Godox 705-VSSRX0-02 Virso SRX 2.4GHz Wireless Microphone System Instruction Manual

Godox 705-VSSRX0-02 Virso SRX 2.4GHz Wireless Microphone System

• Godox Audio WeChat Official Account
• Overseas Official Accounts & Updates

G0D0X Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street. Bao’an District, Shenzhen 518103, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com

Forward
Thank you for purchasing’ Virso SRX is the upgraded receiver for Sony cameras that transmits audio using 2.4GHz wireless frequency, with the characteristics of compact and portable, powerful functions. It’s suitable for live streaming, interviews, lecturing, video recording, etc. Please read this manual carefully before using it to ensure the correct operation and exert the optimum function.

Main Features

• Globally universal 2.4GHz wireless frequency, which can be used in WIFI and Bluetooth simultaneously.
• The maximum wireless transmission distance is up to 200m.
• Clear and stable sound quality, noise reduction function.
• Output volume adjustment and silent function are available.
• Convenient matching and stable receiving.
• The display on the receiver shows the parameters setting and independent pickup function.
• The screen rotation function facilitates use at different angles.
• Freely switch mono/stereo/safety track to offer more output options.
• With a hotshoe back clip that can be directly connected to Sony cameras.

Warning

• This product is a high-precision instrument, please avoid falling, collision, or pounding.
• Do not disassemble. Should repairs become necessary, this product must be sent to our Company or an authorized maintenance center.
• Always keep this product dry. Do not use it in rain or damp conditions.
• Do not leave or store this product in the environment of direct sunlight, near heating devices, or in hot, humid, or dusty.
• Keep out of reach of children.
• Do not use it in flammable and explosive environments. Pay attention to the relevant warning signs.
  • Do not leave or store the product if the ambient temperature reads over 50°C.
  • Please read carefully and follow the warnings or instructions provided by the manufacturer.

Structure of Product

Transmitter (Virso TX)

1. Battery Level Indicator
2. Pairing Indicator
3. Recording/Mute Indicator
4. Power Switch/Mute Button
5. Built-in Microphone
6. Recording/Pairing Button
7. Reset Hole
8. Charging Points
9. Back Clip
10. 3.5mm Audio Input Port
11. Type-C Port
12. SD Card Slot

Receiver (Virso SRX)

1. A Group Pairing Indicator
2. B Group Pairing Indicator
3. Select/Confirm Dial
4. 3.5mm Audio Output Port
5. Display
6. Power Switch/Return Button
7. Menu Button
8. Hotshoe Back Clip
9. Type-C Port
10. Reset Hole
11. Microphone

Display

1. Sound Track Icon
2. Noise Reduction Icon
3. Receiver’s Battery Level Indicator
4. A/B Group Icon
5. A/B Signal Icon
6. A/B Transmitter’s Battery Level Indicator
7. Recording Icon
8. A/B Microphone Icon
9. A/B Volume Icon

What’s inside

Note: Due to continuous updates and upgrades of the products, there may be differences between the actual products and the pictures. Therefore, the pictures are for reference only.

Operation Instruction

Transmitter (Virso TX)

Indicators Instruction

Battery Level Indicator

• The indicator will be constant on blue after powered on.
• The indicator will be constant on red when the battery level is below 10%, while blue when the battery level is above 10%.
• The indicator will be constant on yellow in charging, then turn to green after fully charging.

Pairing Indicator

• The indicator will be off when the transmitter is powered on but unpaired. flash blue in every 0.5s when pairing. It will be constant on blue after paired, or off after pairing failed.

Recording/Mute Indicator

• The indicator will flash red every 0.5s when recording, and turn off when not in recording.
• The indicator will be constant on red in mute mode, and turn to its original color when mute mode is off.
• Turn on the recording function in mute mode, the indicator will flash red for 3s and then be constant on red.

Indicators instruction in connecting to the computer

• The U disk is closed: the battery level indicator will be constant on orange (charging mode).
• The U disk is open: the battery level indicator will be constant on red, the pairing indicator will be off and the pairing function will be turned off.
• If you press the recording/pairing button to record when connected to a computer, the recording/mute indicator will be constant on red and the pairing function will be turned on.

Buttons Instruction

Power Switch/Mute Button

• Long press for 2 seconds to turn on or off the device, short press to turn on or off mute mode.

Recording/Pairing Button

• Short press to turn on or off the record mode(the audio files will automatically back up), and long press to start pairing.

Computer-triggered Storage

• It will enter charging mode by default after connecting to the computer with a Type-C data cable, then short press the power switch/mute button, and the computer will recognize the storage function and eject the U disk.
  Note: Recording is not available when the U disk is open, and the U disk can not be opened when recording. Open the U disk, the “RECORD” folder is the recorded files saved, and the “RECINFO” TXT file is the information related to the recorded files. This product records and saves 255 files in recycle by default (001-255), after which it will be overwritten from the first file.

• Note: To ensure that the recorded files are not lost, it is recommended to delete certain old files after more than 255 files are saved. If the largest numbered file is deleted (e.g. the 255th), the next file will be saved sequentially (the 255th). If you delete the first or middle numbered file (e.g. 1st or 100th), the next file will be saved from the beginning (1st). Make sure the memory card has enough space to store the files. If the above requirements are not met, abnormalities may occur. The recorded files are in WAV format, and there will be one file stored when the recording function is triggered once. The default duration of an audio file is 30 minutes. In case of less than 30 minutes, it will still be stored as one file. If it exceeds 30 minutes, the exceeded part will automatically be stored as another file.

Restore to Factory Setting
Slightly stab the reset hole to reset the transmitter, it will shut down after resetting.

Note: If the transmitter cannot be turned on due to long-term idle use or other reasons, put it into the charging case or connect to a power source via a Type-C port, take it out after the device has been charged, then press and hold the power switch button for 10 seconds to reset.

Receiver (Virso SRX)

Indicators Instruction
The A/B group pairing indicator will be constant on blue after the A/B group is paired respectively, and off when the A/B group is unpaired or disconnected.

Buttons Instruction

Power Switch/Return Button

• Long press to turn on or off the device. A short press in the menu interface can return to the main interface, while a short press in the main interface can realize screen rotation.

Menu Button

• Short-press it in the main interface to enter the menu interface. Long press the power switch/return button and the menu button at the same time for 4s, “Resetting” will display on the panel, then the receiver will reboot after resetting. Short press it in the menu interface and can return to the main interface.

Select/Confirm Dial
Short press in the main interface to adjust volume quickly, while turn and short press in the menu interface can set and adjust functions.

Functions Instruction

Backlight
Short press the menu button to enter the menu interface, turn the select/confirm dial to backlight and short press to enter backlight setting, then turn the select/confirm dial to adjust backlight time (10s/30s/60s) and short press to confirm the setting, finally short press the power switch/return button or menu button to return to the main interface.

Track

• Short press the menu button to enter the menu interface, turn the select/confirm dial to track and short press to enter track setting, then turn the select/confirm dial to switch track (Stereo/Mono/Safety) (Safety is -6dB and only in Mono mode) and short press to confirm the
  setting, and finally short press the power switch/return button or menu button to return to the main interface.

Volume

• Short press the menu button to enter the menu interface, turn the select/confirm dial to volume and short press to enter volume setting, then turn and short press the select/confirm dial to choose A/B group volume, continue to turn it to adjust A/B group volume (turn clockwise to increase while counterclockwise to decrease from Oto 20), short press again to confirm the setting, finally short press the power switch/return button or menu button to return to the main interface.

Language

• Short press the menu button to enter the menu interface, turn the select/confirm dial to language and short press to enter language setting, then turn the select/confirm dial to switch language between Chinese and English, and short press to confirm the setting, finally short press the power switch/return button or menu button to return to the main interface.

Pair

• Short press the menu button to enter the menu interface, turn the select/confirm dial to pair and short press to enter pair setting, then turn the select/confirm dial to choose A/B group and short press to start pairing, “Pairing” will display on the panel, then Short press the menu button to “Pairing Success· will display if paired, otherwise “Pairing failed” will display in case unpaired, finally short press the power switch/return button or menu button to return to the main interface.

Denoise

• Short press the menu button to enter the menu interface, turn the select/confirm dial to denoise and short press to enter de noise setting, then turn the select/confirm dial to switch on or off the denoise function, and short press to confirm the setting, finally short press the power switch/return button or menu button to return to the main interface.

Mic

• Short press the menu button to enter the menu interface.  Turn the select/confirm dial to mic and short press to enter the mic setting, then turn the select/confirm dial to switch mic(TX/RX/TX+RX) and short press to confirm the setting, finally short press the power switch/return button or menu button to return to the main interface.

If you select TX+RX in mono mode, the transmitter will be A channel and the receiver be B channel. If you select TX+RX in stereo mode, the transmitter and The receiver will be left and right tracks. The safety mode is the same as the mono mode.

Restore to Factory Setting

Long press the power switch/return button and menu button at the same time for 4s, “Resetting” will display on the panel, and then the receiver will reboot after resetting. Or slightly stab the reset hole to reset the receiver, it will shut down after resetting.

Note: If the receiver cannot be turned on due to long-term idle use or other reasons, connect to a power source via a Type-C port, take it out after the device has been charged, and then press and hold the power switch button for 10 seconds to reset.

Installation Instruction

1. insert the omnidirectional lavalier microphone into the transmitter’s 3.5mm audio input port, and clip the transmitter onto the belt. Or use the built-in microphone directly with the transmitter clipped onto the collar.
2. Connect the receiver to Sony cameras through a hotshoe back clip, then use it together with the transmitter.
   Note: If you want to use cameras from other brands, connect the receiver and camera via the 3.5mm TRS-TRS audio cable then use it with the transmitter.

Technical Data

Type- C Input

Parameters

| 5V/0.32A| 5V/0.45A
Battery Life| approx 13h| approx 17h
---|---|---
Working Environment

Temperature

| -10°C~50″C
Working Range| Max. wireless transmission distance is 200m
Dimension| 50X50X16mm| 52XS0X16mm
Net Weight| 33g| 40g

• Specifications and data may be subject to changes without notice.

Troubleshooting

Unable to receive audio signal.
Make sure batteries are installed correctly and the Power Switch is turned on. Check if the transmitter and the receiver are set to the same channel, if the microphone or earphone is well connected, or if the devices are set to the correct mode. Check if the transmitter is set to mute mode or not.

Signal disturbance or shooting interference.
Change a different channel of the transmitter and receiver.

Operating audio distance limited or signal missing.
Check if the batteries are exhausted. If so, replace them.

Maintenance

• Avoid falling. Strong collision or vibration may malfunction the device.
• Keep dry. This product is not water-proof. Malfunction, rust, and corrosion may occur and go beyond repair if soaked in water or exposed to high humidity.
• Avoid sudden temperature changes. Condensation happens in sudden temperature changes such as the circumstance when taking the product out of a building with a higher temperature outside in winter. Please put the product in a handbag or plastic bag beforehand.
• Keep away from a strong magnetic field. The strong static or magnetic field produced by devices such as radio transmitters leads to malfunction. Changes made to the specifications or designs may not be reflected in this manual.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Warning

• Operating frequency: 2402MHz – 2480MHz
• Maximum EIRP Power : 5dBm

Declaration of Conformity
GODOX Photo Equipment Co., Ltd. hereby declares that this eqcompliest complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. By Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. For more information on DoC, Please click this web link: https://www.godox.com/eu-declaration-of- conformity The device complies with RF specifications when the device is used at 0mm from your body.

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and keep it. Thank you

Customer

Information

| Name| Contact Number
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:

Note: This form shall be sealed by the seller.

Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways, and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period

The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases

The guarantee and service offered by this document are not applicable in the following cases:1. The product or accessory has expired its warranty period; 2. Breakage or damage caused by inappropriate usage, maintenance, or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc; 3. Breakage or damage caused by non- authorized institutions or staff in the process of installation, maintenance, alteration, addition, and detachment;4. The original identifying information of the product or accessory is modified, alternated, or removed;5. No valid warranty card;6. Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software;7 Breakage or damage caused by force majeure or accident;8

Breakage or damage that could not be attributed to the product itself
Once met these situations are met, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories, and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion, and consumption are not the breakage within the maintenance scope solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accesso­ries, and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion, and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implement­ed according to the following

Product Maintenance Information

Product Type| Name|  |
---|---|---|---

Parts

| Circuit Board| 12| Customer sends
Battery|  | the product to
Charger. Electrical Parts etc| 12| designated site
Other Items| Battery Case, Windscreen Foam.Wind Cap,

Locking Device,

Lanyard, Tie, Velcro Tape,

| NO| Without warranty

• Godox After-sale Service Call: 0755-29609320-8062

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>