SIEMENS LD98WMM60B Clear Glass Downdraft Hood Owner’s Manual

SIEMENS LD98WMM60B Clear Glass Downdraft Hood Owner’s Manual

Specifications

• Model:  IQ700 LD88WMM66B
• Type:  Downdraft hood
• Width : 80 cm
• Material:  Clear glass
• Special Feature : Guided Air technology

Product Usage Instructions

Installation

1. Ensure the area where the downdraft hood will be installed is clear and accessible.
2. Follow the installation instructions provided in the user manual for proper setup.
3. Connect the downdraft hood to the appropriate power source as per the electrical requirements.

Operation

1. To activate the hood, slide it up from the countertop when cooking to allow it to function.
2. The Guided Air technology will enhance the performance of the hood during operation.
3. Adjust the fan speed and other settings as needed for optimal ventilation.

Maintenance

1. Regularly clean the glass surface of the downdraft hood using a mild detergent and a soft cloth.
2. Check and clean the filters periodically to ensure efficient operation.
3. Refer to the user manual for detailed maintenance instructions and safety precautions.

FAQ

• Q: How do I replace the filters?
• A : To replace the filters, first, ensure the downdraft hood is turned off and disconnected from power. Follow the filter replacement instructions provided in the user manual, typically involving unlocking the old filter, removing it, and installing a new one in its place.

• • *       *  **A** : Yes, this downdraft hood can be used with gas stoves. Ensure proper installation and follow safety guidelines when using it with gas appliances. **Q: Can I use this downdraft hood with gas stoves?**

Optional accessories

HZ9VDSB1 90° flat duct bend horizontal, HZ9VDSB2 90° flat duct L vertical, HZ9VDSI0 Adapter round-flat, HZ9VDSI1 90° Adapter round-flat, HZ9VDSM1 Straight tube 500mm, HZ9VDSM2 Straight tube 1000mm, HZ9VDSS1 Connector sleeve (female), LZ21WWB16 Clean Air Plus odor filter (replacement), LZ21WWI16 Clean Air Plus recirculation kit, LZ21WWJ11 Long Life recirculation kit, LZ21WWM11 Installation kit remote motor, LZ28WWY12 Mounting kit for seamless installation, LZ31WWX11 Flat duct adapt.round 90° DN150 Metal, LZ31XXX11 Aluflex pipe cyl. 150

The seamlessly designed glassdraftAir is only visible when in use, with an impressive performance thanks to the new Guided Air technology.

Features

Technical Data

• Typology:  …………………………………………………………….. Downdraft
• Length electrical supply cord : ……………………………………. 130.0 cm
• Min. required niche size for installation (HxWxD):  ………… 703mm x 781.0mm x 123mm mm
• Weight:  …………………………………………………………………….37.0 kg
• Type of control : ……………………………………………………… Electronic
• Number of speed settings:  ………………………… 3-stage + 2 intensive
• Maximum output air extraction:  ………………………………….501 m³/h
• Boost position output recirculating : ……………………………..525 m³/h
• Maximum output recirculating air:  ……………………………… 416 m³/h
• Boost position air extraction:  ………………………………………775 m³/h
• Maximum Air flow : ………………………………………………….. 501 m³/h
• Noise level:  …………………………………………………..62 dB(A) re 1 pW
• Diameter of air outlet : ………………………………………………..150 mm
• Grease filter material:  ……………………………Washable stainless steel
• EAN code : …………………………………………………….4242003881033
• Connection Rating:  ……………………………………………………… 300 W
• Fuse protection:  ……………………………………………………………..10 A
• Nominal power : ……………………………………………………..220-240 V
• Frequency:  ……………………………………………………………..50; 60 Hz
• Plug type : ………………………………………………………………… GB plug
• Installation type : ………………………………………………………… Built-in
• • • • Delay Shut off modes:  ………………………………………………….10 min

Variant

• 80 cm wide
• Energy Efficiency Class: A (at a range of energy efficiency classes from A+++ to D)
• Extraction rate exhaust air according to EN 61591:
• max. normal use501 m³/h, intensive 775 m³/h
• • Noise max. Normal Level: 62 dB*

Features

• Fully automatic hood
• cookConnect hob-based hood control
• climateControl Sensor
• Emotion Light Pro : Ambient light
• 3 power levels and 2 intensive settings
• touchControl
• The standard functions are located on the right-hand user interface
• Efficient BLDC motor
• Automatic intensive revert (6mins)
• Automatic after running (10 minutes)
• 2 x metal grease filter cassettes
• Grease and charcoal filter saturation indicators
• The filter service button automatically lifts filters into the service position for easy removal

• ---

Connectivity

• Home Connect: Remote Monitoring and Control for connected home appliances and operation via smartphone or tablet (only in countries where Home Connect service is available)
• The Home Connect functionality can be extended by integrating numerous applications from external cooperation partners (partnerships)
• Voic Control enabled via popular voice assistants (only in countries where this service is available)
• Interval function:  available via Home Connect
• Silence function:  available via Home Connect

Design

• An extendable clear glass panel with edge lighting
• The glass panel can be easily removed and cleaned
• For installation in a kitchen cabinet, an Integrated
• Suitable for installation in an island or Semi-island kitchen solution Performance
• Suitable for ducted and re-circulating operation
• For recirculated extraction Clean Air Plus recirculation kit (accessory) needed
• Extraction rate according to EN 61591 ø 15 cm:
• max. Normal use501m³/h
• Intensive775 m³/h
• Noise level according to EN 60704-3 and EN 60704-2-13 exhaust air:
• Max. normal use: 62dB(A) re 1 pW
• Intensive: 70 dB(A) re 1 pW
• Maximum extraction rate exhaust air 501 m³/h according to EN 61591
• Noise level according to EN 60704-3 and EN 60704-2-13 at max. normal use exhaust air: 62 dB(A) re 1 pW
• With the Clean Air Plus recirculation kit (available as optional accessory) your appliances reaches:
• Extraction rate in recirculation mode:  Max. normal use:416m³/h
• Intensive: 525m³/h
• Noise level in recirculation mode: Max. normal use :65dB(A) re 1 pW
• Intensive: 70 dB(A) re 1 pW
• Average Energy Consumption:  36.9 kWh/year*
• Blower Efficiency Class:  A*
• Lighting Efficiency Class:  -*
• Grease Filtering Efficiency Class : B*
• • • • • • • • • Power rating : 300 W

Planning and installation information

• Not suitable for combination with gas hobs
• Extension height 250 mm
• Dimensions (HxWxD):  709 x 812 x 140 mm
• Built-in dimensions (HxWxD):  703 x 781 x 123 mm
• Electrical cable length 1.3 m
• Please reference the built-in dimensions provided in the installation drawing
• In accordance with the EU-Regulation No 65/2014

Dimensioned drawings

• A : Installation of motor unit on front/rear or offset laterally with max. 3 m clearance (special accessory required)Motor unit must always be accessible
• B:  5.5 mm

Measurements in mm
Seamless, top-mounted installation
(Special accessory required)

• A : Worktop overlap to kitchen cabinet
• B:  ≥ 20 mm between the Guided Air suction area and a cabinet wall
• C:  ≥ 60 mm for air recirculation ≥ 100 mm for air extraction with ducting in the plinth  ****
• D:  Motor unit must always be accessible

Measurements in mm
Standard, top-mounted installation

Standard : with worktop divider between downdraft and hob

• A : ≥ 20 mm between the Guided Air suction area and a cabinet wall
• B:  ≥ 60 mm for air recirculation ≥ 100 mm for air extraction with ducting in the plinth
• C : Motor unit must always be accessible

Measurements in mm
Combination with electric hob

Coamlace ton-mounted installation

A : Worktop overlap to kitchen cabinet Combination with gas hob is not possible

To prevent power loss, observe the following:

• Do not install upper cabinets or open shelf elements above the appliance
• • Distance between appliance frame and wall min. 50 mm

Measurements in mm
Combination with electric hob Standard. ton-mounted installation

Standard : with worktop divider between downdraft and hob
Combination with gas hob is not possible

To prevent power loss, observe the following:

• Do not install upper cabinets or open shelf elements above the appliance
• Left/right distance between the appliance and wall/adjacent upper cabinet min. 500 mm
• Distance between appliance frame and wall min. 50 mm

Measurements in mm
Combination with electric hob Standard. ton-mounted installation

Standard:  with worktop divider between downdraft and hob Combination with gas hob is not possible
To prevent power loss, observe the following:

• Do not install upper cabinets or open shelf elements above the appliance
• Left/right distance between the appliance and wall/adjacent upper cabinet min. 500 mm

Measurements in mm
Seamless, top-mounted installation

(Special accessory required)

• A : Worktop overlap to kitchen cabinet
• B:  Ventilation gap for hob
• C:  ≥ 60 mm for air recirculation
• ≥ 100 mm for air extraction with ducting in the plinth
• • D : Max. pull-out depth Motor unit must always be accessible

Planning recommendation, air recirculation

• A. Standard installation: Partially laid around the toe kick
• B.Installation with fully laid pipework to the toe kick for poorly insulated exterior walls or above cold floors

Measurements in mm
Standard, top-mounted installation

• Standard : with worktop divider between downdraft and hob
• A : Ventilation gap for hob
• B : ≥ 60 mm for air recirculation
• ≥ 100 mm for air extraction with ducting in the plinth
• C : Max. pull-out depth Motor unit must always be accessible

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>