QMLALA LYTZ Rainfall Shower Head Combo Installation Guide
- June 1, 2024
- QMLALA
Table of Contents
QMLALA LYTZ Rainfall Shower Head Combo
Before Installation
inclusive Parts: Instruction Includes Information on proper installation and maintenance. Please read the instructions carefully before installing the products. The actual product might be slightly different In appearance, but same In structure. For better accuracy, please refer to the actual object.
Inclusive Parts
Features
Products can be easily installed without any tools and can be done in a few simple steps.
Attention:
- Using Teflon tape to wrap around male pipe thread adapters to allow for a tighter connection, preventing leaks and ensuring a tight seal.
- Wrap threads tightly to pull into the threads, overlapping about half the tape-width. Wrap to end of threads but not beyond to avoid causing obstruction. Fittings will tighten and loosen naturally without additional effort; If fitting is removed simply replace tape
Installation Instructions
Steps:
- Wrap the male pipe thread adapter with Teflon tape and make sure there is a washer inside (Missi’g the washer could cause leek)
- Screw 1he 3-way water diverter to the shower arm (notice the direction};
- Attach the extension arm to the rainfall shower head and hose (notice 1he direction);
- Adhere the shower head mount in the proper position, then )00 can hang up your shower.
- Tips for installing the adhesive: Please dry your wall completely before you install the adhesive bracket, and leave the adhesive on the wall for 24 hours without putti~ the shower head on it .
(We have added a backup adhesive for the shower mount in case your case couldn’t adhere to the wall)
Install with Extension Shower Arm
Please note
Do not install the hose on the contrary. The screw head should be connected to the shunt and the other end should be connected to the flow regulator (Warm tips:Before placing the adhesive mount on the wall, you can try to hang the hand shower on the mount to check if it has been installed oppositely, if you do, you can try to install it in the correct way again without wasting the shower bracket.)
Cleaning and Maintenance
- Many active ingredients in cleaning agents such as ammonia, detergent powder and toilet cleaners may destroy the coating of the product. For best results, please use mild soap and dry thoroughly with a soft cloth.
- Do not use abrasive cleaning materials on Lordear Products.
- Pease follow the steps below if vou experience dirt blocking the flow of the water after some time.
- A. Turn on the water and poke the holes with your fingers to gently to loosen minerals and release any remaining sediments.
- B. Tum off the water, remove the shower head and the mesh washer inside to clean with a small brush.
Manufacturer:
Guangzhou Baomei Network
Technology Co., Ltd.
Address:
Rm 310, Weiye Bldg 5, No.1,
Erheng Rd W. Zone,
Hebiantongda CP, He long St.
Baiyun Dist, Guangzhou
CHINA; 510000
After-sa les-service-e-mail:
gzbaomei20l6@hotmail.com
Name: Rainfall Shower Head Combo
Model: LYTZ
We stand behind the quality of our product, if you have any problem about our products, please don’t hesitate to contact us.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>