad-Core ARM Cortex A55 Processor
- High performance multi-core ARM G31 MP2 GPU
- 4GByte System memory
- 32GByte eMMC Flash memory
- H.265 HEVC MP-10@L5.1 up to 4Kx2K@60fps
- 8th Generation Advanced Amlogic TruLife Image Engine
- HDR10+, HOR10, HLG and Technicolor HDR processing
- Integrated Dual band Wifi(2.4G / 5G) & Bluetooth 5.0
- Support SD micro card slot
- Support USB 3.0 and USB 2.0 host
Accessory
- Quick Guide
- RCU
- AAA Battery
- DC Adapter
- HD 2.0 Cable
RCU
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide teasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC ID: 2BFM3-T2S128A1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>