Akoma B096X5N88Z 300w Bluetooth Hound Heater Deluxe with 1 Inch Cord Instruction Manual

Akoma B096X5N88Z 300w Bluetooth Hound Heater Deluxe with 1 Inch Cord

Instruction

Step

1. Download the AKOMA App.
2. A) Open the App. Press “Sign Up”.

B) Register by filling in all fields.

C) Enter the 6-digit verification code you will receive in your email.

D) To Login:
– Enter Email and Password.
– Click “Consent” if you agree with terms.
– Click “Login”.

E) Press “OK” for AKOMA to use Blue Tooth.

3. Press ” Add Device”.
   

4. Press “Bind ” to connect cell phone & Smart Heater.
   

5. Press “Connect My Device”.
   

6. Click “Allow While Using App”, then click “OK”.
   

7. A) To connect to Wi-Fi: select WLAN and enter Password; then click “OK”.
   
   B) Screen will show:
   
   C) Click “Allow” to let App find and connect to device on your local Wi- Fi network.
   

8. Watch the Green LED on the camera:
   Flashes Slow – Finding Wi-Fi.
   Flashes Rapidly – Connecting to Wi-Fi.
   Steady On – Connected to Wi-Fi.
   

9. Control Page: it will take 20 seconds or longer to connect and show the video from the camera.
   

10. Control Page:
    A: On the center of the dial, it shows the actual room temp.
    B. On the outer rim, press and hold the dial and move to desired temp (set temp).
    The heater will turn on when the room temp is lower than the set temp.

11. To return to the home page: press the return arrow in the upper left corner.
    This will bring up the Home Page.
    The Home Page allows you to see your “Profile” and add additional devices.
    To go to the device Control Page, click on the device from the Home Page.
    

12. A. To unbind the cell phone and device, click “ ? “ in the upper right corner of the Control Page.
    
    B. Click “Device Settings”.
    
    C. Click “Unbind Device”.
    
    D. The Home Page will show “No Devices”.

13. To reset in order to connect again:
    Press and hold the reset button for 5 seconds.

14. Instruction of editing Profile:
    A. Click “Profile”.

B. Click “Profile”.

C. Click “Profile photo”.

D. (1) Click “Take a picture”.
(2) Click “Photo album” to select photo.
(3) Click “Cancel” to exit.

E. Click “Nickname” to change nickname.

F. Enter desired nickname, then click “complete”.

G. Click “Change password” to change password.

H. Enter password information, click “Reset Password” to confirm.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>