KOMPAK 3966206 Gasoline Petrol Generator User Manual

Petrol Generator
User’s Manual

 3966206 Gasoline Petrol Generator

SAFETY

| Perform a visual inspection of the external and internal components.
---|---
|  The temperature range for the use of this equipment is between + 5ºC and + 40ºC
| All items must be cleaned regularly.
| The air filter must be cleaned regularly.
| The exhaust gases contain carbon monoxide. This gas is colorless and colorless and is very dangerous. NEVER USE THE EQUIPMENT IN A LOCATION CLOSED OR WITH POOR VENTILATION.
| The repair of the generator must be carried out by qualified and authorized personnel for this purpose
| Store the generator in an area with good ventilation
| The guarantee is automatically canceled if you do not follow the described start and stop process.
| Failure to follow the described process may damage the equipment. For this purpose
| Check the screws and nuts that due to the vibration of the equipment could loosen.
| Good quality oil and fuel are imperatives for using the equipment.
| Long-term storage should be done in a dry place. Frost can damage the equipment.
Thoroughly dry equipment before storage and store in a dry, not cold place.
| Make sure all filters are cleaned regularly.
| The exhaust temperature is high during use of the equipment and remains warm even after the generator is turned off. Be careful not to touch the hot exhaust and wait for the equipment to cool down before moving it.
| Do not smoke and avoid flames and sparks when using the generator or when filling the tank. Do not store the generator near flammable material to avoid explosion hazard.
| Never place the generator in an inclined or vertical position, to avoid fuel loss and equipment damage.
| ALWAYS control the oil and fuel level, as well as its maintenance before each use

COMPONENT IDENTIFICATION

1. DC TERMINAL
2. VOLTMETER
3. CIRCUIT BREAKER
4. FUEL VALVE
5. AC RECEPTACLES
6. ENGINE SWITCH
7. GROUND TERMINAL
8. AC FUSE (OR AC CIRCUIT PROTECTOR)
9. OIL FILLING CAP
10. RECOIL STARTER GRIP
11. AIR CLEANER
12. CHOKE LEVER
13. DC FUSE (OR DC CIRCUIT PROTECTOR)

Starting-up the machine

Check the oil level whenever the appliance is to be put into operation. Add engine oil if necessary.
To ensure quality, every piece of equipment is subject to a test operation and filled with motor oil.
Oil is drained before transport; however, there can be some motor oil remains on the dip stick.
Please check carefully the oil level and add motor oíl again

Filter position / spark plug

* STANDARD : BPR4ES (NGK)
ESPACIADO / GAP : 0,7 – 0,8 MM

Oil filling

Connect battery cable

Fuel tank filling

OPERATION

Operation – STOP

Oil change

Air filter

Spark plug change

• STANDARD : BPR4ES ( NGK)
  ESPACIADO/GAP : 0,7 – 0,8 mm

TECHNICAL DATA

Certificate of conformity ****

GRV POWER PRODUCTS, S.L.
 Manufacturer
Hereby certifies that the following
Generator
K4000S, K4000S-DF K8000, K10000E, K10000TE-T, K10000TET-DF
Is in compliance with the specifications of the machine directive and subsequent modifications
2016/1628 Emission EURO 5 Directive
Guaranteed Sound Power Level 96dB (Lwa)
2000/14/EC (amended 2005/88/EC) Sound Level Directive
2015/863 (amended 2011/65/EU) RoHS Directive
2014/30/EU (EMC) MC Directive
2006/42/EC (MD)Machine Directive
Emisiones EURO5 e242016/16282017/656SYB1/P005300 engines 420 and 459cc
Emisiones EURO5 e242016/16282017/656SYA1/P005000 engine 208cc
Conforms with the following standards
EAN ISO 3744:2010, ISO8528-10:1998 (sound level)
EN 55012:2007+A1:2009 and EN 61000-6-1:2007 (EMC)
EN ISO 60204-1:2006/AC:2010EN ISO 5395-2: 2013
EN ISO 8528-13:2016

GRV Power Products, S.L.
Avda. Alguema, 8A
17771 Sta. Llogaia Alguema, Spain
April 2021 Xavier Soteras
Managing Director
Imported by:
GRV POWER PRODUCTS, S.L.
Av. Àlguema, 8A
17771 Santa Llogaia d’Àlguema (Girona)
T: (+34) 972 673 836
www.grvpower.com

References

• GRV Power Products – Generadores y herramientas industriales

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>