Suprocky AP1408P Wall Return Air Pathway Kit with Filter User Manual
- June 1, 2024
- Suprocky
Table of Contents
Suprocky AP1408P Wall Return Air Pathway Kit with Filter User Manual
INSTALLATION AND USER MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.
PLEASE KEEP THIS INSTRUCTION WELL AND DO NOT DESTROY OR LOSE IT.
The Suprocky Zone Air Pathway is designed to allow the user to keep the
temperature and humidity balanced in both rooms while the door is closed.
Works better with Suprocky ventilation products.
R 888-907-7328
4% www.suprocky.com
s Suprocky Product Co., Ltd
Note:
- Before installation, please carefully check the location of the pipeline in the wall, and be sure to avoid the pipeline openings to prevent cutting the pipeline and causing harm to the person and electricity.
- Make sure the stud you are cutting is not load-bearing. If it is, you will need to find a new location.
INSTALATION
Step 1: Select the area where you want to install Zone Air Pathway.
AP1204():300mn
Using your stud finder, check to see if there F:Eiféfilfi%@%fi{ are any studs
in the way. If there is a stud, APT408(F):350mm you will need to cut the stud
to make room for the box.
With the help of a tool that can make the device horizontal and vertical, find
a good positioning point and draw the corresponding dotted line with reference
to Hole Dimensions. (See Figure 1)
Step 2: Using a plasterboard saw, cut along the lines and remove the cut down
plasterboard. (See Figure 2)
Step 3: Using a plasterboard saw or awl, poke through the corners of the cut, keeping the tool straight through the back of the drywall. Repeat this step at each corner. (See Figure 3)
Step 4: Put the ladder on the other side of the wall, you will notice the 4
holes you just poked. Take a box with long openings on all sides (the larger
one in the box) and line up the corners with the holes you made above the
doorway. Once the boxes are lined up, draw a rectangle on the outside of the
box. (See Figure 4)
Step 5: Use a plasterboard saw, cut along the lines, and remove the
plasterboard. (Repeat Figure 1)
Step 6: Take the first box and insert it into the first hole you cut out. Take
box #2, put the baffle back in the box, and insert it into the second hole you
cut, followed by the filter element. (See Figure 5)
Step 7: Use the provided grill screws to tighten one grill on each side. Make
sure the grill is in place before tightening the screws. (See Figure 6)
5 YEARS WARRANTY
Suprocky warrants to the original purchaser of this product that the product
will be free from defects due to faulty material or workmanship for a period
of (5) years from the date of original purchase or delivery to the original
purchaser, whichever is earlier.
Remedies under this warranty are limited to repairing or replacing, at our
option, any product which shall, within the above stated warranty period, be
returned to Suprocky at the address listed below, postage prepaid. THERE
ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, AND
SUPROCKY EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING FROM THE USE OF THIS PRODUCT.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND NO AGENT IS
AUTHORIZED TO ASSUME FOR US ANY LIABILITY ADDITIONAL TO THOSE SET FORTH IN
THIS LIMITED WARRANTY. IMPLIED WARRANTIES ARE LIMITED TO THE STATED DURATION
OF THIS LIMITED WARRANTY. Some states do not allow limitation on how long an
implied
warranty lasts, so that limitation may not apply to you. In addition, some
states do not allow the exclusion or limitation of incidental or consequential
damages, so that above limitation or exclusion may not apply to you. This
warranty gives you specific legal rights and you may also have other rights
which may vary from State to State. Send all inquiries regarding warranty work
to Suprocky.
Warranty register code
support@suprocky.com 888-907-7328
(10.00 AM to 7.00 PM PST), Monday to Friday.
Suprocky Product Co., Ltd