PANTHER VISION POWERPAW 600 Waterproof Rechargeable Hand Warmer Instruction Manual

PANTHER VISION POWERPAW 600 Waterproof Rechargeable Hand Warmer

Product Information

The POWERPAW Hand Warmer is a rechargeable device that provides heat to keep your hands warm in cold weather. It has four temperature levels and a battery charge indicator. The hand warmer comes with a USB cable for charging and a micro USB connector.

QUICK START

• A: CHARGE LED
• B: USB PORT
• C: USB MICRO CONNECTOR
• D: CHARGE LEVEL LEDs (when charging)
• E: POWER BUTTON
• F: USB A CONNECTOR
• G: UL LISTED CLASS 2 POWER UNIT* (not included)

Charging

Fully charge POWERPAW battery before first use.

• Open Cap. Insert micro USB plug. Plug into USB charger.
• When charging, the Charge LED will be Red.
• When fully charged, the Charge LED will turn Green.
• After charging, remove USB plug and close cap.

Operation:

• Press the button to turn on heater.
• Press button again to select higher temperature.
• There are 4 temperature levels.

Approximate heater temperature

• 1 LED = 100°F / 37.8°C
• 2 LED = 110°F / 43.3°C
• 3 LED = 120°F / 48.9°C
• 4 LED = 130°F / 54.4°C
• No LEDs = OFF

DETAILED INSTRUCTIONS

If the battery is too hot (45C) or too cold (0C) to be charged, the charge LED will flash red. Once the battery reaches a safe charging temperature, the battery will start charging.
If all 4 of the power level LEDs are flashing there is a problem with the temperature sensor or heating element. Contact us at 847-783-5900 ext. 107 for a replacement POWERPAW.

Charging:
Open Cap. Insert micro USB plug. Plug USB cable into USB charger.

When charging:
The Charge LED will be Red. The Charge Level LEDs will show the charge level:

• 1st LED flashing ……………………………………………..0 to 25% charged
• 1st LED on and 2nd LED flashing ……………………….25 to 50% charged
• 1st and 2nd LED on and 3rd LED flashing ……………50 to 75% charged
• 1st, 2nd, and 3rd LED on and 4th LED flashing ……..75 to 100% charged

When fully charged:
The Charge LED will turn Green and all 4 of the Charge Level LEDs will be on. After 5 minutes, the 4 Charge Level LEDs will turn off and only the green Charge LED will be on. After charging, remove USB plug and close cap.

Operation:
Press the power button to turn on the POWERPAW heater. When the POWERPAW is turned on, the Charge Level LED will show the battery charge level.

• 1 red flash less than 25%
• 2 red flashes 25 to 50%
• 3 red flashes 50 to 75%
• 4 red flashes 75 to 100%

Press button again to select a higher temperature. There are 4 temperature levels:

HELPFUL TIPS

• Using lower temperature settings often provides suffcient warmth and prolongs battery life.
• Using a 2amp USB charger and the provided 2amp charging cord will fully charge the heater in 4 hours. If you experience longer charging times, check to make sure your USB charger is rated for at least 2 amps.
• The POWERPAW heater is only waterproof if the cap is securely closed.

IMPORTANT SAFETY WARNINGS

• Do not expose the POWERPAW unit to fire or open flame.
• Batteries can explode or leak if crushed, disassembled, or exposed to fire or high temperature.
• Keep out of reach of children.
• Do not remove the silicone body covering, doing so may damage internal components causing an unsafe condition and will void the warranty.
• Operating temperature range 15°F to 90°F
• Storage temperature range 15°F to 110°F
• Charging temperature range 32°F to 100°F
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
• Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.

FCC

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.”

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

LIMITED LIFETIME WARRANTY

If any of our products ever fail because of a defect in material or workmanship, just send it to us and we will ship you a new one free of charge! Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

PanthEr VisioN®
213 W. Main Street
West Dundee, IL 60118 USA
1-847-783-5900
panthervision.com

References

• Hands-Free LED Lighting Products | Panther Vision

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>