RYOBI RMTL4 USB Lithium Magnetic Tray Light Kit Instruction Manual

Table of Contents

RYOBI-RMTL4-USB-Lithium-Magnetic-Tray-Light-Kit-
product

Specifications:
- Product Name: Magnetic Tray Light
- Model: RMTL4
- Intended Use: General illumination
- Safety: Class III protection

Installation:
- Mount the product using the provided wall mounting holes. Do not use the magnet for mounting purposes.
- Ensure the product is securely fixed to avoid accidents.
Light Safety:
- Do not disassemble the product.
- Avoid directing the light beam at persons or animals to prevent injury or vision loss.
- Replace the whole luminaire when the light source reaches its end of life.
Battery Safety:
- Use only recommended battery pack and charger to prevent damage, explosions, or fires.
- Do not immerse batteries, tools, or chargers in fluids to avoid short circuits.
- Transport lithium batteries following local regulations and ensure proper packaging.
Maintenance:
- Use original accessories and spare parts for replacements.
- Contact an authorized service center for component replacements not described in the manual.
- Avoid using solvents on plastic parts as they may cause damage.
Symbols:
- DC Symbol: Direct current
- RCM: Regulatory Compliance Mark for meeting applicable regulatory requirements

Q: Can I use a different battery pack with the product?
- A: No, using a different battery pack can cause damage, explosions, or fires. Always use the recommended battery pack and charger.
Q: How should I transport lithium batteries?
- A: Follow local regulations and ensure proper packaging. Avoid contact with other batteries or conductive materials during transport.

IMPORTANT!

You must read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Safety, performance, and dependability have been given top priority in the design of your magnetic tray light.

The light is intended for general illumination.
The magnet on the product is not intended for mounting. Mount the product using the provided wall mounting holes.
Do not use the product for any other purpose.
Use of the product for operations different from intended could result in a hazardous situation.

LIGHT SAFETY WARNINGS

The light source of this luminaire is not replaceable. When the light source reaches its end of life the whole luminaire shall be replaced.
Use only with the recommended battery pack and charger. Any attempt to use another battery pack will cause damage to the product and could explode, cause a fire, or personal injury.
Do not disassemble the product.
If wrapped or in contact with fabrics, the lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the lens to come in contact with anything.
Do not place the product or battery pack near fire or heat. This will reduce the risk of explosion and possible injury.
Remove the battery pack or disconnect the mains power before starting any work on the product.
Do not store the product in a damp location, or in a location where the temperature may reach or exceed 40°C.
For example, inside sheds, vehicles, or metal buildings in the summer.
Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance).
Staring into the light beam may result in serious injury or vision loss.

BATTERY SAFETY WARNINGS

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in fluid or allow fluid to flow inside it.
Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

TRANSPORTING LITHIUM BATTERIES

Transport the battery by local and national provisions and regulations.
Follow all special requirements on packaging and labeling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, nonconductive caps or tape.
Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

Use only original accessories and spare parts. Should components that have not been described need to be replaced, please contact an authorized service center. All repairs should be performed by an authorized service center.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

Direct current
Regulatory Compliance Mark (RCM). The product meets applicable regulatory requirements.
Please read the instructions carefully before starting the product.
Do not stare at the operating light source.
Class III protection
Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste. Waste batteries and waste electrical and electronic equipment must be collected separately. Waste batteries, waste accumulators, and light sources have to be removed from the equipment. Check with your local authority or retailer for recycling advice and collection points. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand for raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and human health if not disposed of in an environmentally compatible manner. Delete personal data from waste equipment, if any.

SYMBOLS IN THIS MANUAL