Heatware F110 Portable Mini Mug Press User Manual

F110 Portable Mini Mug Press

Specifications

• Product: Portable Mini Mug Press
• Models Available : 11 oz mug press, 15 oz mug press
• Power : AC 110V-220V, 50/60Hz
• Temperature Range: Adjustable
• Time Range: Adjustable

Product Usage Instructions

Startup and Shutdown:
Startup: After powering on, short press the start button to start the machine. It will automatically heat up.
Shutdown: Press and hold the start button for 3 seconds to shut down the machine.

Auto Shutdown
The machine will automatically shut down if there is no operation within 60 minutes. To restart after auto shutdown:

1. In shutdown state, press and hold the start button for 6 seconds.
2. Turn the switch to select the required temperature unit.
3. Short press the start button to start the machine.

Parameter Setting

Temperature Setting:

1. Turn the display half a turn to the right.
2. Enter the temperature setting mode after a beep sound.
3. Turn the switch to the right to increase the temperature or left to reduce it.

Time Setting

1. Turn the display half a turn to the left.
2. Enter the time setting mode after a beep sound.
3. Turn the switch to the right to increase the time or left to reduce it.

Start Hot Stamping

1. Plug in the power cord and turn on the machine.
2. Short press the start button to start the machine.
3. Set printing temperature and time according to material type.

Hot Stamping Process

1. Ensure the machine reaches the set temperature before transfer printing.
2. Stick the picture on the mug.
3. Open the machine and place mugs in from left and right.
4. Press down the handle gently.
5. Press the countdown button to start countdown.

Pressure Adjustment

1. The pressure can be manually adjusted for different mug sizes by turning the handwheel.
2. Turn clockwise to increase pressure and counterclockwise to reduce it.

FAQ

• What should I do if the transferred pattern color is not as expected?
  Adjust the transfer time – increase if too light, decrease if too dark.

• How can I maintain pressure balance for different mug sizes?
  Try to keep pressure balanced on both sides by adjusting the handwheel accordingly.

• What safety precautions should I follow when using this machine?

  • Always unplug when moving or installing accessories.
  • Operate on a flat, stable surface in a ventilated area.
  • Wear protective equipment when operating.
  • Avoid touching the heating plate when the machine is heating up.

Introduction

1. Handle
2. Clip
3. Power socket
4. Mug heater
5. Aviation connector
6. LED Display
7. Setting knob

Accessories list

USING INSTRUCTION

Startup

• After power on, short press the start button to start the machine.
• After startup, the machine will automatically heat up.

Shutdown
Press and hold the start button for 3s to shut down

Auto shutdown
The machine will automatically shut down if there is no operation within 60 min.

Temperature unit conversion F =°C

1. In shutdown state
2. Press and hold the start button for 6s.
3. Turn the switch to select the required temperature unit.
4. Short press the start button to start the machine.

Parameter setting

Temperature setting:

1. Turn the display half a turn to the right.
2. Enter the temperature setting mode after a beep sound.
3. Turn the switch to the right again to increase the temperature (+).
4. Turn the switch to the left again to reduce the temperature (-).

Time setting:

1. Turn the display half a turn to the left.
2. Enter the time setting mode after a beep sound.
3. Turn the switch to the right again to increase the time (+).
4. Turn the switch to the left again to reduce the time (-).

Ready to start
Parameter setting

1. Turn the display for a half turn.
2. Enter the setting mode after a beep sound.
3. Set corresponding parameters according to material type.

Start hot stamping

1. Plug in the power cord and turn on the power
2. Short press the start button to start the machine
3. Set printing temperature and time

Hot stamping process

1. Make sure that the machine reaches the set temperature before transfer printing.
2. Stick the picture on the mug
3. Open the machine
4. Put the mugs in from the left and right
5. Press down the handle
6. Press the countdown button to start countdown

Tips

1. Increase the transfer time if the color of the transferred pattern is too light.
2. Reduce the transfer time if the color of the
3. transferred pattern is too dark.

Pressure adjustment

1. The pressure can be adjusted manually for different sizes of mugs
2. Turn the handwheel clockwise to increase the pressure
3. Turn the handwheel counterclockwise to reduce the pressure
   Tips: Please try to keep the pressure balance at both sides.

Electrical Diagram

1. MaincontrolBoard
2. Connectthecable
3. Powerstrip
4. Down temperature sensor
5. Buzzer
6. Thermal cutoff
7. Heating Filament

Main board wiring diagram

1. Outputzero line
2. Display
3. Inputzero line
4. Temperature probe
5. Input live line
6. Sensorswitch (backup)
7. Output live line

Guarantee

• The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China.
• The services are as follows:
  • Within 12 months this product has the performance failure listed in the product
  • Performance Failure Table”.It is confirmed by manufacturer and can be used for maintenance service free of charge. If out of validity, damage caused by force maieure,or human causes,the machine is not covered by the warranty, repair in charae.

Safety instruction

Before operating this unit,please read these instructions completely and save them.
Notice:

1. Keep unplug when moving the machine.
2. Keep unplug when installing accessories.
3. Place on a flat and stable platform and operate under ventilated conditions.
4. Wear special protective equipment when operating the machine

Warning
lmproperuse may result in electric shock,fire,personal injury and other damage.

1. Do not use this machine in hazardous location.
2. Do not use when the machine is not working properly.
3. Do not allow children or adults who do not understand this manual to operate this machine.
4. Do not disassemble and repair this machine.
5. Do not use an unsuitable AC outlet.
6. Do not touch the heating plate when the machine heating

Basic Product Parameters

• Model : F110
• Name: Portable mini mug press
• Heating method: Electric heating coil
• Rated voltage/frequency: 120V~60Hz 220-240V~50Hz
• Rated power: 320W
• Temperature range: 40°C-21 o°C (1 o4°F-41 OOF)
• Time range : 1-999s
• Press pad size: L 110mm, printing diameter 85mm
• Net weight: 2.4kg Gross weight:2.8kg
• Outer box size: 240215280mm
• Outer box volume: 0.015 cube

Warranty

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>