AEOLUS P2-1201 Gadget Zone Installation Guide
- June 1, 2024
- AEOLUS
Table of Contents
AEOLUS P2-1201 Gadget Zone
Package Contents
| Item | Description | Quantity |
|---|---|---|
| A. | Case Fan | x1 |
| B. | Detachable Fan Blades | x1 |
| C. | Screws (Long) | x4 |
| D. | Screws (Short) | x4 |
| E. | Power and RGB Connector Cable | x1 |
| F. | Controller Connector Cable | x1 |
Turn off power
Safety Instructions
- Turn off power before installation or removal.
Installation Guide
Front and Back
Illustrations show the fan being installed onto the case’s front and back
sections.
Radiator Installation
- Attach the fan to the radiator by aligning the holes and using long screws.
- Position the fan onto the case and secure it with short screws.
- Attach the power and RGB connector cable.
- Ensure the fan is securely in place at the top of the case.
Fan Replacement
- Remove the existing fan blades by pulling them out.
- Use the controller connector cable (F) to attach to the new fan motor.
- Attach the new detachable fan blades (B) by pressing them onto the motor.
Connecting Multiple Fans
The illustrations demonstrate the connection of either two fans in a single
line or at a right angle to each other.
Detailed Instructions
For power and RGB connection, use the provided power and RGB connector cable (E) and attach it to the appropriate motherboard headers: D_LED, ADD_GEN2, ARGB_V2, or ADD2_LED. Alternatively, connect the cable to the CPU_FAN header for power.
Note: Additional purchases may be required to connect multiple fans as shown in the illustration.
Specifications
| Aspect | Detail |
|---|---|
| Model | Aeolus P2 |
| Compatibility | Cases & Radiators with Fan Support |
| Connection Type | D_LED, ADD_GEN2, ARGB_V2, ADD2_LED, CPU_FAN |
FAQ
How do I install the Aeolus P2 fan onto a radiator?
Use the long screws to attach the fan to the radiator align the holes and secure the fan in place.
Can I connect multiple Aeolus P2 fans together?
Yes you can connect multiple fans using the provided connector cables. You may need additional purchases for certain configurations.
What headers on the motherboard can the Aeolus P2 connect to?
The Aeolus P2 can connect to D_LED, ADD_GEN2 ARGB_V2 ADD2_LED and CPU_FAN headers on the motherboard.
What should I do before installing or removing the fan?
Always ensure that the power is turned off before beginning the installation or removal of the fan.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>