dals 6001-CC 120V Color Changing PowerDEL Puck Installation Guide
- June 16, 2024
- dals
Table of Contents
dals 6001-CC 120V Color Changing PowerDEL Puck
ITEMS INCLUDED IN THE BOX
- 1x 6001-CC surface/recessed puck
COMPATIBLE POWER FEED ACCESSORIES (SOLD SEPARATELY) 
6001-PC: For a direct wire setup
72″ power cord to connect a 120V LED puck to a 120V outlet. Cordon
d’alimentation de 72 po. pour connecter une rondelle DEL 120V a une prise
mura/e 120V.
COMPATIBLE EXTENSION CORDS (SOLD SEPARATELY):
6001-E24:
24″ extension cord to connect between two 120V LED pucks. Cordon d’
extension de 24 po. pour connecter deux Randel/es DEL 120V.
WARRANTY
DALS offers a 5 year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1 877 430 1818 or send an e-mail to info@dals.com. OALS off re une gorontie de 5 ons a portir de lo dote d’ ochot qui couvre lo reporotion ou le remplocement des pieces du boi’tier, des pieces optiques et electroniques defectueuses. Pour contocter le service a lo clientele de OALS, composez le 1 8774301818 ou por courriel a info@dols.com.
Installation guide
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT
BREAKER. Instructions pertaining to a risk of fire, electric shock or injury
to persons. Installation must be done according to local electrical codes.
Installation should be done by a certified electrician. This class B digital
apparatus complies with Canadian ICES-OO5. This digital apparatus does not
exceed the Class B limits for radio-noise emissions from digital apparatus as
set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Surface installation (wires under a shelf or cabinet)
-
Remove the lixture from the surface adapter.
-
With a pencil, mark the position then screw the surface adapter in place with the wire slots in the desired direction.
-
Run the wires through the wire slots, compress the springs of the fixture and push the fixture into the surface adapter.
-
Remove the fixture from the surface adapter.
-
With a pencil. mark the desired position for the surface adapter.
-
With the template, drill two 1/2″ holes lo pass the connector wires through the shelf.
-
Screw the surface adapter in position.
-
Run the wires through the holes, compress the springs of the fixture and push the fixture into the surface adapter.
Recessed installation
- Remove the fixture from the surface adapter.
- With a pencil. mark the desired position for the puck.
- Using the template, drill a 2-5/8″ hole in the shelf.
- Compress the springs of the fixture and push it into the opening.
Template
Documents / Resources
| dals
6001-CC 120V Color Changing PowerDEL
Puck
[pdf] Installation Guide
6001-CC, 6001-CC-SN, 6001-CC-WH, 6001-CC 120V Color Changing PowerDEL Puck,
120V Color Changing PowerDEL Puck, Color Changing PowerDEL Puck, Changing
PowerDEL Puck, PowerDEL Puck, Puck
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>