HERRBOL S9 3 In 1 Wireless Charger User Manual

June 1, 2024
HERRBOL

HERRBOL-LOGO

HERRBOL S9 3 In 1 Wireless Charger

HERRBOL-S9-3-In-1-Wireless-Charger-PRODUCT

Specifications:

  • Model: S9
  • Brand: HERRBOL
  • Input: 9V 2A
  • Output: 7.5W (iPhone)
  • Output: 3W (Earphone)
  • Output: 2.5W (iWatch)

Product Information:

This product is a 3-in-1 wireless charger that allows you to charge three devices simultaneously. It offers an effortless charging experience, eliminating tangled cords.

Product Appearance:
This wireless charger has dedicated charging areas for iPhone, iWatch, and AirPods.

Operation Steps:

  1. Power on the device using the provided fast adapter and Type-C charging cable.
  2. When charging, the LED indicator flashes red and blue alternately before turning blue for charging iPhone. No light indicates charging for iWatch and AirPods.
  3. To charge devices, place them on the corresponding areas and remove them when done.

Indicator Status:

State Power on prompt
Standby iWatch and AirPods charging
iPhone charging FOD

Accessory List:

  • 3 in 1 wireless charger x 1
  • Type-C charging cable x 1
  • 18W adapter x 1
  • User manual x 1

Compatible Models:

  • iPhone: iPhone 12/13/14/15 series
  • iWatch: Apple Watch Ultra/SE/9/8/7/6/5/4/3/2
  • AirPods: AirPods 2 (with wireless case)/AirPods Pro/AirPods Pro 2/AirPods 3

Product Usage Instructions

Step 1: Power On
Connect the wireless charger to power using the provided fast adapter and Type-C charging cable to turn it on.

Step 2: Charging Devices
Place your iPhone, iWatch, or AirPods on the corresponding charging area for each device. The LED indicator will show the charging status as described in the manual.

Step 3: Removing Devices
When your devices are fully charged or you want to stop charging, simply take them away from the charging area.

Product Introduction

Thank you for purchasing our product! This product is a 3-in 1 wireless charger. One wireless charger to charge 3 devices simultaneously, bring you an effortless charging experience, no more tangled cords trouble.

Product Appearance

HERRBOL-S9-3-In-1-Wireless-Charger-1

Operation Steps

  1. At first, please power on the device by our equipped fast adapter and Type-C charging cable.
  2. When starting charging, the LED indicator light flashes red and blue alternately 3 times and then goes out. The blue light stays on when the phone is charging and turns off when fully charged. There is no light on when the AirPods and iWatch are charging.
  3. When charging devices such as iPhone iWatch AirPods, just place these devices on the corresponding charging area and they will be charged only after 0.1 second. When the devices are full charged or you want to stop charging, just take them away from the charging area.

Indicator Status

State LED Indicator
Power on prompt Red and Blue flash for 3 seconds
Stand by No light
iWatch and AirPods charging No light
iPhone charging Blue light on
FOD Blue and red light alternately flashes

Product Parameters

  • Model: S9
  • Brand: HERRBOL
  • Input: 9V 2A
  • Output: 7.5W(iPhone)
  • Output: 3W(Earphone)
  • Output: 2.5W(iWatch)

Accessory List

  1. 3 in 1 wireless charger * 1
  2. Type-C charging cable * 1
  3. 18W adapter * 1
  4. User manual * 1

Compatible Model

  1. iPhone
    For Apple: iPhone 15/iPhone 15 Pro/iPhone 15 Pro Max/iPhone 15 Plus/iPhone 14/iPhone 14 Pro/iPhone 14 Pro Max/iPhone 14 Plus/iPhone 13 mini/iPhone 13/iPhone 13 Pro/iPhone 13 Pro Max/iPhone 12mini/iPhone 12/iPhone 12 Pro/iPhone 12 Pro Max
    (Note: Magnetic charging of cell phones is only applicable to iPhone 12/ 13/14/15 series)

  2. iWatch
    Apple Watch Ultra / Ultra2 / SE / 9 / 8 / 7 / 6 / 5 / 4 / 3 / 2

  3. Earphone
    AirPods 2 (with wireless case) / AirPods pro / AirPods pro 2 / AirPods 3
    Note: AirPods 2/3 come in 2 versions. Make sure to use them with a wireless charging case.

FAQ

  1. Please put the iPhone iWatch AirPods at the center of charging area.
  2. To achieve the fast charging,please use the 18W adapter we equipped on package .
  3. The charging distance is 2 to 4mm, the thickness of the protective cover should not be thicker than 4mm(magnetic metal will affect the charging stability. Please do not place metal in the center of coil end)
  4. The watch has temperature control when the temperature reaches 45℃,which will stop charging automatically. It will continue to charge when the temperature is normal.
  5. The lower temperature is, the faster charging speed is. The charging speed is faster in winter than in summer.
  6. Please don’t charge in high temperature and humid environments to avoid damage of circuit.
  7. Put it at the place that children can’t reach to avoid unnecessary accidents.
  8. Please place the charger away from flammable and explosive liquids or gases.
  9. If you have any problems on this wireless charger, please feel free to contact the seller service, we will offer you a best solution within 24 hours. Your safety and experience is our top priority, we got it all covered.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must acceptany interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is device.
  • Consult the dealer or an experienced radio/TV technician for help.

IC Warning

This device contains licence-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:
This device contains licence-exempt transmitter(s)/receiver(s)/ that comply with Innovation Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. this device may not cause interference and
  2. this device must accept any interference, including interference
    that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This equipment should be. installed and operated with minimum distance of 10cm the radiator your body.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

After-sale Service

If there are any issues with the item, please contact us through the Amazon Message Center or at support support@herrbol.com.
In order to deal with problems more efficiently for you, please prepare the following information: the issue of charger, your devices’ model, the type of adapter and the phone case you are using, and if possible you can attach a picture or video of the problem.

FAQ

Where should I place my devices on the charger?

Please put the iPhone, iWatch, and AirPods at the center of the charging area.

How can I achieve fast charging?

To achieve fast charging, please use the provided 18W adapter.

What is the charging distance?

The charging distance is 2 to 4mm. Make sure the protective case thickness is within this range for optimal charging.

What if I encounter issues with the wireless charger?

If you have any problems with the wireless charger, please contact our customer service for assistance. We aim to provide a solution within 24 hours to ensure your safety and satisfaction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals