InverterCool FDD Smart Variable Speed SVS Ducted Split Systems Instruction Manual
- June 1, 2024
- InverterCool
Table of Contents
InverterCool FDD Smart Variable Speed SVS Ducted Split Systems
Product Information
Specifications:
- Product: InverterCool Smart Variable Speed (SVS) Ducted Split System with Fault Detection and Diagnostics (FDD) Device
- Manufacturer: InverterCool
- Release Date: January 2022
Product Usage Instructions
Part A: FDD Installation and Troubleshooting
- Turn off the power supply for the heat pump before installing the FDD device.
- Place the FDD device on the PCB cover ensuring all clasps are properly fixed.
- Ensure the device is positioned correctly in the designated hole.
- Connect the wire to the antenna and make sure it is securely connected.
- Plug the male terminal into CN11 connector on the main control board of the outdoor unit and fix the cable.
- Power on the heat pump and check if the FDD device is working properly.
- Verify the LED indications for proper functioning of the FDD device.
FDD Installation and Troubleshooting
InverterCool Smart Variable Speed (SVS) Ducted Split systems equip with Fault Detection and Diagnostics (FDD) device can save dealers’ time when installing and servicing. Be sure to turn off the power supply for heat pump prior to install the FDD device. Refer to the following steps to install this device.
- Put the FDD device on the PCB cover, make sure all the clasps are properly fixed.
- Connect the wire to the antenna
- Plug the male terminal into CN11 connector on main control board of outdoor unit and fix the cable
Power ON the heat pump and check if the FDD device is working properly. The normal working state of FDD device should be the blue LED (No.1) is blinking with other LEDs light OFF.
Warranty Registration via InverterCool FDD App
With the FDD device, InverterCool, Inc. provides an easy way for dealers to help their customers complete registration via the InverterCool FDD App in just minutes. Then dealers can monitor units’ live data and perform remote field settings for the heat pump. Working alongside the InverterCool Customer Service Team, the dealer can guarantee the installation and servicing quality. Alternatively, homeowner/dealer/builder can register at www.invertercool.com. However, it will not allow the dealer to monitor the system. Search FDD on the App Store or Google Play now.
- Create an FDD account
- Add Unit (Register a new HP)
- Sign an agreement with the homeowner
- Scan/Input serial numbers to submit
- ©2022 InverterCool, Inc. 6611 NW 84th Ave, Miami, FL 33166
- Tel: 1 (855) 632 0620
- www.invertercool.com
Log in to www.invertercool.com or InverterCool FDD App >Files >Installation to get the latest guide.
FAQ
Q: What should I do if the FDD device fails to boot?
A: If the No.1 LED is always off or blinking after 40 seconds, replace the FDD
device with a new one.
Q: How do I troubleshoot if there are issues with LED displays?
A: Check if the FDD cable is securely connected to the PCB of the heat pump.
Replace the FDD device if needed.
Q: How can I improve signal reception for the FDD device?
A: If there are signal issues, consider installing an AT&T signal booster or
contacting the InverterCool Customer Service Team for assistance.