BOSH SBH4HVX00E Fully Integrated Dishwasher User Guide
- June 1, 2024
- BOSH
Table of Contents
- BOSH SBH4HVX00E Fully Integrated Dishwasher User Guide
- etting up Home Connect
- Overview of water hardness settings
- Setting the water softening system
- Programmes
- How to use your appliance
- Cleaning filters
- Cleaning spray arms
- Clean wastewater pump
- Troubleshooting
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BOSH SBH4HVX00E Fully Integrated Dishwasher User Guide
etting up Home Connect
Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.
-
Install the Home Connect app on your mobile device and follow the instructions.
-
Scan the QR code with the Home Connect app.
http://qr.home- connect.com?aG9tZWNvbm5lY3Q6Ly9vcGVuUGFpcmluZz9wc2V1ZG9WaWI9U00wMQ==
Overview of water hardness settings
Setting the water softening system
-
Press .
-
To open the basic settings, press for 3 seconds.
a The display shows Hxx.
a The display shows set . -
Press repeatedly until the right water hardness has been set.
-
To save the settings, press for 3 seconds.
Programmes
The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. The runtime will change if the rinse aid system is switched off or rinse aid needs to be added.
How to use your appliance
-
Load the tableware.
Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely. -
Add detergent.
-
Switch on the appliance .
-
Select the programme.
-
Start the programme .
-
Remove the tableware at the end of the programme.
-
To cancel the programme, press for approx. 4 seconds.
The programme is cancelled and ends after approx. 1 minute.
Cleaning filters
Cleaning spray arms
-
Unscrew the upper spray arm and pull down to remove .
-
Pull up the lower spray arm to remove.
-
Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
-
Insert the lower spray arm.
a The spray arm clicks into position. -
- Insert the upper spray arm and screw it firmly in place.
Clean wastewater pump
Troubleshooting
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>