Joerns ULTRACARE XT Ultra Care Bed Installation Guide
- June 1, 2024
- Joerns
Table of Contents
Joerns ULTRACARE XT Ultra Care Bed
Product Information
Specifications
- Model: Ultracare XT
- Weight Capacity: 500 lbs
Frequently Asked Questions
- Q: Where can I find replacement parts for the Ultracare XT?
- A: Replacement parts for the Ultracare XT can be ordered through authorized dealers or directly from the manufacturer. Refer to the parts list in your user manual for part numbers and descriptions.
- Q: What is the weight capacity of the Ultracare XT?
- A: The Ultracare XT has a weight capacity of 500 lbs, making it suitable for a wide range of users.
- Q: How do I maintain the Ultracare XT for optimal performance?
- A: Regularly inspect all components for wear and tear, clean the surfaces as recommended, and follow the maintenance schedule outlined in the user manual to ensure optimal performance of your Ultracare XT.
Product Usage Instructions
Assembly of Actuator and Control Box
- Refer to the user manual for detailed instructions on assembling the actuator and control box.
- Ensure all components are securely fastened using the provided hardware.
- Double-check all connections before proceeding to the next step.
Mattress Support Components Installation
- Identify the mattress support components as listed in the manual.
- Follow the step-by-step instructions to install the mattress support components correctly.
- Make sure all screws and fasteners are tightened securely to avoid any instability.
Control Box Setup
- Use the provided kit to set up the control box following the detailed instructions.
- Connect all cables and wires as per the labeled instructions to ensure proper functionality.
- Test the control box after setup to verify that it is working correctly.
To avoid injury, read user’s manual before using.
FRAME COMPONENTS
76″ AND 80″ 500-LB VERSIONS
MODEL: ULTRACARE XT
*76″ MODEL HAS LIMITED SERVICE PART AVAILABILITY
| ITEM | PART NUMBER | DESCRIPTION |
|---|---|---|
| NS | 6110075 | MANUAL, USER, ULTRACARE XT (PDF AVAILABLE ON WEBSITE) |
| 1 | 39001070-M | KIT, REPLACEMENT, HI-LO GLIDE (TWO GLIDES, HARDWARE, |
INSTRUCTIONS)
2| 11012238| PIN, PIVOT, SLEEP SURFACE
3| 11012361| PIN, PIVOT, LEG/ ACTUATOR
4| 31009151| ASSEMBLY, BUMPER (BUMPER AND FASTENER)
5| 12523159| BOLT, CARRIAGE, 5/16-18 x 2″
6| 12553104| SCREW, THREADFORMING, 5/16 x 3/4″
7| 12673105| NUT, NYLOCK, 5/16-18
8| 12800032| PIN, LOCKING COTTER
9| 12809807| RING, KICKOUT
10| 12847531| WASHER, FLAT, 5/16″
11| 25005930| TUBE, HI-LO GUIDE
12| 12552592| SCREW, THREADFORMING, 1/4-20 x 5/8″
13| 39000967| KIT, CONTROL BOX (CONTROL BOX AND INSTRUCTIONS)
14| 11012449| CABLE, BATTERY BACKUP
15| 12743182| FASTENER, PUSH-IN
16| 39000874| KIT, CASTER (FOUR CASTERS, HARDWARE, INSTRUCTIONS)
17| 11011866AL| BUMPER, WALL, 15¾” (FITS 80″ BED w/ ADVANCED CONTROLS, 4° TRT)
18| 12675024| NUT, WHIZLOCK, 1/2-13
19| 12551030| SCREW, THREADFORMING, #10-24 x 1″
20| 11012662| PIN, PIVOT, STABILIZER
21| 11011331| PAD, STOP, KNEE/ LEG
22| 11012722AL| BRACKET, PANEL
24| 12553203| SCREW, THREADFORMING, 8-32 x 1/2″
25| 39001704| BRACKET, STAFF CONTROL (WAS 11012740AL)
26A| 11012990| PENDANT, STANDARD
26B| 11017334| PENDANT, STANDARD WITH HOOK
27| 11012852AL| BUMPER, WALL, 10¼” (FITS 76″ BED w/ STANDARD CONTROLS)
28| 11012851AL| BUMPER, WALL, 13¾” (FITS 80″ BED w/ STANDARD CONTROLS _or
_76″ BED w/ ADVANCED CONTROLS, 4° TRT)
29A| 11012840| PENDANT, ADVANCED
29B| 11017333| PENDANT, ADVANCED WITH HOOK
30| 11011899AL| BUMPER, WALL, 18¾” (FITS 76″ BED w/ ADVANCED CONTROLS, 12°
TRT)
31| 11012608AL| BUMPER, WALL, 22¼” (FITS 80″ BED w/ ADVANCED CONTROLS, 12°
TRT)
32| 39000968-M| KIT, ACTUATOR, HI-LO, STANDARD (ACTUATOR, HARDWARE,
INSTRUCTIONS)
33| 39000969-M| KIT, ACTUATOR, HI-LO, FAST (ACTUATOR, HARDWARE, INSTRUCTIONS)
40| 39000792-M| KIT, ROLLER AND HUB (ONE ROLLER, ONE HUB, INSTRUCTIONS)
41| 39000793-M| KIT, PENTAGON AND HUB (ONE PENTAGON, ONE HUB, INSTRUCTIONS)
48| 600-1574| SCREW, HEX, 1/2-13 x 3/4″
54| 11013253| BUMPER, STOP
85| 11011230| BUSHING, STABILIZER
NS| N107| KIT, MAINS CABLE, CLASS I (GROUNDED) (CABLE, HARDWARE, INSTRUCTIONS)
NS| N108| KIT, MAINS CABLE, CLASS II (DOUBLE INSULATED) (CABLE, HARDWARE,
INSTRUCTIONS)
NS| 39001072| KIT, CABLE, HEAD ACTUATOR (CABLE, HARDWARE, INSTRUCTIONS)
NS| 39001073| KIT, CABLE, FOOT ACTUATOR (CABLE, HARDWARE, INSTRUCTIONS)
NS| 12150025| GROUND WIRE ASSEMBLY, 5″
NS| 12150026| GROUND WIRE ASSEMBLY, 10″
NS| 12541064| SCREW, #10-16 x 1/2″
NS| 12851004| WASHER, SPLIT LOCK, #10
NS| 12851001*| WASHER, LOCK, EXTERNAL TOOTH, #10
NS| 12500013| PACKET, GREASE (ONE CC TUBE OF JOERNS-APPROVED GREASE)
NS| 11017136| PENDANT GARMENT CLIP
NS = NOT SHOWN
NOTE: GROUND WIRES (12150025 AND 12150026) AND ATTACHING HARDWARE (12541064, 12851004, AND 12851001) – REFER TO LENGTH OF WIRE ASSEMBLIES ON BED IF REPLACEMENT IS REQUIRED. ASTERISK (*) DENOTES PARTS ORDERABLE FOR CLASS I GROUNDED VERSION OF UCXT.
MATTRESS SUPPORT COMPONENTS
76″ AND 80″ 500- LB VERSIONS
MODEL: ULTRACARE XT
*76″ MODEL HAS LIMITED SERVICE PART AVAILABILITY
| ITEM | PART NUMBER | DESCRIPTION |
|---|---|---|
| 2 | 11012238 | PIN, ACTUATOR PIVOT |
| 8 | 12800032 | PIN, LOCKING COTTER |
| 21 | 11011331 | PAD, STOP, KNEE/LEG |
| 48 | 12552590 | SCREW, THREADFORMING, ¼-20 x 1½” (INCLUDED w/ SEAT PAN KITS) |
| 57 | 11014113 | PIN, CLEVIS, 12mm x 2″, HARDENED |
| 59 | 39000972-M | KIT, ACTUATOR, BACK (ACTUATOR, HARDWARE, INSTRUCTIONS) |
| 60 | 39000973-M | KIT, ACTUATOR, KNEE (ACTUATOR, HARDWARE, INSTRUCTIONS) |
| 61 | 39000980 | KIT, SEAT PAN, SOFT TONE (SEAT PAN, FASTENERS, INSTRUCTIONS) |
| 63 | 11011369AL | WIREFORM, MATTRESS STOP |
| 64 | 39001872 | KIT, KNEE/ FOOT SECTIONS, UCXT (KNEE AND FOOT SECTIONS, MATTRESS |
STOP, HARDWARE, INSTRUCTIONS)
66| 39001874| KIT, BACK SECTION, 76″, UCXT (76″ BACK SECTION, MATTRESS STOP,
HARDWARE, INSTRUCTIONS)
67| 39001873| KIT, BACK SECTION, 80″, UCXT (80″ BACK SECTION, MATTRESS STOP,
HARDWARE, INSTRUCTIONS)
68| 39000794-M| KIT, FOOT LEVELER, GATCH (ONE GATCH LEVER, RIVET REPLACEMENT
KIT, INSTRUCTIONS)
69| 39000802-M| KIT, SLEEP SURFACE BEARING (FOUR BEARINGS AND RETAINERS,
LUBRICANT, INSTRUCTIONS)
70| 39001051-M| KIT, CONTROL HARNESS (CONTROL HARNESS, FASTENERS, CABLE TIES,
INSTRUCTIONS)
71| 39000052-M| KIT, RIVET REPLACEMENT (FASTENERS TO REPLACE TWO RIVETS)
NS| 39000979**| KIT, MOTOR CABLE, KNEE (MOTOR CABLE, CABLE TIES, INSTRUCTIONS)
NS| 39001075***| KIT, MOTOR CABLE, KNEE (MOTOR CABLE, CABLE TIES,
INSTRUCTIONS)
NS| 39001074-M| KIT, MOTOR CABLE, BACK (MOTOR CABLE, CABLE TIES, INSTRUCTIONS)
NS| 39001040| KIT, NUT COVER, ASSIST DEVICE (TWO NUT COVERS, FASTENERS,
INSTRUCTIONS)
77A| 11013002AL| COVER, SEAT PAN
77B| 39002013| KIT, SEAT PAN SUPPORT (BRACKET, HARDWARE, INSTRUCTIONS)
78| 12553205| SCREW, PLASTITE, #8-16 x 1/2″
NS| N517| KIT, MATTRESS SIDE STOP, 76″ (TWO SIDE STOPS, FASTENERS,
INSTRUCTIONS – FOR 76″ HEAD SECTION, ALL FOOT
SECTIONS)
NS| N518| KIT, MATTRESS SIDE STOP, 80″ (TWO SIDE STOPS, FASTENERS, INSTRUCTIONS – FOR 80″ HEAD SECTION)
AVAILABILITY = NOT SHOWN
NOTE: ITEMS MARKED WITH ** OR *** – SEE DETAILS BELOWMATTRESS
STAFF CONTROL PANEL COMPONENTS
ULTRALOCK COMPONENTS
76″ AND 80″ 500-LB VERSIONS:
MODEL: ULTRACARE XT
*76″ MODEL HAS LIMITED SERVICE PART AVAILABILITY
| ITEM | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | 39001029AL | KIT, LEG ASSEMBLY w/ ULTRALOCK, HEAD (ALL PARTS SHOWN, |
HARDWARE, INSTRUCTIONS)
2| 39001030AL| KIT, LEG ASSEMBLY w/ ULTRALOCK, FOOT (ALL PARTS SHOWN,
HARDWARE, INSTRUCTIONS)
3| 39001031| KIT, ULTRALOCK FRONT COVER (ONE COVER, LABEL, FASTENERS,
INSTRUCIONS)
4| 39001032| KIT, ULTRALOCK REAR COVER (ONE COVER, FASTENERS, INSTRUCTIONS)
5| 39001033| KIT, ULTRALOCK FRONT COVER LABEL (ONE LABEL, INSTRUCTIONS)
6| 39001034| KIT, ULTRALOCK, CENTER PEDAL (PEDAL, FASTENERS, INSTRUCTIONS)
7| 39001035-M| KIT, ULTRALOCK, RIGHT SIDE PEDAL (PEDAL, CAP, FASTENERS,
INSTRUCTIONS)
8| 39001036-M| KIT, ULTRALOCK, LEFT SIDE PEDAL (PEDAL, CAP, FASTENERS,
INSTRUCTIONS)
9| 39001037-M| KIT, TUBE CAP, 1½” (ONE CAP, INSTRUCTIONS)
10| 39001038| KIT, TUBE CAP, 1⅛” (ONE CAP, INSTRUCTIONS)
11| 39001041-M| KIT, CASTER STEM ASSEMBLY (ONE CASTER, LOCK NUT, INSTRUCTIONS)
12| 39001042| KIT, CAUTION LABEL (ONE LABEL, INSTRUCTIONS)
PANEL COMPONENTS
76″ AND 80″ 500-LB VERSIONS:
MODEL: ULTRACARE XT
76 MODEL HAS LIMITED SERVICE PART AVAILABILITY
| ITEM | PART NUMBER | DESCRIPTION |
|---|---|---|
| 1 | 35000714AL | MOUNTING HARDWARE, HEAD PANEL (HEAD PANEL BRACKETS, SCREWS, |
INSTRUCTIONS)
2| 35000713AL| MOUNTING HARDWARE, PANEL SET (HEAD AND FOOT PANEL BRACKETS,
SCREWS, INSTRUCTIONS)
3| 12542520| SCREW, ¼-20 x 5/8″ (INCLUDED IN MOUNTING HARDWARE KITS)
Contacts
United States
- 2430 Whitehall Park Dr. Ste 700 Charlotte, NC 28273
- (P) 800.826.0270
- (F) 800.457.8827
Canada
- 35 Consortium Court London, ON Canada N6E 2S8
- (P) 866.546.1151
- (F) 519.451.8662
United Kingdom and Other Countries
- +44 (0)344 811 1158
Netherlands
- +31 (0)88 2080200
www.joerns.com
email: info@joerns.com
©2024 Joerns Healthcare • 6130063 RevI • 000796 • MAN1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>