SONY ZMR1 Media Remote Instruction Manual
- June 1, 2024
- Sony
Table of Contents
- SONY ZMR1 Media Remote
- Product Information
- Product Usage Instructions
- Safety
- Use and handling
- Cleaning
- Storage conditions
- FCC and ISED Canada Notice
- Supplier’s Declaration of Conformity
- Set up your media remote
- Hardware part names
- Specifications
- LIMITED WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SONY ZMR1 Media Remote
Product Information
Specifications
- Model: CFI-ZMR1
- Battery Type: AA batteries
- Compliance: FCC and ISED Canada regulations
Product Usage Instructions
Precautions
Before using the product, carefully read the manual and ensure that all
safety precautions are followed, especially by children.
Safety
- Avoid contact with leaking battery material. If contact occurs, follow the recommended actions.
- Use only AA batteries and ensure correct insertion to prevent short-circuiting.
- Dispose of used batteries properly and remove them when not in use for an extended period.
- Keep the product away from small children.
Use and Handling
- Avoid exposure to liquid, strong shocks, or physical stress.
- Avoid disassembly or modification of the product.
- Do not place the product on unstable surfaces or on the floor.
Cleaning
- Wipe the product with a soft, dry cloth to prevent deterioration.
- Avoid using volatile substances, solvents, or chemicals for cleaning.
Storage Conditions
- Avoid exposing the product to high temperatures, humidity, direct sunlight, dust, smoke, or steam.
- Avoid leaving the product in a closed car in hot weather.
FCC and ISED Canada Notice
This product complies with FCC and ISED Canada regulations regarding
radiation exposure and radio frequency guidelines.
FAQ (Frequently Asked Questions)
-
Q: Can I use rechargeable batteries with this product?
A: It is recommended to use only AA non-rechargeable batteries to avoid potential risks due to battery type mismatch. -
Q: How should I clean the product exterior?
A: Use a soft, dry cloth for cleaning. Avoid using volatile substances, solvents, or chemically-treated cleaning cloths.
Media Remote
Precautions
Before using this product, carefully read this manual and retain it for future
reference. Parents and guardians of children should read this manual and make
sure that children follow all safety precautions.
Safety
- If you come into contact with material from a leaking battery, take the following actions:
- If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.
- If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your doctor if inflammation or soreness develops.
- Do not place batteries in water or fire. Do not disassemble, heat, modify, or charge the batteries. Doing so may cause the batteries to leak or become damaged, which may lead to injury or burns.
- Use only AA batteries. Do not combine old and new, or different types of batteries.
- Using batteries of different capacities may cause explosion or leakage, which may lead to injury or burns.
- Insert batteries in the correct direction. Batteries can short-circuit when their positive and negative ends are reversed. This may cause batteries to overheat, explode, or leak, which may lead to injury or burns.
- Dispose of used batteries according to the battery manufacturer’s instructions or local regulations.
- Remove batteries when they have reached the end of their life, or when storing the media remote for an extended period of time. Leaving them in the remote may cause leakage due to battery overdischarge, which may lead to injury or burns.
- Keep the product out of the reach of small children.
Use and handling
- Do not allow liquid or small particles to get into the product.
- Do not touch the product with wet hands.
- Do not throw or drop the product or subject it to strong physical shock. ˎ Do not stand on or put objects on the product.
- Never disassemble or modify the product.
- Do not place this product on an unstable surface or leave on the floor.
Cleaning
Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored.
- Wipe with a soft, dry cloth.
- Do not apply insecticides or other volatile substances.
- Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
- Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
Storage conditions
- Do not expose the product to high temperatures, high humidity or direct sunlight during operation, transportation and storage.
- Do not leave the product in a car with the windows closed, particularly in hot weather.
- Do not expose the product to dust, smoke or steam.
FCC and ISED Canada Notice
This equipment complies with FCC and ISED Canada radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio frequency (RF)
Exposure Guidelines and RSS-102 of the ISED Canada radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that are
deemed to comply without testing of specific absorption rate (SAR).
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
For assistance with this product, visit
playstation.com/help. The phone number in the
supplier’s declaration of conformity is only for FCC electrical interference
inquiries.
Supplier’s Declaration of Conformity
- Trade Name : SONY
- Model No. : CFI-ZMR1
- Responsible Party : Sony Electronics Inc.
- Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
- Telephone No. : 858-942-2230 (Only for FCC electrical interference inquiries)
This device complies with Part 15 of the FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
End of life product recycling
This product is made of plastics, metals, and a removable battery. Follow
local regulations when disposing of the product. Sony products can be recycled
for free in the United States and Canada by dropping the product off at a
number of nationwide locations.
For details, visit www.sony.com/ecotrade.
Set up your media remote
Turn on the power
- Press the PUSH button on the back of the media remote and remove the rear cover. Keep pressing the PUSH button until the lock disengages.
- Insert batteries with their positive and negative ends pointing in the correct direction.
- Replace the rear cover.
Align the protruded parts on the cover with the recessed parts on the media remote, and then press until you hear a “click”.
Hint
When battery charge runs low, the media remote may not operate properly or the
distance at which you can operate the remote may be reduced. When this
happens, replace both batteries with new ones.
Pair and set up your media remote
To use the media remote as a controller for your PlayStation®5 console as well
as a TV remote, you’ll need to pair the remote with your console, and then set
up the remote with your compatible TV.
Go to the home screen on your PS5™ console and select Settings > Accessories >
Media Remote > Set Up Media Remote, and then follow the on-screen instructions
to set up your media remote.
Infrared (IR) technology enables you to operate your compatible television.
For IR operation you must point the IR transmitter of the media remote
directly at the device. Check that there are no obstructions between the media
remote and the device.
Hints
- One media remote can operate only one PS5 console.
- If you switch TVs, you’ll need to reconfigure the media remote’s settings.
- Be sure to always update your PS5 system software to the most recent version.
Hardware part names
Hint
The TV volume + button and the (play/pause) button have tactile dots to help
you find the buttons easily.
Specifications
- Power source Size AA batteries (2 pcs)
- External dimensions Approx. 1.8 × 5.7 × 1.0 in (45 × 145 × 26 mm) width × height × depth
- Weight Approx. 1.9 oz (55 g) without batteries
- Operating temperature 41 °F to 95 °F (5 °C to 35 °C)
Design and specifications are subject to change without notice.
LIMITED WARRANTY
- Sony Interactive Entertainment LLC (“SIE LLC”) warrants to the original purchaser that this product shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty does not apply to any consumables (such as batteries). For defects in material or workmanship within the warranty period, upon showing a proof of purchase, SIE LLC agrees for a period of one (1) year to either repair or replace this product with a new or factory recertified product at SIE LLC’s option. For the purpose of this Limited Warranty, “factory recertified” means a product that has been returned to its original specifications. Visit playstation.com/help or call 1-800-345-7669 to receive a return authorization and shipping instructions. As the original purchaser, you will be responsible for inbound shipping costs and any packaging materials required. SIE
- LLC will then return the repaired or replaced product at no cost to you including return shipping. This warranty shall not be applicable and shall be void if the defect in the SIE LLC product has arisen through abuse, unreasonable use, mistreatment, neglect, or means other than from a defect in materials or workmanship.
- THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE SIE LLC. ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE (1) YEAR PERIOD DESCRIBED ABOVE. IN NO EVENT WILL SIE LLC BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION, USE OR MALFUNCTION OF THE SIE LLC PRODUCT. SOME STATES OR PROVINCES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.
- This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.
- This warranty is valid only in the United States and Canada.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>