Agua Canada DJENA Chrome Round Hook Installation Guide

June 1, 2024
Agua Canada

Agua Canada DJENA Chrome Round Hook

Agua-Canada-DJENA-Chrome-Round-Hook-PRO

Product Information

Specifications:

  • Product Name: DJENA Round Hook
  • Material: Plastic
  • Color: White
  • Dimensions: 2 inches diameter

Product Usage Instructions

Facility:

  1. Determine where you’d like to mount the DJENA Round Hook and mark the position with a pencil, ensuring it is straight.
  2. Using a drill and a 1/4 inch (6.35 mm) drill bit, drill two vertical holes for mounting.
  3. Insert plastic anchors into the drilled holes and lightly tap with a hammer until flush with the wall.
  4. Position the mounting brackets against the anchor holes and thread screws until secure.
  5. Use a screwdriver to loosen the screw until the fixture is able to remain flush over the mounting bracket.
  6. Place the fully-assembled fixture over the mounting bracket and use a screwdriver to tighten the fixture securely onto the bracket.
  7. Ensure the fixture is securely attached to the wall by gently moving both posts from side to side.

Frequently Asked Questions (FAQ):

  • Q: Can I use the DJENA Round Hook for hanging heavy items?
    A: The DJENA Round Hook is designed for light to medium-weight items. For heavy items, we recommend using additional support or a sturdy hook.

  • Q: What should I do if the plastic anchors do not fit securely in the drilled holes?
    A: If the plastic anchors do not fit snugly, try using a slightly larger drill bit to widen the holes or consider using different anchors suitable for your wall type.

INSTALLATION

  1. Determine where you’d like to mount it and mark with pencil. Ensure the marked place is straight.
  2. Using a drill and 1/4″ (6.35 mm) drill bit, drill two vertical holes for each.
  3. Insert plastic anchors into drilled holes. Lightly tap with hammer until flush with wall.
  4. Position the mounting brackets against anchor holes and thread screws until secure.
  5. Using screwdriver to loosen screw until fixture is able to rest flush over mounting bracket.
  6. Place fully-assembled fixture overtop the mounting bracket. Using screwdriver again to tighten the fixture onto the mounting bracket.
  7. Make sure the fixture is secured to the wall by gently moving both posts from side to side.

WARRANTY

Agua Canada warrants all its products against material or workmanship defects under normal conditions of use and maintenance. The warranty period may vary depending on the type of product. Agua Canada will, at its discretion, repair or replace parts or products that are found defective for the normal home use for which they were designed. Agua Canada is not responsible in any way for costs related to labour or any other costs related to a product’s installation, repair or replacement, nor for any damage, incident, expense, or direct or indirect loss. Any use of essential oil is not recommended and could cause deterioration of acrylic and is not covered by the warranty

BATHROOM ACCESSORIES
Guaranteed for a period of five (5) years against defects in manufacturing.

Head office
2732 Étienne Lenoir, Laval
Québec, H7R 0A3, Canada
[email protected]

aguacanada.com
833 689-2482

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Agua Canada User Manuals

Related Manuals