Movfast MF-T1621 Intelligent Mobile Data Capture Terminal User Manual

Ranger2K

Quick Start Guide

Product Feature

Function Quick Guide

① Front Camera
② Function Button
Setup shortcut function in [Setting]—[Key Map] ③ ⑦ ⑧ Scan Button
Press the button to scan the 1D/2D Barcode
Caution: Bright Light, Do not Aim or Align the scanner with eyes!
④ Scanner Window
Caution: Bright Light, Do not Aim or Align the scanner with eyes!
⑤ Earpiece
⑥ Screen
⑨ Keyboard
Power Button
Short Press: Wake up/Lock the device
Long Press: Device is Off: Press and Hold 2-3 seconds to Turen On the device
When Device is On: Press and Hold 2-3 Seconds to open the page of select Restart
or Restart
Forced Reboot: Press and Hold 9 seconds to Reboot the Device when system crashes
⑩ Extension PIN (8 Pins)
For related accessories connection
⑪ Battery Case
⑫ Back Cover Lock
⑬ Rear Camera
For Photo taking and 1D/2D Barcode scanning
⑭ 2 Pin Bottom Connection
⑮ USB-Type C
⑯ NFC
⑰ Sim Cards Slot (Support 2 Sim Cards)
⑱ Flashlight
⑲ TF Card Slot

Keyboard

Numeric Key: 1\2\3\4\5\6\7\8\9\0\.
Function Section| | Direction Key: Screen brightness up/down \ Volume up/down
Numeric Key: F1/F2/F3/F4/F5/F6/F7/F8/F9/#/*
Case Switching| | Direction Key: Left\Right\Up\Down
Numeric Key: Upper Case: Punctuation \ ABC\ DEF\ GHI\ JKL\ MNO\ PQRS\ TUV\ WXYZ\ Space\ Punctuation
Lower Case: punctuation(@ : /) \ abc\ def\ ghi\ jkl\ mno\ pqrs\ tuv\ wxyz\ Space\ punctuation(. , ; : ? + -)

Feature

MovFast item

| Parameters
---|---

Dimensions

| 159mm x 68.5 mm x 17 mm

Weight

| ~260g

Operating Temperature

| -20℃ ~ +50℃

Humidity

| 5%~95% Non-condensing

Drop Resistance

| 6 side * 30 times droups for 1.5m

Ingress Protection

| IP67

Sensors

| Acceleration sensor, light sensor, and proximity sensor, E-Compass, Gyroscope.

Runtime

| more than 10 hours, Support continuous scanning more than 24,000 times

Processor

| MTK high-performance 8 cores 4A53@2.0GHz+4A53@1.5GHz

OS

| Android 13

Wi-Fi

| IEEE 802.11 a/b/g/n/ac

Resolution

| 480*800

Software

Barcode Utility| The application of scanning and decoding.
Effectively recognizing, outputting the corresponding code, verification information
---|---
MovStage| MovStage helps users easily batch configure multiple PDA devices, with installing applications, configuring setting and Kiosk application .etc functions. This tool increases efficiency, reduces repeat work and errors in manual operations.

Kiosk

| Provide the user with a dedicated, functionally limited single application mode.
Limit PDA devices to workstations dedicated to a specific application. Provide the user with a tool that provides security, privacy and ensures that the user is focused on a specific application.

Notice

Safety

*Charging
Connect the device with the plug or the socket corresponding to the marked input of the power adapter; To avoid injury, unauthorized person shall not open the power adapter;
This product may cause radio interference in living environments. In that case, the user may be required to take adequate measures against interference.

Significant Safety Instructions

• Do not install or use the device during lightning storms to avoid the potential risks of lightning shock;
• To avoid the damages of eyes and safety, Do not Aim or Align Scanner with eyes；
• Please turn off the power immediately if you notice abnormal odor, heat, or smoke;

Suggestions

• Do not use the device near water or moisture to prevent liquid from falling into the device;
• Do not use the device in extremely cold or hot environments, such as near flames or lit cigarettes;
• Do not drop, throw or bend the device;
• Use the device in a clean and dust-free environment if possible to prevent small items from falling into the device;
• Please do not use the device near medical equipment without permission;
• The operating temperature should be-20°C~50°C.

Statements

Movfast does not assume responsibility for the following actions:

• Damages caused by use and maintenance without complying with the conditions specified in this guide;
• Movfast will not assume any responsibilities for the damages or problems caused by optional items or consumables (rather than the initial products or approved products of Movfast ). The customer\users is not entitled to change or modify the product without our consent.
• The product’s operating system supports official system updates from Movfast, but if you change the operating system into a third party ROM system or alter the system files by system cracking, it may cause system instability and security risks and threats.

Disclaimer

As a result of product upgrading, some details in this document may not match the product, and the actual product shall prevail. Movfast reserves the right to interpretation of this document. Movfast also reserves the right to alter this document without prior notice.

PRODUCT SAFETY WARNINGS

PRODUCT SAFETY WARNINGS

To prevent possible injury, please read all instructions and safety information before you use the product.
Operating temperature: -20°C ~ 50°C
Storage temperature: -40°C ~ 70°C

Battery & Safety

• Charge battery only at ambient temperatures ranging from 0°C to 40°C.
• Please do not attempt to repair, disassemble or modify the battery. Do not place or use battery near fires, heaters, direct sunlight, or other heat sources. Prolonged exposure to heat may cause battery leakage, explosions, or fires.
• Please do not place pressure on or pierce the battery with hard objects. Damaging the battery could cause battery leakage, overheating, or fires.
• Battery liquid may cause damage to skin or clothes. If exposed, immediately wash skin with water and seek medical attention.
• If you experience any battery abnormalities, such as high temperature, discoloration, distortion, or leakage, immediately discontinue usage of the device and contact customer support.
• If the battery’s internal liquid comes in contact with your eyes, rinse thoroughly and immediately seek medical attention.
• Do not connect your device to a high-voltage power supply or the battery could become damaged.
• All batteries have a li ited lifespan and will begin to lose capacity after several hundred charges/discharges.
• Do not dispose of the battery as household waste. Please refer to local regulations.

| The equipment meets the requirements of the relevant regulations and standards of the European Economic Area.CE marking is a harmonized certification system set up by the European Union in order to ensure that products meet the basic requirements for safety, health and the environment during their free circulation and sale in the European market.
---|---
| The device has been tested and evaluated by the Federal Communications Commission (FCC) and complies with the relevant radio spectrum and electromagnetic compatibility requirements in the U.S. FCC certification ensures that the device is legal for sale and use in the U.S.

Radio Waves specs

Radio

| Frequency| Max.Output Power(dBm)
GSM| 900MHz|

32.2

1800MHz

|

28.9

WCDMA

|

FDD I

| 21.47
FDD VIII|

21.97

E-UTRA FDD

|

FDD 1

| 23.38
FDD 3|

23.08

FDD 7

| 22.68
FDD 8|

23.23

FDD 20

| 22.88
E-UTRA TDD| TDD 34|

22.69

TDD 38

| 23.38
TDD 40|

23.1

BT(classic)

| 13.4
BLE|

1.0

WIFI(2.4G)

| 18.70
WIFI 5G Band 1|

18.90

WIFI 5G Band 2

| 19.10
WIFI 5G Band 3|

19.00

WIFI 5G Band 4

|

13.80

Hereby, [Shanghai Xiangcheng Communication Technology Co., Ltd] declares that the radio equipment type ]Intelligent Mobile Data Capture Terminal] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://www.xchengtech.com/
Caution risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Excessive sound pressure from earphones and headphones can cause hearing loss.

|

BE

| BG| CZ| DK| HU|

MT

---|---|---|---|---|---|---

DE

| EE| IE| EL| NL| AT
ES| FR| HR| IT| PL|

PT

CY

| LV| LT| LU| SK| FI
RO| SI|

SE

| | |
Note: In all EU member states, operation of 5150-5250MHz is restricted to indoor use only.

RF exposure statement

The SAR limit of Europe is 2.0 W/kg. Device types T16/T1621/Ranger2K has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is XX W/kg and when properly worn on the body is XX ‘W/kg. This device was tested for typical body-worn operations with the back of the handset kept 5cm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 5cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

The SAR limit set by the FCC is 1.6 W/Kg.. Device types T16/T1621/Ranger2K has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.53 W/kg and when properly worn on the body is 0.79 W/kg. This device was tested for typical body-worn operations with the back of the handset kept”‘ Omm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain al Ommseparation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided.

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

K7612000346LA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>